Finish Selecting Your Vehicle

Choose your Engine for your 2007 Nissan Maxima

  • 6 Cyl 3.5L

Shop By Brand

The Following brands are available based on your search.

  • ATP
    ATP
  • Dorman
    Dorman
  • Hooker
    Hooker

Showing Products For 2007 Nissan Maxima Exhaust Manifold

Below are all the different brands and applications for 2007 Nissan Maxima Exhaust Manifold

Showing 1 - 10 of 14 Products for Exhaust Manifold.

Refine Your Search

Dorman
2007 Nissan Maxima Exhaust Manifold - Left Dorman

P311-4B2386E    W0133-1767295  New

Qty:
In Stock & Ready to Ship
$378.81
Dorman Exhaust Manifold  Left
  • Radiator Side
  • The Dorman manifold also includes the heat shield and necessary gaskets and hardware. These items are serviced separately from the OE manifold.
  • Front
Brand: Dorman
Position: Left
Additional Fitment Information:
Vehicle Position
2007 - Nissan Maxima Left
ATP
2007 Nissan Maxima Exhaust Manifold - Rear 6 Cyl 3.5L ATP

P311-24FF6E5    101481  New

101481 , 140047Y000 , 14004CA000

Qty:
In Stock & Ready to Ship
$285.27
ATP Exhaust Manifold  Rear
  • ATP Exhaust Manifold
  • excludes EGR tube port
  • Product Attributes:
    • Bolt Hole Quantity: 6
    • CARB Compliant: Yes
    • Exhaust Manifold Position: Rear
    • Flange Bolt Hole Quantity: 2
    • Flange Stud Hole Quantity: 3
    • Heat Shield Included: Yes
    • Includes in Box: Exhaust Manifold - 1 Manifold Gasket And 1 Flange - 2 Studs - 2 Nuts - 3 Bolts
    • Inlet Port Shape: Oval
    • LineCode: Atp2
  • ATP exhaust manifolds transport burnt exhaust gasses from the engine to the exhaust system. Over time exhaust manifolds can crack or warp releasing hot exhaust gas into the engine compartment. These gases can find their way into the passenger cabin creating a dangerous situation. The best way to repair the broken manifold is to replace it with a new one. ATP Exhaust manifolds are designed to fit and function like the original part restoring the exhaust system by eliminating the dangerous leaks.
Brand: ATP
Position: Rear
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2007 - Nissan Maxima Rear V 6 Cyl 3.5L - 3498
ATP
2007 Nissan Maxima Exhaust Manifold - Front 6 Cyl 3.5L ATP

P311-277FCED    101480  New

101480 , 140067Y000 , 140068J100

Qty:
In Stock & Ready to Ship
$752.51
ATP Exhaust Manifold  Front
  • ATP Exhaust Manifold
  • Product Attributes:
    • Bolt Hole Quantity: 6
    • CARB Compliant: Yes
    • Exhaust Manifold Position: Driver Side
    • Flange Bolt Hole Quantity: None
    • Flange Stud Hole Quantity: 3
    • Heat Shield Included: Yes
    • Includes in Box: Exhaust Manifold - 1 Manifold Gasket And 1 Flange - 3 Studs - 3 Nuts
    • Inlet Port Shape: Oval
    • LineCode: Atp2
  • ATP exhaust manifolds transport burnt exhaust gasses from the engine to the exhaust system. Over time exhaust manifolds can crack or warp releasing hot exhaust gas into the engine compartment. These gases can find their way into the passenger cabin creating a dangerous situation. The best way to repair the broken manifold is to replace it with a new one. ATP Exhaust manifolds are designed to fit and function like the original part restoring the exhaust system by eliminating the dangerous leaks.
Brand: ATP
Position: Front
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2007 - Nissan Maxima Front V 6 Cyl 3.5L - 3498
Dorman
2007 Nissan Maxima Exhaust Manifold - Front Dorman

P311-50B2D47    674-934  New

101480 , 140067Y000 , 140068J100

Qty:
In Stock & Ready to Ship
$251.30
Dorman Exhaust Manifold  Front
  • Exhaust Manifold Kit - Includes Required Gaskets And Hardware
  • Product Attributes:
    • Grade Type: Regular
    • Heat Shield Included: Yes
    • Mounting Hardware Included: Yes
    • Package Contents: Exhaust Manifold; 1 Manifold Gasket And 1 Flange; 3 Studs; 3 Nuts
    • Port Shape: Oval
  • Features:
    • Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
    • Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
    • Complete repair - includes all necessary gaskets and downpipe hardware
    • Trustworthy design - built by industry leader in aftermarket manifolds
  • This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Brand: Dorman
Position: Front
Additional Fitment Information:
Vehicle Position
2007 - Nissan Maxima Front
Dorman
2007 Nissan Maxima Exhaust Manifold - Rear Dorman

P311-2E636BD    674-935  New

101481 , 140047Y000 , 14004CA000 , 663430

Qty:
In Stock & Ready to Ship
$238.48
Dorman Exhaust Manifold  Rear
  • Exhaust Manifold Kit - Includes Required Gaskets And Hardware
  • Product Attributes:
    • Grade Type: Regular
    • Heat Shield Included: Yes
    • Mounting Hardware Included: Yes
    • Package Contents: Exhaust Manifold; 1 Manifold Gasket And 1 Flange; 2 Studs; 2 Nuts; 3 Bolts
    • Port Shape: Oval
  • Features:
    • Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
    • Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
    • Complete repair - includes all necessary gaskets and downpipe hardware
    • Trustworthy design - built by industry leader in aftermarket manifolds
  • This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Brand: Dorman
Position: Rear
Additional Fitment Information:
Vehicle Position
2007 - Nissan Maxima Rear
Hooker
Exhaust Manifold Hooker

P311-4340557    8502-3HKR  New

Qty:
In Stock & Ready to Ship
$659.22
Hooker Exhaust Manifold
  • Hooker Exhaust Manifolds
  • Hooker Exhaust Manifolds; For Use w/LS Swap; 1.625 in. Tubing; 2.5 in. Collector; Hi-Silicon-Moly Ductile Iron; Includes Hardware; Black Ceramic Finish;
  • Product Attributes:
    • Collector Diameter: 2.500 In.
    • Head Style: Manifold
    • Primary Tube Diameter: 1.625 In.
    • Tube Material: Cast Iron
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Durable/Quiet Operation
    • Leak-Free Sealing
    • Corrosion Resistant
    • Tight Tuck Design For Universal Fit/Traditional Muscle Car Look
  • These Hooker BlackHeart cast iron exhaust manifolds have a 2.50 inch outlet, black ceramic finish and are designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly toward the exit port for improved flow. Being cast iron means they will provide years of leak-free performance with less under hood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Exhaust Manifold Hooker

P311-2135789    8502HKR  New

Qty:
In Stock & Ready to Ship
$521.23
Hooker Exhaust Manifold
  • Hooker Exhaust Manifolds
  • Hooker Exhaust Manifolds; For Use w/LS Swap; 1.625 in. Tubing; 2.5 in. Collector; Hi-Silicon-Moly Ductile Iron; Includes Hardware; Natural Cast Finish;
  • Product Attributes:
    • Collector Diameter: 2.500 In.
    • Head Style: Manifold
    • Primary Tube Diameter: 1.625 In.
    • Tube Material: Cast Iron
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Durable/Quiet Operation
    • Leak-Free Sealing
    • Corrosion Resistant
    • Tight Tuck Design For Universal Fit/Traditional Muscle Car Look
  • These Hooker BlackHeart cast iron exhaust manifolds have a 2.50 inch outlet, natural cast finish and are designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly toward the exit port for improved flow. Being cast iron means they will provide years of leak-free performance with less under hood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Exhaust Manifold Hooker

P311-3B66835    8502-1HKR  New

Qty:
In Stock & Ready to Ship
$688.51
Hooker Exhaust Manifold
  • Hooker Exhaust Manifolds
  • Hooker Exhaust Manifolds; For Use w/LS Swap; 1.625 in. Tubing; 2.5 in. Collector; Hi-Silicon-Moly Ductile Iron; Includes Hardware; Silver Ceramic Finish;
  • Product Attributes:
    • Collector Diameter: 2.500 In.
    • Head Style: Manifold
    • Primary Tube Diameter: 1.625 In.
    • Tube Material: Cast Iron
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Durable/Quiet Operation
    • Leak-Free Sealing
    • Corrosion Resistant
    • Tight Tuck Design For Universal Fit/Traditional Muscle Car Look
  • These Hooker BlackHeart cast iron exhaust manifolds have a 2.50 inch outlet, silver ceramic finish and are designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly toward the exit port for improved flow. Being cast iron means they will provide years of leak-free performance with less under hood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Exhaust Manifold Hooker

P311-4F90D21    BHS595  New

Qty:
In Stock & Ready to Ship
$542.22
Hooker Exhaust Manifold
  • Hooker Exhaust Manifolds
  • Hooker Exhaust Manifolds; Fits w/1982-04 GM S10/Sonoma w/LS Engine Swap; 2.5 in. Outlet; 304 Stainless Steel; Titanium Ceramic Cast Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Eliminate The Installation Guesswork And Fitment Compatibility Issues
    • 306 Stainless Steel MLS Collector Gaskets And Mating Flange Hardware Included
    • Cast From Hi-Silicon-Moly Ductile Iron To Provide Durability And Corrosion Resistance
    • 2.5-inch Outlet Diameter Offers Improved Flow for Maximum Performance
  • These Hooker BlackHeart cast iron exhaust manifolds are designed for 1982-2004 GM S10/Sonoma trucks with LS engines. They feature 2.5-inch outlets and are designed to be used with Hooker BlackHeart Engine Mounts (P/N 71221029HKR) and Transmission Crossmembers (P/N 71222020HKR, 71222018HKR, or 71222019HKR) for a trouble-free LS engine swap. Choose from three colors of ceramic finish (i.e., black, silver, or titanium). The ceramic finish reduces underhood temperature and provides improved corrosion protection.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Exhaust Manifold Hooker

P311-1CBECBF    BHS594  New

Qty:
In Stock & Ready to Ship
$567.80
Hooker Exhaust Manifold
  • Hooker Exhaust Manifolds
  • Hooker Exhaust Manifolds; Fits w/1982-04 GM S10/Sonoma w/LS Engine Swap; 2.5 in. Outlet; 304 Stainless Steel; Silver Cast Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Eliminate The Installation Guesswork And Fitment Compatibility Issues
    • 305 Stainless Steel MLS Collector Gaskets And Mating Flange Hardware Included
    • Cast From Hi-Silicon-Moly Ductile Iron To Provide Durability And Corrosion Resistance
    • 2.5-inch Outlet Diameter Offers Improved Flow for Maximum Performance
  • These Hooker BlackHeart cast iron exhaust manifolds are designed for 1982-2004 GM S10/Sonoma trucks with LS engines. They feature 2.5-inch outlets and are designed to be used with Hooker BlackHeart Engine Mounts (P/N 71221029HKR) and Transmission Crossmembers (P/N 71222020HKR, 71222018HKR, or 71222019HKR) for a trouble-free LS engine swap. Choose from three colors of ceramic finish (i.e., black, silver, or titanium). The ceramic finish reduces underhood temperature and provides improved corrosion protection.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 14 Products for Exhaust Manifold.