Finish Selecting Your Vehicle

Choose your Engine for your 2008 Chevrolet Silverado 3500 HD

  • 8 Cyl 6.0L
  • 8 Cyl 6.6L

Shop By Brand

The Following brands are available based on your search.

  • AP Exhaust
    AP Exhaust
  • BBK Performance
    BBK Performance
  • Borla
    Borla
  • Corsa
    Corsa
  • Dynomax
    Dynomax
  • FlowTech
    FlowTech
  • Flowmaster
    Flowmaster
  • Gibson
    Gibson
  • Hooker
    Hooker
  • MBRP Exhaust
    MBRP Exhaust
  • Magnaflow
    Magnaflow
  • Pypes Performance exhaust
    Pypes Performance exhaust
  • SLP Performance
    SLP Performance
  • Stainless Works
    Stainless Works
  • Vibrant Performance
    Vibrant Performance
  • Walker Exhaust
    Walker Exhaust

Showing Products For 2008 Chevrolet Silverado 3500 HD Exhaust Muffler

Below are all the different brands and applications for 2008 Chevrolet Silverado 3500 HD Exhaust Muffler

Showing 1 - 10 of 347 Products for Exhaust Muffler.

Refine Your Search

AP Exhaust
2008 Chevrolet Silverado 3500 HD Exhaust Muffler 8 Cyl 6.0L AP Exhaust

P311-3E58279    2589  New

Qty:
In Stock & Ready to Ship
$160.74
AP Exhaust Exhaust Muffler
  • Muffler - Challenge
  • Challenge LTW OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. 3500 HD Silverado/Sierra; Excludes Cab/Chassis
  • Muffler - Challenge; Oval Body - H8.5" X W11.5" X L20"; 26" OAL; 3.5" ID Config. O-OO
  • Product Attributes:
    • Body Height: 8.5
    • Body Material: Aluminized Steel
    • Body Width: 11.5
    • Grade Type: Regular
    • Heat Shield Attached: No
    • Inlet Inside Diameter: 3.5
    • Inlet Location: Right Center
    • Inlet Type: Pipe
    • Muffler Configuration: O/oo
    • Muffler Type: Baffled
    • Outlet Inside Diameter: 3.5
    • Outlet Location: Left Center
    • Outlet Type: Pipe
    • Overall Length: 26
    • Shape: Oval
    • Sound Level: Oe Comparable
    • Tunable: No
Brand: AP Exhaust
Additional Fitment Information:
Vehicle Drive Type Wheel FeedBase Block Engine CID CC
2008 - Chevrolet Silverado 3500 HD 4WD 157.5 V 8 Cyl 6.0L 364 5967
Walker Exhaust
2008 Chevrolet Silverado 3500 HD Exhaust Muffler 8 Cyl 6.0L Walker Exhaust - Dynomax Ultra Flo Welded Universal Muffler

P311-1681896    17557  New

Qty:
In Stock & Ready to Ship
$149.92
Walker Exhaust Exhaust Muffler
  • Ultra Flo Exhaust Muffler
  • Ultra Flo Welded, Deep Performance Tone, Natural, Universal Fit, Inlet - 4 Offset, Outlet - 4 Offset
  • Dynomax Ultra Flo Welded Universal Muffler
  • Product Attributes:
    • Body Height: 8.25
    • Body Length: 25
    • Body Width: 11.5
    • Grade Type: Performance
    • Inlet 1 Inside Diameter: 4
    • Inlet 1 Type: Pipe Connection
    • Inlet Configuration: Offset
    • Inlet Inside Diameter: 4
    • Inlet Offset: 2.5
    • Inlet Type: Pipe Connection
    • Muffler Sound: Deep Performance Tone
    • Muffler Type: Absorption
    • Outlet 1 Inside Diameter: 4
    • Outlet 1 Type: Pipe Connection
    • Outlet Configuration: Offset
    • Outlet Inside Diameter: 4
    • Outlet Type: Pipe Connection
    • Overall Length: 30
    • Reversible: No
    • Shape: Oval
    • Sound Level: Deep Performance Tone
    • Tunable: No
  • DynoMax® Ultra Floâ„¢ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax® Ultra Floâ„¢ Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guaranteeâ„¢.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle Wheel FeedBase Block Engine CID CC
2008 - Chevrolet Silverado 3500 HD 133.0 V 8 Cyl 6.0L 364 5967
Walker Exhaust
2008 Chevrolet Silverado 3500 HD Exhaust Muffler 8 Cyl 6.0L Walker Exhaust - Walker Quiet-Flow Muffler

P311-3F3E7A8    21706  New

2589

Qty:
In Stock & Ready to Ship
$290.15
Walker Exhaust Exhaust Muffler
  • Quiet-Flow Exhaust Muffler
  • Premium Limited Lifetime Warranty If welded assembly, replace all required parts
  • Quiet-Flow, Aluminized, Specific Fit, Inlet - 3.5 Offset, Outlet - 3.5 Offset
  • Walker Quiet-Flow Muffler
  • Product Attributes:
    • Body Height: 11
    • Body Length: 25
    • Body Material: Steel
    • Body Width: 11
    • Grade Type: Regular
    • Inlet 1 Inside Diameter: 3.5
    • Inlet 1 Type: Pipe Connection
    • Inlet Configuration: Offset
    • Inlet Inside Diameter: 3.5
    • Inlet Offset: 2.75
    • Inlet Type: Pipe Connection
    • Muffler Type: Reflection
    • Outlet 1 Inside Diameter: 3.5
    • Outlet 1 Type: Pipe Connection
    • Outlet Configuration: Offset
    • Outlet Inside Diameter: 3.5
    • Outlet Type: Pipe Connection
    • Overall Length: 31
    • Reversible: No
    • Shape: Round
    • Tunable: No
  • Designed to deliver superior flow and OE-style sound, Walker® Quiet-Flow® mufflers are available for top-selling domestic and foreign vehicles. Quiet-Flow mufflers are backed by Walker's limited lifetime warranty and 90-day Safe and Sound® guarantee.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle Body Block Engine CID CC
2008 - Chevrolet Silverado 3500 HD Crew Cab Pickup V 8 Cyl 6.0L 364 5967
Flowmaster
2008 Chevrolet Silverado 3500 HD Exhaust Muffler 8 Cyl 6.0L Flowmaster - 50 Seriesâ„¢ Heavy Duty Muffler

P311-4C86B12    953558  New

Qty:
In Stock & Ready to Ship
$269.25
Flowmaster Exhaust Muffler
  • 3.5 in. Offset Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel
  • 50 Seriesâ„¢ Heavy Duty Muffler; 3.5 in. Offset Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel;
  • 50 Seriesâ„¢ Heavy Duty Muffler
  • Product Attributes:
    • Automotive Item Grade: High Performance
    • Body Length: 18.000 In.
    • Body Width: 10.000 In.
    • Fitment: Universal
    • Inlet Connection Type: Pipe
    • Inlet Position: Offset
    • Inlet Type: Single Offset
    • Mount Type: Uses New Hangers (not Included)
    • Muffler Series: 50 Series Hd
    • Muffler Type: Reflection
    • Outlet Connection Type: Pipe
    • Outlet Position: Offset
    • Outlet Type: Single Offset Outlet
    • Overall Length: 23.000 In.
    • Shape: Oval
    • Sound Level: Moderate
    • Tip Quantity: 0
    • WARNING CA Proposition 65: No
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Aggressive And Powerful Exterior Exhaust Tone
    • Notable Interior Resonance
    • Excellent Street/Strip And Off Road Application
    • No Internal Packing To Blowout
    • The Original Two Chamber Design
    • Premium Flowmaster Quality
    • Improved HP/TQ and Engine Efficiency
  • Designed primarily for todays heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for trucks with modified engines. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Flowmaster
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Chevrolet Silverado 3500 HD V 8 Cyl 6.0L 364 5967
Flowmaster
2008 Chevrolet Silverado 3500 HD Exhaust Muffler 8 Cyl 6.0L Flowmaster - 50 Series Heavy Duty Muffler

P311-4C86B12    953558  New

Qty:
In Stock & Ready to Ship
$269.25
Flowmaster Exhaust Muffler
  • 50 Seriesâ„¢ Heavy Duty Muffler
  • 3.5 in. Offset Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel
  • 50 Seriesâ„¢ Heavy Duty Muffler; 3.5 in. Offset Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel;
  • 50 Series(TM) Heavy Duty Muffler
  • Product Attributes:
    • Automotive Item Grade: High Performance
    • Body Length: 18.000 In.
    • Body Width: 10.000 In.
    • Fitment: Universal
    • Inlet Connection Type: Pipe
    • Inlet Position: Offset
    • Inlet Type: Single Offset
    • Mount Type: Uses New Hangers (not Included)
    • Muffler Series: 50 Series Hd
    • Muffler Type: Reflection
    • Outlet Connection Type: Pipe
    • Outlet Position: Offset
    • Outlet Type: Single Offset Outlet
    • Overall Length: 23.000 In.
    • Shape: Oval
    • Sound Level: Moderate
    • Tip Quantity: 0
    • WARNING CA Proposition 65: No
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Aggressive And Powerful Exterior Exhaust Tone
    • Notable Interior Resonance
    • Excellent Street/Strip And Off Road Application
    • No Internal Packing To Blowout
    • The Original Two Chamber Design
    • Premium Flowmaster Quality
    • Improved HP/TQ and Engine Efficiency
  • Designed primarily for todays heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for trucks with modified engines. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Flowmaster
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Chevrolet Silverado 3500 HD V 8 Cyl 6.0L 364 5967
Pypes Performance exhaust
Exhaust Muffler Pypes Performance exhaust

P311-59D9865    MVR13  New

Qty:
In Stock & Ready to Ship
$116.94
  • Race Pro 14in. 2.5in. off/center
  • Race Pro 14in. 2.5in. off/center
  • Product Attributes:
    • Body Height: N/a
    • Body Length: 14.000 In.
    • Body Width: N/a
    • Inlet Connection Type: Clamp-on
    • Inlet Inside Diameter: 2.500 In.
    • Inlet Outside Diameter: 2.500 In.
    • Inlet Position: Offset
    • Inlet Type: Single Offset
    • Main Piping Diameter: 2.500 In.
    • Muffler Count: 1
    • Outlet Outside Diameter: 2.500 In.
    • Outlet Position: Center
    • Outlet Type: Single Center Outlet
    • Overall Length: 14.000 In.
    • Shape: Rectangular
    • Tip Quantity: 0
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
  • Features:
    • Stainless Steel Construction Resists Corrosion
    • Welded Case Ensures Long Life And No Rattle
    • Designed To Match Your Needs
    • Limited Lifetime Warranty
    • Highly Recommended For The Track Where Every 1/10th Counts
    • Welded Case Makes For A Sturdy Muffler That Will Not Rattle
    • Resists Corrosion
    • Superior Flow Improves Gas Mileage
    • Delivers The Ultimate In Sound And Performance
    • Race Pro Muffler
  • Sometimes you just gotta have the best of everything. When it comes to flow, you just can't get anything better than our Race Pro Muffler. This baby features a 'straight through' path that guarantees throughput that's 99% of straight tubing! The sound is surprisingly calm considering the absence of any impedance when you look down its barrel. At idle and low rpm cruising, you will not draw much attention, but upon acceleration, bystanders lookout! The Race Pros aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of rock wool before the unit is sealed. Highly recommended for the track where every 1/10th counts. Of course, there are plenty of these mufflers hidden under some fine street machines too. Not recommended on lower horsepower vehicles as low end torque may suffer. Think of these mufflers as large inhalers for your engine. The welded case makes for a sturdy muffler that will not rattle. The stainless construction of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage. Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. 409 Stainless steel construction resists corrosion. Welded case ensures long life and no rattle. 5 unique designs. One will match your needs! Limited Lifetime Warranty. Sound Rating = [7.0].

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Pypes Performance exhaust
Additional Fitment Information:
Vehicle
Pypes Performance exhaust
Exhaust Muffler Pypes Performance exhaust

P311-33532FD    MVR200S  New

Qty:
In Stock & Ready to Ship
$86.31
Pypes Performance exhaust Exhaust Muffler
  • M-80 2.5in. round STNLS
  • M-80 2.5in. round STNLS
  • Product Attributes:
    • Body Length: 14.000 In.
    • Inlet Inside Diameter: 2.500 In.
    • Inlet Outside Diameter: 2.500 In.
    • Inlet Position: Center
    • Inlet Type: Single Center
    • Main Piping Diameter: 2.500 In.
    • Muffler Count: 1
    • Outlet Outside Diameter: 2.500 In.
    • Outlet Position: Center
    • Outlet Type: Single Center Outlet
    • Overall Length: 14.000 In.
    • Shape: Round
    • Tip Quantity: 0
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
  • Features:
    • Stainless Steel Construction Resists Corrosion
    • Welded Case Ensures Long Life And No Rattle
    • Designed To Match Your Needs
    • Limited Lifetime Warranty
    • Highly Recommended For The Track Where Every 1/10th Counts
    • Welded Case Makes For A Sturdy Muffler That Will Not Rattle
    • Resists Corrosion
    • Superior Flow Improves Gas Mileage
    • Delivers The Ultimate In Sound And Performance
    • 2.5 in. M-80 Muffler
    • 304 Polished Stainless
  • Sometimes you just gotta have the best of everything. When it comes to flow, you just can't get anything better than our Race Pro Muffler. This baby features a 'straight through' path that guarantees throughput that's 95% of straight tubing! The sound is surprisingly tame considering the absence of any impedance when you look down its barrel. At idle and low rpm cruising, you will not draw much attention, but upon acceleration, bystanders lookout! The Race Pros aggressive sound is the result of applying a layer of stainless mesh around a unique internal 3.5 in. perforated tube, accompanied by a healthy stuffing of rockwool insulation before the unit is sealed. Highly recommended for the track where every 1/10th counts. This 4 in. round version is also great for many street rod applications. Think of these mufflers as large inhalers for your engine. The welded case makes for a sturdy muffler that will not rattle. The stainless construction of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage. Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. Stainless steel construction resists corrosion. Welded case ensures long life and no rattle. 5 unique designs. One will match your needs! Limited Lifetime Warranty.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Pypes Performance exhaust
Additional Fitment Information:
Vehicle
Pypes Performance exhaust
Exhaust Muffler Pypes Performance exhaust

P311-3F45EAC    MVS10  New

Qty:
In Stock & Ready to Ship
$117.03
  • Street Pro 14in. 2.5in. off/off
  • Street Pro 14in. 2.5in. off/off
  • Product Attributes:
    • Body Height: N/a
    • Body Length: 14.000 In.
    • Body Width: N/a
    • Inlet Connection Type: Clamp-on
    • Inlet Inside Diameter: 2.500 In.
    • Inlet Outside Diameter: 2.500 In.
    • Inlet Position: Offset
    • Inlet Type: Single Offset
    • Main Piping Diameter: 2.500 In.
    • Muffler Count: 1
    • Outlet Outside Diameter: 2.500 In.
    • Outlet Position: Offset
    • Outlet Type: Single Offset
    • Overall Length: 14.000 In.
    • Shape: Rectangular
    • Tip Quantity: 0
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
  • Features:
    • Stainless Steel Construction Resists Corrosion
    • Welded Case Ensures Long Life And No Rattle
    • Designed To Match Your Needs
    • Limited Lifetime Warranty
    • Highly Recommended For The Track Where Every 1/10th Counts
    • Welded Case Makes For A Sturdy Muffler That Will Not Rattle
    • Resists Corrosion
    • Superior Flow Improves Gas Mileage
    • Delivers The Ultimate In Sound And Performance
    • Street Pro Muffler
  • Don't let the looks of this muffler fool you. Although at idle, you may cause passengers to immediately reach for their seat belts, upon acceleration, a smooth authoritative tone turns apprehension into a reassuring confidence. This is a great street/strip muffler that will maintain its rich sound qualities for the life of the muffler because there is no filler to burn off. Recommended for stock to medium modified vehicles where an aggressive sound is appreciated but not advertised. Designed with acoustics in mind, these resonance chambers create the unique sound of this muffler and keep it that way for years to come. The welded case makes for a sturdy muffler that will not rattle. The aluminizing and seam-coating treatment of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage. Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. Sound Rating = [7.0]

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Pypes Performance exhaust
Additional Fitment Information:
Vehicle
Pypes Performance exhaust
Exhaust Muffler Pypes Performance exhaust

P311-0869283    MVR203S  New

Qty:
In Stock & Ready to Ship
$97.24
Pypes Performance exhaust Exhaust Muffler
  • M-80 3in. x 14in. round Muffler
  • M-80 3in. x 14in. round Muffler
  • Product Attributes:
    • Body Length: 14.000 In.
    • Inlet Position: Center
    • Inlet Type: Single Center
    • Muffler Count: 1
    • Outlet Position: Center
    • Outlet Type: Single Center Outlet
    • Overall Length: 14.000 In.
    • Shape: Round
    • Tip Quantity: 0
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
  • Features:
    • Stainless Steel Construction Resists Corrosion
    • Welded Case Ensures Long Life And No Rattle
    • Designed To Match Your Needs
    • Limited Lifetime Warranty
    • Highly Recommended For The Track Where Every 1/10th Counts
    • Welded Case Makes For A Sturdy Muffler That Will Not Rattle
    • Resists Corrosion
    • Superior Flow Improves Gas Mileage
    • Delivers The Ultimate In Sound And Performance
    • 3 in. M-80 Muffler
    • 304 Polished Stainless
  • Sometimes you just gotta have the best of everything. When it comes to flow, you just can't get anything better than our Race Pro Muffler. This baby features a straight through path that guarantees throughput that's 95% of straight tubing! The sound is surprisingly tame considering the absence of any impedance when you look down its barrel. At idle and low rpm cruising, you will not draw much attention, but upon acceleration, bystanders lookout! The Race Pros aggressive sound is the result of applying a layer of stainless mesh around a unique internal 3.5 in. louvered tube, accompanied by a healthy stuffing of basault insulation before the unit is sealed. Highly recommended for the track where every 1/10th counts. This 4 in. round version is also great for many street rod applications. Think of these mufflers as large inhalers for your engine. The welded case makes for a sturdy muffler that will not rattle. The stainless construction of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage. Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. Stainless steel construction resists corrosion. Welded case ensures long life and no rattle. 5 unique designs. One will match your needs! Limited Lifetime Warranty.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Pypes Performance exhaust
Additional Fitment Information:
Vehicle
Dynomax
2008 Chevrolet Silverado 3500 HD Exhaust Muffler 8 Cyl 6.6L Dynomax - Race Series Bullet Muffler

P311-512BB48    24233  New

Qty:
In Stock & Ready to Ship
$133.52
Dynomax Exhaust Muffler
  • DynoMax Race Collector Muffler
  • Round; 6 in.; Center Inlet And Outlet 5 in. Dia.; 16 in. Shell Length; 21 in. Overall Length New Body Style
  • DynoMax Race Collector Muffler
  • Race Series Bullet Muffler
  • Product Attributes:
    • Body Height: 6.000 In.
    • Body Length: 16.000 In.
    • Body Shape: Round
    • Body Width: 6.000 In.
    • Class: Pb
    • Fitment: Universal
    • Flow Director: Yes
    • Inlet Connection Type: Pipe
    • Inlet Diameter Designation: Inside Diameter
    • Inlet Position: Center
    • Inlet Quantity: 1
    • Inlet Type: Single Center
    • Max Airflow Dual: 2000.000
    • Max Airflow Single: 1000.000
    • Max Year Covered: 2012
    • Min Year Covered: 2007
    • Most Popular Make/Model: Dodge Ram 2500
    • Most Popular Year: 2012
    • Muffler Count: 1
    • Outlet Configuration: Center
    • Outlet Connection Type: Pipe
    • Outlet Diameter Designation: Inside Diameter
    • Outlet Position: Center
    • Outlet Quantity: 1
    • Outlet Type: Single Center Outlet
    • Overall Length: 21.000 In.
    • Product Grade: Premium
    • Shape: Round
    • Tip Quantity: 0
    • Total Part VIO: 451254
    • WARNING CA Proposition 65: No
  • Features:
    • 100% Welded
    • Lightweight Construction
    • Unrestricted Straight Through Design
    • Exclusive Continuous Roving Fiberglass Tech.
    • Up To 4 dbA Sound Reduction On Most Race Applications
    • Proudly Manufactured In The USA
  • DynoMax(R) Race Bullet mufflers feature 100-percent welded construction for lifelong durability. The 'Pure Unadulterated POWER' and lightweight, compact design make it the ultimate race muffler. The unrestricted, straight-through design is dyno tested and track proven. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology which helps provide up to a 4 dbA sound reduction, on most race applications, while maintaining a deep race tone.
Brand: Dynomax
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Chevrolet Silverado 3500 HD V 8 Cyl 6.6L 403 6599

Showing 1 - 10 of 347 Products for Exhaust Muffler.