2007 Lexus GX470 Fuel Injector Air and Fuel Delivery - CARQUEST, Delphi, Edelbrock, FAST, GBR Fuel Injection, Holley, Original Equipment, Standard Ignition

2007 Lexus GX470 Fuel Injector Original Equipment - Denso

Part # P311-55C0393 Manu # W0133-1740644 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $193.11

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Denso

Brand: Original Equipment

Vehicle
2007 - Lexus GX470

2007 Lexus GX470 Fuel Injector 8 Cyl 4.7L GBR Fuel Injection - Reman Multi Port Fuel Injector

Part # P311-0C920E6 Manu # 842-12334 Condition: New

Qty:

In Stock & Ready to Ship

Core Price: $10.00 Best Price: $36.66

Always replace fuel filter when injector is replaced.
Reman Multi Port Fuel Injector
GB’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.

Brand: GBR Fuel Injection

Vehicle	Block	Engine	CID	CC
2007 - Lexus GX470	V	8 Cyl 4.7L	285	4663

2007 Lexus GX470 Fuel Injector 8 Cyl 4.7L Standard Ignition

Part # P311-2F62BCE Manu # FJ728 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 155-0457 , 158-1518 , 2-18891 , 23209-0F020 , 232090F020 , 2320950080 , 297-0020 , 4G1879 , 67310 , 800-1705N , 842-12334 , M1037 , MP-56024

Qty:

In Stock & Ready to Ship

Best Price: $158.04

Fuel Injector
New
Product Attributes:
- Fuel Injector Type: Mfi Injector
- Fuel Type: Gas
- New or Reman: New
- Notes: Inlet Filter Relocated Towards Injector Body
- O-Rings Included: Yes
- System Type: Top Feed
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
Stainless-steel calibration slide and spring assembly prevents corrosion within the fuel control body, which leads to an extended service life. Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel. High-temp VitonÂ® O-rings enable prolonged sealing of injector under extreme heat conditions. Fiber-optic yttrium aluminum garnet YAG laser welding and 100 million cycle testing ensure quality in every box.
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.

Brand: Standard Ignition

Vehicle	Block	Engine	CID	CC
2007 - Lexus GX470	V	8 Cyl 4.7L	285	4663

Fuel Injector Delphi

Part # P311-2FEE12F Manu # FJ10471 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 12575073 , 17114101 , 25176061

Qty:

In Stock & Ready to Ship

Best Price: $90.65

Fuel Injector
Product Attributes:
- Attachment Method: Clip
- Body Material: Metal And Plastic
- Connector Gender: Female
- Connector Shape: Rectangle
- Fuel Injection Type: Gas
- Fuel Type: Gas
- Mounting Hardware Included: No
- New or Reman'd: New
- O-Ring Quantity: 2
- Retainer Clips Included: Yes
- System Type: Light Duty Injector
- Terminal Quantity: 2
- Terminal Type: Blade
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Delphi

Vehicle

Fuel Injector Holley

Part # P311-27C76E0 Manu # 522-428 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $649.02

Universal Fuel Injector
Universal Fuel Injector; 42 lbs./hr.; High Impedance; Qty. 8;
Product Attributes:
- Body Length: 2.850 In.
- Body Type: Ev1
- Connector Series: Ev1 - Jetronic - (bosch Style)
- Flow Rate: 42 Lbs./hr.
- Fuel Rate: 42 Lbs./hr
- Impedance: High
- O-Ring to O-Ring: 2.415 In.
- WARNING CA Proposition 65: No
Features:
- Bosch/Ev1 Style Performance Injector
- High Impedance For Use With Saturated Drivers
- Tri-Cone Spray Pattern
Holley EFI Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible bounce at low pulse widths as commonly found in other injectors. They are available from 19 to 160 lb./hr. flow rates to accommodate a variety of vehicles. Holley EFI Fuel Injectors provide precision fuel delivery you can depend on.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injector Holley

Part # P311-1B6F718 Manu # 522-838 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $754.78

Universal Fuel Injector
Universal Fuel Injector; 83 lbs./hr.; Low Impedance; Qty. 8;
Product Attributes:
- Body Length: 2.850 In.
- Body Type: Ev1
- Connector Series: Ev1 - Jetronic - (bosch Style)
- Flow Rate: 83 Lbs./hr.
- Fuel Rate: 83 Lbs./hr
- Impedance: 2.2 Ohms
- O-Ring to O-Ring: 2.415 In.
- WARNING CA Proposition 65: No
Features:
- Bosch/Ev1 Style Performance Injector
- Low Impedance (2.2 Ohms) For Use With Peak And Hold Drivers
- Tri-Cone Spray Pattern
Holley EFI Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible bounce at low pulse widths as commonly found in other injectors. They are available from 19 to 160 lb./hr. flow rates to accommodate a variety of vehicles. Holley EFI Fuel Injectors provide precision fuel delivery you can depend on.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injector Holley

Part # P311-218A436 Manu # 522-128X Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $612.97

Terminator X Fuel Injector Set
Terminator X Fuel Injector Set; 120 lbs./hr.; High Impedance; Qty. 8;
Product Attributes:
- Fuel Rate: 120 Lbs./hr
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- High Impedance Injector
- USCAR Injector Connector
- Easy To Install
Terminator X High Impedance Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible bounce at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. (441 cc/m to 2310 cc/m) you are sure to find an injector that matches your non-emissions controlled application. These high quality fuel injectors can also be used with any ECU that utilize high impedance fuel injector drivers.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injector Holley

Part # P311-2A047EA Manu # 522-101X Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $79.77

Terminator X Fuel Injector
Terminator X Fuel Injector; 100 lbs./hr.; High Impedance; 1 Each;
Product Attributes:
- Fuel Rate: 100 Lbs./hr
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- High Impedance Injector
- USCAR Injector Connector
- Easy To Install
Terminator X High Impedance Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible bounce at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. (441 cc/m to 2310 cc/m) you are sure to find an injector that matches your non-emissions controlled application. These high quality fuel injectors can also be used with any ECU that utilize high impedance fuel injector drivers.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injector Holley

Part # P311-3553423 Manu # 522-768X Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $480.28

Terminator X Fuel Injector Set
Terminator X Fuel Injector Set; 76 lbs./hr.; High Impedance; Qty. 8;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- High Impedance Injector
- USCAR Injector Connector
- Easy To Install
Terminator X High Impedance Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible bounce at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. (441 cc/m to 2310 cc/m) you are sure to find an injector that matches your non-emissions controlled application. These high quality fuel injectors can also be used with any ECU that utilize high impedance fuel injector drivers.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injector Holley

Part # P311-0836653 Manu # 522-228XFM Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $947.73

Terminator X Flow Matched Fuel Injector Set
Terminator X Flow Matched Fuel Injector Set; 220 lbs./hr.; High Impedance; Qty. 8;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- PICO/EV6 Style Performance Injectors
- Dynamic Flow Matched Within 1 Percent
- High Impedance For Use With Saturated Drivers
- Flow From 42lb/hr To 120lb/hr For A Wide Array Of Applications
- 40mm O-ring To O-ring Length
- Compatible OEM LS Intake Manifold LSA/LS3/LS7/L76/L92/L98/L99/LS9
- Easy To Install
Terminator X Flow Matched High Impedance Fuel Injectors are dynamic flow matched within 1%, resulting in extremely precision and consistent injector characteristics. These injectors provide excellent linearity with no discernible bounce at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. (441 cc/m to 2310 cc/m) you are sure to find an injector that matches your non-emissions controlled application. These high quality fuel injectors can also be used with any ECU that utilize high impedance fuel injector drivers.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2007 Lexus GX470 Fuel Injector