Shop By Brand

The Following brands are available based on your search.

  • Autopart International
    Autopart International
  • BBB Industries
    BBB Industries
  • CARQUEST
    CARQUEST
  • Cardone
    Cardone
  • Centric
    Centric
  • Dynamic Friction
    Dynamic Friction
  • Mando
    Mando
  • Raybestos
    Raybestos
  • WBR
    WBR

Showing Products For 2007 Nissan Armada Disc Brake Caliper

Below are all the different brands and applications for 2007 Nissan Armada Disc Brake Caliper

Showing 1 - 10 of 43 Products for Disc Brake Caliper.

Refine Your Search

Cardone
2007 Nissan Armada Disc Brake Caliper - Rear Left Cardone - Unloaded Caliper

P311-1EA8A73    19-2948  Remanufactured

440117S000

Qty:
In Stock & Ready to Ship
$45.90 $44.82
Cardone Disc Brake Caliper  Rear Left
  • with Phenolic Piston Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Size (OD) (mm): 48.0822
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Rear Left
Cardone
2007 Nissan Armada Disc Brake Caliper - Rear Right Cardone - Unloaded Caliper

P311-434CCE5    19-2949  Remanufactured

440017S000

Qty:
In Stock & Ready to Ship
$45.90 $44.82
Cardone Disc Brake Caliper  Rear Right
  • with Phenolic Piston Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Size (OD) (mm): 48.0822
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Rear Right
Centric
2007 Nissan Armada Disc Brake Caliper - Rear Right Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-1CDFAB1    141.42565  Remanufactured

Qty:
In Stock & Ready to Ship
$75.00 $47.18
Centric Disc Brake Caliper  Rear Right
  • Centric Semi-Loaded Brake Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bracket Included: No
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): No
    • Bracket Required Y/N: No
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.10410
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: No
    • Pads Included: No
    • Piston 1 Diameter: 48.000
    • Piston 2 Diameter: 48.000
    • Piston Material: Phenolic
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Rear Right
Centric
2007 Nissan Armada Disc Brake Caliper - Rear Left Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-0DE6480    141.42566  Remanufactured

Qty:
In Stock & Ready to Ship
$75.00 $47.18
Centric Disc Brake Caliper  Rear Left
  • Centric Semi-Loaded Brake Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bracket Included: No
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): No
    • Bracket Required Y/N: No
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.10410
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: No
    • Pads Included: No
    • Piston 1 Diameter: 48.000
    • Piston 2 Diameter: 48.000
    • Piston Material: Phenolic
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Left
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Rear Left
Centric
2007 Nissan Armada Disc Brake Caliper - Front Left Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-20A19FB    141.42146  Remanufactured

Qty:
In Stock & Ready to Ship
$75.00 $55.84
Centric Disc Brake Caliper  Front Left
  • Centric Semi-Loaded Brake Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bore Size mm: 50.8
    • Bore Size(s) millimeters: 50.8
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.12860
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 50.800
    • Piston 2 Diameter: 50.800
    • Piston Material: Phenolic
    • Piston Quantity: 2
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Left
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Front Left
Centric
2007 Nissan Armada Disc Brake Caliper - Front Right Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-5494140    141.42145  Remanufactured

Qty:
In Stock & Ready to Ship
$75.00 $55.84
Centric Disc Brake Caliper  Front Right
  • Centric Semi-Loaded Brake Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bore Size mm: 50.8
    • Bore Size(s) millimeters: 50.8
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.12860
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 50.800
    • Piston 2 Diameter: 50.800
    • Piston Material: Phenolic
    • Piston Quantity: 2
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Right
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Front Right
Cardone
2007 Nissan Armada Disc Brake Caliper - Front Right Cardone - Unloaded Caliper w/Bracket

P311-0311544    19-B3338  Remanufactured

41001ZC60B

Qty:
In Stock & Ready to Ship
$58.50 $56.17
Cardone Disc Brake Caliper  Front Right
  • with Phenolic Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Quantity: 2
    • Piston Size (OD) (mm): 50.7238
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Front Right
Cardone
2007 Nissan Armada Disc Brake Caliper - Front Left Cardone - Unloaded Caliper w/Bracket

P311-555BC1C    19-B3339  Remanufactured

41011ZC60B

Qty:
In Stock & Ready to Ship
$58.50 $56.17
Cardone Disc Brake Caliper  Front Left
  • with Phenolic Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Quantity: 2
    • Piston Size (OD) (mm): 50.7238
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Front Left
Cardone
2007 Nissan Armada Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-2884129    19-3338  Remanufactured

41001ZC60A , 41001ZC60B

Qty:
In Stock & Ready to Ship
$58.50 $63.56
Cardone Disc Brake Caliper  Front Right
  • with Phenolic Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Quantity: 2
    • Piston Size (OD) (mm): 50.7238
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Front Right
Centric
2007 Nissan Armada Disc Brake Caliper - Front Left Centric - Centric Premium Posi-Quiet Loaded Disc Brake Calipers

P311-302AF9B    142.42146  Remanufactured

Qty:
In Stock & Ready to Ship
$75.00 $53.96
Centric Disc Brake Caliper  Front Left
  • Posi Quiet Loaded Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish.
  • Centric Premium Posi-Quiet Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Bleeder Thread Diameter: 10.000
    • Friction Materials Standards Institute Pad Number: 10x.12860
    • Grade Type: Regular
    • Inlet Thread Diameter: 10.000
    • Pads Included: Yes
    • Piston 1 Diameter: 50.800
    • Piston 2 Diameter: 50.800
    • Piston Material: Phenolic
    • Piston Quantity: 2
    • Prop 65 [cntrc]: California Proposition 65
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Left
Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Front Left

Showing 1 - 10 of 43 Products for Disc Brake Caliper.