Finish Selecting Your Vehicle

Choose your Submodel for your 2008 Chevrolet Impala

  • 50th Anniversary Edition
  • LS
  • LT
  • LTZ
  • Police
  • SS

Shop By Brand

The Following brands are available based on your search.

  • ATP
    ATP
  • B&M
    B&M
  • Genuine
    Genuine
  • PRW
    PRW
  • Pioneer Cable
    Pioneer Cable
  • Quick Time
    Quick Time
  • TCI Automotive
    TCI Automotive

Showing Products For 2008 Chevrolet Impala Automatic Transmission Flexplate

Below are all the different brands and applications for 2008 Chevrolet Impala Automatic Transmission Flexplate

Showing 1 - 10 of 38 Products for Automatic Transmission Flexplate.

Refine Your Search

Genuine
2008 Chevrolet Impala Automatic Transmission Flexplate Genuine

P311-2794691    W0133-1865916  New

Qty:
In Stock & Ready to Ship
$200.28
Genuine Automatic Transmission Flexplate
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Genuine
Additional Fitment Information:
Vehicle Submodel
2008 - Chevrolet Impala 50th Anniversary Edition
TCI Automotive
2008 Chevrolet Impala Automatic Transmission Flexplate 8 Cyl 5.3L TCI Automotive

P311-0C02B62    399753  New

Qty:
In Stock & Ready to Ship
$441.65
  • Internal Balance
  • This machined flexplate is for GM LS Series engines (4.8,5.3,5.7,6.0). SFI 29.1 approved and internally balanced. Features 11.1", small bolt circle. 168 Tooth Count.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Chevrolet Ls Flexplate; Small Bolt Pattern; 168 Tooth Count; Internal Balance
  • Aftermarket Chevrolet and Pontiac machined flywheels are .140" thick and built to handle even the toughest applications. Constructed from the same A514 Blanchard ground steel and neutral balanced with 168-tooth (Chevy) and 166-tooth (Pontiac) starter rings. These machined flywheels are designed for specific application engines. These machined flexplates are a "must have" for moderate to serious performance applications.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle Engine Designation Engine Version Block Engine CID CC
2008 - Chevrolet Impala LS4 N/R V 8 Cyl 5.3L 325 5328
TCI Automotive
2008 Chevrolet Impala Automatic Transmission Flexplate 8 Cyl 5.3L TCI Automotive

P311-5F5A322    399754  New

Qty:
In Stock & Ready to Ship
$441.65
  • Internal Balance.
  • This machined flexplate is for GM LS Series engines (4.8,5.3,5.7,6.0). SFI 29.1 approved and internally balanced. Features 11.1", Wide bolt circle. 168 Tooth Count.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Chevrolet Ls Flexplate; Wide Bolt Pattern; 168 Tooth Count; Internal Balance.
  • Aftermarket Chevrolet and Pontiac machined flywheels are .140" thick and built to handle even the toughest applications. Constructed from the same A514 Blanchard ground steel and neutral balanced with 168-tooth (Chevy) and 166-tooth (Pontiac) starter rings. These machined flywheels are designed for specific application engines. These machined flexplates are a "must have" for moderate to serious performance applications.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle Engine Designation Engine Version Block Engine CID CC
2008 - Chevrolet Impala LS4 N/R V 8 Cyl 5.3L 325 5328
TCI Automotive
2008 Chevrolet Impala Automatic Transmission Flexplate 8 Cyl 5.3L TCI Automotive

P311-5F5A322    399754  New

Qty:
In Stock & Ready to Ship
$441.65
  • Internal Balance.
  • This machined flexplate is for GM LS Series engines (4.8,5.3,5.7,6.0). SFI 29.1 approved and internally balanced. Features 11.1", Wide bolt circle. 168 Tooth Count.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Chevrolet Ls Flexplate; Wide Bolt Pattern; 168 Tooth Count; Internal Balance.
  • Aftermarket Chevrolet and Pontiac machined flywheels are .140" thick and built to handle even the toughest applications. Constructed from the same A514 Blanchard ground steel and neutral balanced with 168-tooth (Chevy) and 166-tooth (Pontiac) starter rings. These machined flywheels are designed for specific application engines. These machined flexplates are a "must have" for moderate to serious performance applications.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle Engine Designation Engine Version Block Engine CID CC
2008 - Chevrolet Impala LS4 N/R V 8 Cyl 5.3L 325 5328
TCI Automotive
2008 Chevrolet Impala Automatic Transmission Flexplate 8 Cyl 5.3L TCI Automotive

P311-0C02B62    399753  New

Qty:
In Stock & Ready to Ship
$441.65
  • Internal Balance
  • This machined flexplate is for GM LS Series engines (4.8,5.3,5.7,6.0). SFI 29.1 approved and internally balanced. Features 11.1", small bolt circle. 168 Tooth Count.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Chevrolet Ls Flexplate; Small Bolt Pattern; 168 Tooth Count; Internal Balance
  • Aftermarket Chevrolet and Pontiac machined flywheels are .140" thick and built to handle even the toughest applications. Constructed from the same A514 Blanchard ground steel and neutral balanced with 168-tooth (Chevy) and 166-tooth (Pontiac) starter rings. These machined flywheels are designed for specific application engines. These machined flexplates are a "must have" for moderate to serious performance applications.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle Engine Designation Engine Version Block Engine CID CC
2008 - Chevrolet Impala LS4 N/R V 8 Cyl 5.3L 325 5328
PRW
2008 Chevrolet Impala Automatic Transmission Flexplate 8 Cyl 5.3L PRW - Flexplate

P311-161B8BB    1834610  New

Qty:
In Stock & Ready to Ship
$136.31
  • Superseded To PN[1835004] GM 3 x 10.5 in.~GM 3 x 10.75 in.~GM 6 x 11 in.~GM 6 x 11.5 in.~Will Fit Turbo 350/400 Transmissions w/Adapter
  • Flexplate; Superseded To PN[1835004];
  • Flexplate
  • Features:
    • Platinum Series
    • SFI 29.1 Certified
    • Double Welded Ring Gears
    • White Zinc Finish Helps Prevent Rust
    • Forged From Cold Rolled Steel
    • 4mm Thick Centerplate Provides Solid Foundation
  • Xtreme Duty SFI-Rated flex plates are engineered to handle extreme performance applications and designed to take the punishment of today's high horsepower engines. The 4mm thick center plate provides a solid foundation for these new designs. Ring gears are precision welded to meet SFI specifications, utilizing robotic machinery and a cold-welding process. Platinum Series Flexplate are engineered for excellence and are rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW.
Brand: PRW
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2008 - Chevrolet Impala SS V 8 Cyl 5.3L 325 5328
PRW
2008 Chevrolet Impala Automatic Transmission Flexplate 8 Cyl 5.3L PRW - Flexplate

P311-1137EFB    1834624  New

Qty:
In Stock & Ready to Ship
$138.29
  • Platinum Series; SFI Spec 29.1; 168 Teeth; Internal Balance; 4mm Thick; Will Fit Specialty 6 Bolt 350 Turbo/400 Convertors w/Adapter; High Inertia Design; Steel GM 3 x 10.5 in.~GM 3 x 10.75 in.~GM 6 x 11 in.~GM 6 x 11.5 in.
  • Flexplate; Platinum Series; SFI Spec 29.1; 168 Teeth; Internal Balance; 4mm Thick; Will Fit Specialty 6 Bolt 350 Turbo/400 Convertors w/Adapter; High Inertia Design; Steel;
  • Flexplate
  • Features:
    • Gold Series
    • SFI 29.1 Certified
    • Direct Bolt On Component
    • Forged One Piece Steel Ring Gears
    • 0.03 Thicker Than Stock Flexplates
    • Constructed From Cold Rolled Chromoly Steel
    • Long Lasting Gold Irradiate Finish That Helps Prevent Rust
    • Double Welded Ring Gears For Added Durability
  • PRW Gold Series flex plates raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These Gold Series Flex plates are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. The 4mm thick center plate provides a solid foundation for these new designs. Ring gears are precision welded to meet SFI specifications, utilizing robotic machinery and cold-welding process. PRW flex plates are engineered for excellence and are rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.
Brand: PRW
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2008 - Chevrolet Impala SS V 8 Cyl 5.3L 325 5328
PRW
2008 Chevrolet Impala Automatic Transmission Flexplate 8 Cyl 5.3L PRW - Flexplate

P311-4AE2EE1    1834600  New

Qty:
In Stock & Ready to Ship
$104.55
  • PRW Gold Series; SFI-rated; OEM Compatible; 168 Teeth; Internal Balance GM 3 x 10.75 in.~GM 3 x 11 in.
  • Flexplate; PRW Gold Series; SFI-rated; OEM Compatible; 168 Teeth; Internal Balance;
  • Flexplate
  • Features:
    • Gold Series
    • SFI 29.1 Certified
    • Direct Bolt On Component
    • Forged One Piece Steel Ring Gears
    • 0.03 Thicker Than Stock Flexplates
    • Constructed From Cold Rolled Chromoly Steel
    • Long Lasting Gold Irradiate Finish That Helps Prevent Rust
    • Double Welded Ring Gears For Added Durability
  • PRW Gold Series flex plates raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These Gold Series Flex plates are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. The 4mm thick center plate provides a solid foundation for these new designs. Ring gears are precision welded to meet SFI specifications, utilizing robotic machinery and cold-welding process. PRW flex plates are engineered for excellence and are rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.
Brand: PRW
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2008 - Chevrolet Impala SS V 8 Cyl 5.3L 325 5328
PRW
2008 Chevrolet Impala Automatic Transmission Flexplate 8 Cyl 5.3L PRW - Flexplate

P311-4A8AA99    1834614  New

Qty:
In Stock & Ready to Ship
$147.96
  • Platinum Series; SFI Spec 29.1; 168 Teeth; Internal Balance; Will Fit Specialty 6 Bolt 350 Turbo/400 Convertors w/Adapter; High Integrity Quick-RPM Design; Steel GM 3 x 10.5 in.~GM 3 x 10.75 in.~GM 6 x 11 in.~GM 6 x 11.5 in.
  • Flexplate; Platinum Series; SFI Spec 29.1; 168 Teeth; Internal Balance; Will Fit Specialty 6 Bolt 350 Turbo/400 Convertors w/Adapter; High Integrity Quick-RPM Design; Steel;
  • Flexplate
  • Features:
    • Gold Series
    • SFI 29.1 Certified
    • Direct Bolt On Component
    • Forged One Piece Steel Ring Gears
    • 0.03 Thicker Than Stock Flexplates
    • Constructed From Cold Rolled Chromoly Steel
    • Long Lasting Gold Irradiate Finish That Helps Prevent Rust
    • Double Welded Ring Gears For Added Durability
  • PRW Gold Series flex plates raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These Gold Series Flex plates are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. The 4mm thick center plate provides a solid foundation for these new designs. Ring gears are precision welded to meet SFI specifications, utilizing robotic machinery and cold-welding process. PRW flex plates are engineered for excellence and are rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.
Brand: PRW
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2008 - Chevrolet Impala SS V 8 Cyl 5.3L 325 5328
ATP
2008 Chevrolet Impala Automatic Transmission Flexplate 6 Cyl 3.5L ATP

P311-2169846    Z-613  New

12579453 , FRA-575 , Z-613

Qty:
In Stock & Ready to Ship
$145.87
ATP Automatic Transmission Flexplate
  • ATP Automatic Transmission Flex Plate
  • Teeth: 142 Outer Diameter: 11.91"
  • Product Attributes:
    • LineCode: Atp4
    • Tooth Quantity: 142
  • Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Brand: ATP
Additional Fitment Information:
Vehicle Drive Type Block Engine CID CC
2008 - Chevrolet Impala FWD V 6 Cyl 3.5L 213 3490

Showing 1 - 10 of 38 Products for Automatic Transmission Flexplate.