Finish Selecting Your Vehicle

Choose your Submodel for your 2007 Mercedes-Benz C280

  • 4Matic

Shop By Brand

The Following brands are available based on your search.

  • BBR Automotive
    BBR Automotive
  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Hella
    Hella
  • Holley
    Holley
  • Pierburg
    Pierburg
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 2007 Mercedes-Benz C280 Engine Intake Manifold

Below are all the different brands and applications for 2007 Mercedes-Benz C280 Engine Intake Manifold

Showing 1 - 10 of 151 Products for Engine Intake Manifold.

Refine Your Search

Pierburg
2007 Mercedes-Benz C280 Engine Intake Manifold Pierburg

P311-5A87974    W0133-2884259  New

Qty:
In Stock & Ready to Ship
$869.46
Pierburg Engine Intake Manifold
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Pierburg
Additional Fitment Information:
Vehicle
2007 - Mercedes-Benz C280
BBR Automotive
2007 Mercedes-Benz C280 Engine Intake Manifold BBR Automotive

P311-53E62C3    W0133-2884259  New

Qty:
In Stock & Ready to Ship
$831.31
BBR Automotive Engine Intake Manifold
  • Intake Manifold is not tapped for threads where the Throttle Actuator is mounted. Use (4) 000 990 30 11 Screws.
Brand: BBR Automotive
Additional Fitment Information:
Vehicle
2007 - Mercedes-Benz C280
Hella
2007 Mercedes-Benz C280 Engine Intake Manifold 6 Cyl 3.0L Hella - Pierburg - OEM Part

P311-52427A0    7.00246.33.0  New

Qty:
In Stock & Ready to Ship
$766.65
  • INTAKE MANIFOLD MERCEDES
  • with OE No. A2721402101, A2721402201, A2721402401 OE Quality
  • INTAKE MANIFOLD MERCEDES
  • Pierburg - OEM Part
  • INTAKE MANIFOLD MERCEDES
Brand: Hella
Additional Fitment Information:
Vehicle Manuf. Body Code Block Engine CID CC
2007 - Mercedes-Benz C280 203.054 V 6 Cyl 3.0L - 2996
Hella
2007 Mercedes-Benz C280 Engine Intake Manifold 6 Cyl 3.0L Hella - Pierburg - OEM Part

P311-52427A0    7.00246.33.0  New

10 94 8381 , 272 140 21 01 , 272 140 22 01 , 272 140 24 01 , 2721402101 , 2721402201 , 2721402401 , 48381 , 89411 , A2721402101 , A2721402201 , A2721402401

Qty:
In Stock & Ready to Ship
$766.65
  • INTAKE MANIFOLD MERCEDES
  • OE Quality
  • INTAKE MANIFOLD MERCEDES
  • Pierburg - OEM Part
  • INTAKE MANIFOLD MERCEDES
Brand: Hella
Additional Fitment Information:
Vehicle Engine Designation Block Engine CID CC
2007 - Mercedes-Benz C280 272.940 V 6 Cyl 3.0L - 2996
Hella
2007 Mercedes-Benz C280 Engine Intake Manifold 6 Cyl 3.0L Hella

P311-52427A0    7.00246.33.0  New

Qty:
In Stock & Ready to Ship
$766.65
  • INTAKE MANIFOLD MERCEDES
  • with OE No. A2721402101, A2721402201, A2721402401
  • INTAKE MANIFOLD MERCEDES
  • INTAKE MANIFOLD MERCEDES
Brand: Hella
Additional Fitment Information:
Vehicle Manuf. Body Code Block Engine CID CC
2007 - Mercedes-Benz C280 203.054 V 6 Cyl 3.0L - 2996
Weiand
Engine Intake Manifold Weiand

P311-2466FAB    7151WND  New

Qty:
In Stock & Ready to Ship
$719.53
Weiand Engine Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold; Lower; w/Rectangular Port Heads; Includes Rear Mounted Pop Off Plate; w/Boost Gauge Port; Satin Finish;
  • Product Attributes:
    • Blower Size:
      • 6-71
      • 8-71
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Big Block V8
    • Number of Carbs: None; For Fuel Injection
    • RPM Range: N/a
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Easier Installation
    • Satin Finish
  • 6-71/8-71 Chevy B/B 396-502

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Weiand
Additional Fitment Information:
Vehicle
FAST
Engine Intake Manifold FAST

P311-3C605F6    146303  New

Qty:
In Stock & Ready to Ship
$1,368.21
  • LSXHR 103mm Intake Manifold for Cathedral Port LS1, LS2 and LS6
  • FAST® is expanding their line of the industry’s first polymer tunnel ram-style intake manifold, ideal for generating maximum power in boosted and naturally aspirated GM Cathedral Port LS engines.
  • Product Attributes:
    • Aftermarket Fuel Rail Required: No
    • Basic Operating RPM Range: 5000-7500
    • Cylinder Head Configuration: Ls1 / Cathedral Port
    • EGR: No
    • Engine Block Style: Stock/ Oem Standard Deck
    • Injection Style: Multi-port
    • Injectors Included: No
    • Intake Section Included: Complete
    • Multi-Port Fuel Rails Included: Yes
    • Supplemental Bosses Cast-In: No
    • Supplemental Bosses Machined: Yes
    • Throttle Body Bore Size: 103mm
    • Throttle Body Included: No
  • The FAST LSXHR 103mm Intake Manifold is ideal for generating maximum power in boosted and naturally aspirated GM LS cathedral port engines. It ships with a set of “tall” removeable velocity stacks, however “medium” and “short” stack options can be purchased separately. This allows interchanging of the various runner lengths so racers can experiment with finding which combination makes the most power in their application. Its polymer construction is lightweight, very strong and virtually eliminates power-robbing heat soak that occurs with commonly available aluminum intake manifolds. The manifold has been optimized to make power from 5,000 to 7,500 RPM, with testing showing 20+ horsepower gains over competitor tunnel ram intake manifolds. The FAST LSXHR 103mm Intake Manifold is designed specifically with boosted applications in mind and is rated for up to 45psi of continuous boost pressure. The compound fuel injector angle aims the spray pattern for ideal atomization, resulting in maximum power production and superior drivability. Also included with the intake manifold are custom fuel rails and necessary hardware. A reversible top allows for forward- or firewall-facing throttle body installations. The intake manifold also features two nitrous nozzle bosses per runner for clean and easy direct port system installations. Additionally, its 103mm throttle body opening can be port matched up to 105mm.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-17F6609    2504  New

Qty:
In Stock & Ready to Ship
$626.60
Edelbrock Engine Intake Manifold
  • Marine Intake Manifold
  • MANIFOLD; 1955-86 SB CHEVY; PERFORMER RPM; Q-JET MARINE
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Oem
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Cast Aluminum
    • Broad Powerband
  • Edelbrock part #2504 Performer RPM Q-Jet marine intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. This Performer RPM Q-Jet intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-05DD53D    2604  New

Qty:
In Stock & Ready to Ship
$494.31
Edelbrock Engine Intake Manifold
  • Performer Series Air-Gap Intake Manifold
  • MANIFOLD; 1987-95 SB CHEVY 5.0L-5.7L; PERFORMER AIR GAP; Q-JET
  • Product Attributes:
    • Cylinder Head Type: Center Bolt (87-95)
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Based On Performer-Series With Unique Air Gap
    • Air Gap Causes Cool and Dense Mixture More Power
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • Fits Both Spread and Square Bore Carburetors
    • Ideal for Street Rods and Street Machines
  • Edelbrock part #2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads with canted center bolt holes small-block Chevys. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines. Fits spread-bore or square-bore carburetors. Will not fit under stock Corvette hood.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-3E75DDF    28001  New

Qty:
In Stock & Ready to Ship
$885.73
Edelbrock Engine Intake Manifold
  • Big Victor 2 Intake Manifold
  • MANIFOLD; BBC; BIG VICTOR 2; SPREAD PORT; 4500 FLANGE
  • Product Attributes:
    • Cylinder Head Type: Big Chief
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Number of Carbs: One
    • RPM Range: 3500-8500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For 3500 to 8500 RPM High-Performance Engines
    • For Large CID or High RPM Drag Racing Big Blocks
    • Use with Dart Big Chief Cylinder Heads
    • Require Port Matching and Can Use Oval Ports
    • Better Top End Horsepower and Consistency
    • Crisp Throttle Response off the Stop
    • Use for 9.8 in. Deck Height Engines
    • Use Appropriate 4500-Series Carburetor
  • Edelbrock part #28001 Big Victor 2 Spread-Port intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 151 Products for Engine Intake Manifold.