Shop By Brand

The Following brands are available based on your search.

  • AutoMeter
    AutoMeter
  • Edge
    Edge
  • Holley
    Holley
  • MSD
    MSD

Showing Products For 2008 Chevrolet Silverado 3500 HD Ignition Performance Module

Below are all the different brands and applications for 2008 Chevrolet Silverado 3500 HD Ignition Performance Module

Showing 1 - 10 of 10 Products for Ignition Performance Module.

Refine Your Search

AutoMeter
Ignition Performance Module AutoMeter

P311-3B9B317    9109  New

Qty:
In Stock & Ready to Ship
$102.37
AutoMeter Ignition Performance Module
  • FUEL SIGNAL ADAPTER FOR AUTOMETER GAUGES
  • FUEL SIGNAL ADAPTER FOR AUTOMETER GAUGES
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Allows You To Use Any AutoMeter Fuel Level Gauge
    • 3 Push Buttons w/LED Display For Easy Set Up
    • Low Fuel Level Warning At 10 Percent
    • 8 Pre-Programmed Resistance Ranges
    • Configurable Option w/Linear Adjustments At 5 Points
  • The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy set up. This unit is a compact size at 3 1/8 in. wide x 2 1/2 in. tall x 3/4 in. thick. A low fuel level warning is available at 10% and off at 15%. It can turn on an LED or relay.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: AutoMeter
Additional Fitment Information:
Vehicle
AutoMeter
Ignition Performance Module AutoMeter

P311-3E6A331    9113  New

Qty:
In Stock & Ready to Ship
$404.47
AutoMeter Ignition Performance Module
  • OBD-II DATA MODULE; CAN BRIDGE
  • CAN BRIDGE; OBD-II DATA MODULE FOR INVISION DASH AND AUTOMETER GAUGES
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Plug-N-Play
    • LCD Dashes And Autometer Tachometers
    • Electronic Speedometers
    • Short Sweep Electric Gauges
    • 6 Total Channels Available - Tachometer
    • Speedometer
    • Fuel Level
    • Temp
    • Pressure
    • Volts
    • Simplifies Instrumentation Wiring And Installation
    • No Sensors To Hookup
    • Which Means Less Wires To Connect And No Adapters To Worry About
    • Works with Most OBD-II Applications Which Is Standardized Across All OEMs Starting In 2008
    • Module Includes OLED Display And Five Push Buttons To Navigate Menus And Program System For Operation
    • Sensor Data Must Be Present On The Data Stream To Function
    • Otherwise A Discrete Sensor Must Be Used
    • Fuel Level Output Of 0 Ohms Empty And 90 Ohms Full
  • The CAN Bridge from AutoMeter is the ideal solution to streamline adding gauges or an InVision LCD dash to OBDII engine and vehicle platforms (2008+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive AutoMeter InVision dashes or AutoMeter tachometers, electronic speedometers, as well as short sweep electric temperature, pressure, fuel level, and volts gauges on your vehicle. Quickly and easily setup your system to output the available parameters of your choice utilizing the module's menu navigation buttons and OLED display. Simplify the next instrumentation installation on your ride with the advanced CAN Bridge system from AutoMeter!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: AutoMeter
Additional Fitment Information:
Vehicle
AutoMeter
Ignition Performance Module AutoMeter

P311-319B488    5323  New

Qty:
In Stock & Ready to Ship
$51.15
AutoMeter Ignition Performance Module
  • SIGNAL SPLITTER/ADAPTER; OBD-II
  • OBD-II SIGNAL SPLITTER/ADAPTER
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Device And Vehicle Compatibility May Vary
    • Maintain OBD-II Data Signal Integrity
  • This low profile OBD-II signal splitter / pass through alows for remote location of connections for AutoMeter products like AirDrive, DashLink, DashControl and SmartConnect instrumentation while providing an additional easy to access connection point for other onboard devices requiring access to the OBD-II data stream.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: AutoMeter
Additional Fitment Information:
Vehicle
MSD
Ignition Performance Module MSD

P311-5AC5051    7762  New

Qty:
In Stock & Ready to Ship
$324.14
MSD Ignition Performance Module
  • Power Grid Ignition Systemâ„¢ Boost/Retard Module
  • Power Grid Ignition Systemâ„¢ Boost/Retard Module; For Use w/MSD Power Grid System;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • USB Connection For Ease Of Programming
    • Timing Based On Engine RPM And Gear Value
    • Advanced Individual Cylinder Timing
    • Five Retard Stages For Nitrous
    • Four Steps Of RPM Limits
    • Output Switch Set On RPM/Pressure/Time
    • Shift Light Settings For Each Gear
    • Ignition Data Acquisition Accepts Multiple Runs
  • This Power Grid module does exactly as its name suggests; retards the ignition timing in relation to boost, pressure. It also has an output wire that can be used to activate another device based on boost pressure, as well as an overboost shut-down feature that will shut the ignition off if boost exceeds the overboost target.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Ignition Performance Module MSD

P311-452C50A    7730  New

Qty:
In Stock & Ready to Ship
$652.54
MSD Ignition Performance Module
  • Power Grid Ignition Systemâ„¢ Controller
  • Power Grid Ignition Systemâ„¢ Controller; Not Legal For Use Or Sale On Pollution Controlled Vehicles; Red;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • USB Connection For Ease Of Programming
    • Timing Based On Engine RPM And Gear Value
    • Advanced individual cylinder timing based on gear or time
    • Five Retard Stages For Nitrous
    • Four steps of rpm limits for burnout
    • spool
    • launch and overrev
    • Output switch set on rpm
    • pressure or time
    • Shift Light Settings For Each Gear
    • Ignition Data Acquisition Accepts Multiple Runs
    • Crank Trigger system highly recommended
  • The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based software is designed with tabs to help racers easily select different programming windows and parameters. Also, the data acquisition files of the ignition are now captured on a micro SD card for ease of storage and reviewing. The Power Grid Ignition incorporates CAN-Bus technology which reduces the amount of wiring and simplifies the addition of accessory modules. The CAN-Bus is a common harness that accessory controls are connected to and easily brought into the programming library of the View Software. With this technology, racers can connect the Power Grid system directly into their Racepak Data Recorder and other Racepak products. The Power Grid Controller is the brains behind the entire system and can be used with any MSD Ignition or the Pro Mag to provide advance ignition tuning capabilities. While it is compatible with all MSD boxes, the new Power Grid System Controller has been specially designed to mount to the Power Grid-7 box. Also, this new Ignition packs higher output than the current programmable units! The Power Grid Controller is supplied with the View Software, wiring harness, micro-SD card and mounting hardware. The ignition, available separately, is supplied with the harness and mounting hardware. NOTE: To use any modules with the Power Grid Ignition System, PN 7720 and 7730, users MUST plug the modules into a 4-Connector CAN-Bus Hub PN 7740 to be attached to the Power Grid System Controller.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Ignition Performance Module MSD

P311-44266FA    77303  New

Qty:
In Stock & Ready to Ship
$652.54
MSD Ignition Performance Module
  • Power Grid Ignition Systemâ„¢ Controller
  • Power Grid Ignition Systemâ„¢ Controller; For Use w/Ignition Control PN[7720]; Compatible w/Other MSD Ignition Boxes; Requires Windows-based Laptop For Configuration; Black;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Five Retard Stages For Nitrous
    • Four Steps Of RPM Limits
    • Advanced Individual Cylinder Timing
    • Timing Based On Engine RPM And Gear Value
    • Shift Light Settings For Each Gear
    • Ignition Data Acquisition Accepts Multiple Runs
    • USB Connection For Ease Of Programming
    • Output Switch Set On RPM/Pressure/Time
  • The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based software is designed with tabs to help racers easily select different programming windows and parameters. Also, the data acquisition files of the ignition are now captured on a micro SD card for ease of storage and reviewing. The Power Grid Ignition incorporates CAN-Bus technology which reduces the amount of wiring and simplifies the addition of accessory modules. The CAN-Bus is a common harness that accessory controls are connected to and easily brought into the programming library of the View Software. With this technology, racers can connect the Power Grid system directly into their Racepak Data Recorder and other Racepak products. The Power Grid Controller is the brains behind the entire system and can be used with any MSD Ignition or the Pro Mag to provide advance ignition tuning capabilities. While it is compatible with all MSD boxes, the new Power Grid System Controller has been specially designed to mount to the Power Grid-7 box. Also, this new Ignition packs higher output than the current programmable units! The Power Grid Controller is supplied with the View Software, wiring harness, micro-SD card and mounting hardware. The ignition, available separately, is supplied with the harness and mounting hardware. NOTE: To use any modules with the Power Grid Ignition System, PN 7720 and 7730, users MUST plug the modules into a 4-Connector CAN-Bus Hub PN 7740 to be attached to the Power Grid System Controller.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Edge
Ignition Performance Module Edge

P311-305E182    98620  New

Qty:
In Stock & Ready to Ship
$186.05
Edge Ignition Performance Module
  • Edge Accessory System Starter Kit
  • Edge Accessory System Starter Kit; w/15 in. EGT Cable For CS/CTS/CS2/CTS2; Expandable;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Ideal For The Daily Diesel Driver
    • Connect To Multiple EGT Sensors To Monitor Multiple Temps
    • Monitor Exhaust Gas Temperatures
  • The Edge accessory system (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the evolution CS or CTS. This means Edge can create optional accessories that can be added to the products by the owner at any time. An optional exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge. Look for a variety of other optional accessories to become available in the near future.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edge
Additional Fitment Information:
Vehicle
Edge
Ignition Performance Module Edge

P311-0F05455    98609  New

Qty:
In Stock & Ready to Ship
$177.02
Edge Ignition Performance Module
  • Edge Accessory System Power Switch
  • Edge Accessory System Power Switch; w/Starter Kit;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • For Future Upgrades To Evolution CS Or CTS
    • Hook Up Accessories And Engage From CTS
  • The EAS Power Switch allows connectivity for accessories like aftermarket lights, air compressors and more. You can now control/engage these accessories from the CTS2 screen. Name your accessory to display right on the screen and take advantage of Edge's clean EAS daisy-chain link system to turn your truck's tools on/off. Gone are the days of drilling holes in your dash to install manual switches; do it all from the CTS2! Learn more about the Power Switch by visiting edgeproducts.com.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edge
Additional Fitment Information:
Vehicle
Holley
Ignition Performance Module Holley

P311-2A238BA    556-154  New

Qty:
In Stock & Ready to Ship
$397.52
Holley Ignition Performance Module
  • Sniper EFI Hyperspark 2 Ignition Box
  • Sniper EFI Hyperspark 2 Ignition Box; Includes Ignition Harness;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Plug And Play With Existing Hyperspark Installations/Or Sniper EFI Hyperspark Main Harnesses
    • Includes An Ignition Harness For Fresh Sniper Efi Installs Simply Wanting To Add Timing Control
    • New Processor And Board Design Provide A Highly Efficient Ignition
    • High RPM Operation And Maximum Output Using The Hyperspark Ignition Coil
    • Consistently High Spark Energy Of 135Mj To 150Mj For Every Firing/From Idle To Redline Rpm
    • Operates On Most 7 To 28-Volt Electrical Systems
    • Fully Protected Against An Open Coil/Shorted Coil And Open Load
    • Quickens Throttle Response And Improves Starting
    • Tach Output To Drive An External Tachomete
  • The HyperSpark 2 ignition box packs all of the proven features of its predecessor into a smaller form factor package, making it easier to mount, providing the cleanest installation possible. This ignition box packs up to 150mj of spark energy when used with its matching ignition coil, PN 556-152, resulting in enough energy to safely fire your Sniper EFI engine combination.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Ignition Performance Module Holley

P311-022962D    556-151  New

Qty:
In Stock & Ready to Ship
$418.87
Holley Ignition Performance Module
  • Sniper EFI Hyperspark CD Ignition Box
  • Sniper EFI Hyperspark CD Ignition Box; Includes Ignition/Harness/Mounting Screws/Lock Washers;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Designed To Work w/Sniper EFI - Minimal Wiring Required
    • Hall Effect Crank Sensor In Billet Dist. Housing
    • Provides A Noise Free Signal To Sniper ECU
    • Pre-Terminated Ignition Coil Connector
    • Ignition Box is Sealed and Powdercoated For Harshest Of Locations
    • LED on Ign. Box Helps Verify 12V/Cranking RPM/Low Battery Volts
  • Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing HyperSpark Ignition, from Sniper EFI. The complete system consists of a CD Ignition Box, Billet distributor with Hall effect crank signal sensor, an ignition coil, and complete wiring harness ready to plug and play with your Sniper EFI System

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 10 Products for Ignition Performance Module.