2007 Pontiac Grand Prix Rack and Pinion Assembly Steering - ACDelco, Accudrive Racks, BBB Industries, Cardone

2007 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.8L Cardone - New Rack and Pinion [Complete Unit]

Part # P311-0E2EE60 Manu # 97-1003 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 88964318 , 26081812 , 26079918 , 88964319 , 19207776 , 88955444 , 26079917 , 88965490 , 26079929 , 26081813 , 88955439 , 19207778

Qty:

Best Price: 329.50

New Hydraulic Power Rack and Pinion Complete Unit
with Non-Variable Effort Steering (N40) Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
New Rack and Pinion [Complete Unit]
Product Attributes:
- Features and Benefits:
  - 100% Performance Testing To Ensure Perfect Fit, Function And Reliable Performance
  - Built To Meet Or Exceed O.e.m. Performance
  - Computerized Spool Valve Balancing Ensures Exceptional Steering Feel
  - Environmentally-friendly Coating Applied To Tie Rods And Lines To Provide A Clean Appearance And Prevent Rust
  - Supplied With O.e.m. Grade Seals, O-rings And Boots To Provide Optimal Sealing Performance And Longevity
CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed Original Equipment Manufacturer performance. CSE Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are 100% tested to ensure reliable, long-lasting performance.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
2007 - Pontiac Grand Prix	V	6 Cyl 3.8L	231	3800

2007 Pontiac Grand Prix Rack and Pinion Assembly 8 Cyl 5.3L Cardone - Reman. Rack & Pinon [Complete Unit]

Part # P311-0D99F91 Manu # 22-182 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 88964316 , 88964317 , 88955437 , 26063582 , 26031078 , 26079916 , 88955443 , 88955438

Qty:

Core Price: $79.20 Best Price: 160.78

Remanufactured Hydraulic Power Rack and Pinion Complete Unit
Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Reman. Rack & Pinon [Complete Unit]
Product Attributes:
- FAQs:
  - For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
  - I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
  - Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
  - The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
  - The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
  - This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
- Features and Benefits:
  - 100% Hydraulic Testing For Proper Flow, Leakage And Performance Ensures Perfect Fit And Function (where Applicable).
  - 100% New O.e.- Style O-rings And Lip Seals Ensure Leak-free And Long-lasting Performance (where Applicable)
  - 100% Performance Testing To Ensure Perfect Fit, Function And Reliable Performance.
  - All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Protective Coating Applied To Each Unit To Extend The Life Of The Unit (where Applicable).
  - Racks Are Surfaced To Precise Specifications To Prevent Leaking Between Chambers And Extend Unit Life.
  - Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
2007 - Pontiac Grand Prix	V	8 Cyl 5.3L	325	5328

2007 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.8L Cardone - Reman. Rack & Pinon [Complete Unit]

Part # P311-0D99F91 Manu # 22-182 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 88964316 , 88964317 , 88955437 , 26063582 , 26031078 , 26079916 , 88955443 , 88955438

Qty:

Core Price: $79.20 Best Price: 160.78

Remanufactured Hydraulic Power Rack and Pinion Complete Unit
with Magnetic Speed Variable Assist Steering (NV8) Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Reman. Rack & Pinon [Complete Unit]
Product Attributes:
- FAQs:
  - For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
  - I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
  - Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
  - The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
  - The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
  - This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
- Features and Benefits:
  - 100% Hydraulic Testing For Proper Flow, Leakage And Performance Ensures Perfect Fit And Function (where Applicable).
  - 100% New O.e.- Style O-rings And Lip Seals Ensure Leak-free And Long-lasting Performance (where Applicable)
  - 100% Performance Testing To Ensure Perfect Fit, Function And Reliable Performance.
  - All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Protective Coating Applied To Each Unit To Extend The Life Of The Unit (where Applicable).
  - Racks Are Surfaced To Precise Specifications To Prevent Leaking Between Chambers And Extend Unit Life.
  - Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
2007 - Pontiac Grand Prix	V	6 Cyl 3.8L	231	3800

2007 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.8L Cardone - Reman. Rack & Pinon [Complete Unit]

Part # P311-0956262 Manu # 22-1003 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 88955439 , 88964318 , 26079929 , 19330464 , 26079917 , 19207778 , 19207776 , 26079918 , 88965490 , 88955444 , 88964319 , TR26021769

Qty:

Core Price: $31.50 Best Price: 194.20

Remanufactured Hydraulic Power Rack and Pinion Complete Unit
with Non-Variable Effort Steering (N40) Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Reman. Rack & Pinon [Complete Unit]
Product Attributes:
- FAQs:
  - For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
  - I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
  - Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
  - The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
  - The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
  - This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
- Features and Benefits:
  - 100% Hydraulic Testing For Proper Flow, Leakage And Performance Ensures Perfect Fit And Function (where Applicable).
  - 100% New O.e.- Style O-rings And Lip Seals Ensure Leak-free And Long-lasting Performance (where Applicable)
  - 100% Performance Testing To Ensure Perfect Fit, Function And Reliable Performance.
  - All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Protective Coating Applied To Each Unit To Extend The Life Of The Unit (where Applicable).
  - Racks Are Surfaced To Precise Specifications To Prevent Leaking Between Chambers And Extend Unit Life.
  - Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
2007 - Pontiac Grand Prix	V	6 Cyl 3.8L	231	3800

2007 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.8L Cardone - Reman. Rack & Pinon [Complete Unit]

Part # P311-0D99F91 Manu # 22-182 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 88964316 , 88964317 , 88955437 , 26063582 , 26031078 , 26079916 , 88955443 , 88955438

Qty:

Core Price: $79.20 Best Price: 160.78

Remanufactured Hydraulic Power Rack and Pinion Complete Unit
with Variable Effort Steering (NV7) Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Reman. Rack & Pinon [Complete Unit]
Product Attributes:
- FAQs:
  - For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
  - I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
  - Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
  - The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
  - The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
  - This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
- Features and Benefits:
  - 100% Hydraulic Testing For Proper Flow, Leakage And Performance Ensures Perfect Fit And Function (where Applicable).
  - 100% New O.e.- Style O-rings And Lip Seals Ensure Leak-free And Long-lasting Performance (where Applicable)
  - 100% Performance Testing To Ensure Perfect Fit, Function And Reliable Performance.
  - All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Protective Coating Applied To Each Unit To Extend The Life Of The Unit (where Applicable).
  - Racks Are Surfaced To Precise Specifications To Prevent Leaking Between Chambers And Extend Unit Life.
  - Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
2007 - Pontiac Grand Prix	V	6 Cyl 3.8L	231	3800

2007 Pontiac Grand Prix Rack and Pinion Assembly Accudrive Racks

Part # P311-1AC996C Manu # 3524 Condition: New

Qty:

Core Price: $50.00 Best Price: 156.71

; w/o Magnasteer Power Rack

Brand: Accudrive Racks

Vehicle
2007 - Pontiac Grand Prix

2007 Pontiac Grand Prix Rack and Pinion Assembly ACDelco - Long Rack

Part # P311-02F348B Manu # W0133-2060342 Condition: New

Qty:

Core Price: $110.00 Best Price: 1,010.48

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Genuine GM Remanufactured
; Excluding Magnetic Speed Variable Steering
Long Rack

Brand: ACDelco

Vehicle	Submodel
2007 - Pontiac Grand Prix	GT

2007 Pontiac Grand Prix Rack and Pinion Assembly ACDelco - Long Rack

Part # P311-02F348B Manu # W0133-2060342 Condition: New

Qty:

Core Price: $110.00 Best Price: 1,010.48

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Genuine GM Remanufactured
; with Variable Power Steering (RPO L32, NV7)
Long Rack

Brand: ACDelco

Vehicle	Submodel
2007 - Pontiac Grand Prix	GT

2007 Pontiac Grand Prix Rack and Pinion Assembly ACDelco - Long Rack

Part # P311-2D73434 Manu # W0133-2057440 Condition: New

Qty:

Core Price: $110.00 Best Price: 900.01

Professional Remanufactured
Long Rack

Brand: ACDelco

Vehicle	Submodel
2007 - Pontiac Grand Prix	Base

2007 Pontiac Grand Prix Rack and Pinion Assembly ACDelco - Long Rack

Part # P311-2D73434 Manu # W0133-2057440 Condition: New

Qty:

Core Price: $110.00 Best Price: 900.01

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Genuine GM Remanufactured
Long Rack

Brand: ACDelco

Vehicle	Submodel
2007 - Pontiac Grand Prix	Base

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2007 Pontiac Grand Prix Rack and Pinion Assembly