Finish Selecting Your Vehicle

Choose your Engine for your 2007 Chevrolet Silverado 3500 HD

  • 8 Cyl 6.0L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • ATP
    ATP
  • B&M
    B&M
  • Genuine
    Genuine
  • Pioneer Cable
    Pioneer Cable
  • Quick Time
    Quick Time
  • TCI Automotive
    TCI Automotive

Showing Products For 2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate

Below are all the different brands and applications for 2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate

Showing 1 - 10 of 40 Products for Automatic Transmission Flexplate.

Refine Your Search

Genuine
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L Genuine

P311-0B7BCD7    W0133-2131256  New

Qty:
In Stock & Ready to Ship
$256.82
Genuine Automatic Transmission Flexplate
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Genuine
Additional Fitment Information:
Vehicle Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD V 8 Cyl 6.0L 364 5967
ACDelco
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L ACDelco

P311-2D575AF    W0133-2131256  New

Qty:
In Stock & Ready to Ship
$267.99
Brand: ACDelco
Additional Fitment Information:
Vehicle Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD V 8 Cyl 6.0L 364 5967
TCI Automotive
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L TCI Automotive

P311-5F5A322    399754  New

Qty:
In Stock & Ready to Ship
$441.65
  • Internal Balance.
  • This machined flexplate is for GM LS Series engines (4.8,5.3,5.7,6.0). SFI 29.1 approved and internally balanced. Features 11.1", Wide bolt circle. 168 Tooth Count.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Chevrolet Ls Flexplate; Wide Bolt Pattern; 168 Tooth Count; Internal Balance.
  • Aftermarket Chevrolet and Pontiac machined flywheels are .140" thick and built to handle even the toughest applications. Constructed from the same A514 Blanchard ground steel and neutral balanced with 168-tooth (Chevy) and 166-tooth (Pontiac) starter rings. These machined flywheels are designed for specific application engines. These machined flexplates are a "must have" for moderate to serious performance applications.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle Engine Designation Engine Version Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD - Vortec V 8 Cyl 6.0L 364 5967
TCI Automotive
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L TCI Automotive

P311-0C02B62    399753  New

Qty:
In Stock & Ready to Ship
$441.65
  • Internal Balance
  • This machined flexplate is for GM LS Series engines (4.8,5.3,5.7,6.0). SFI 29.1 approved and internally balanced. Features 11.1", small bolt circle. 168 Tooth Count.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Chevrolet Ls Flexplate; Small Bolt Pattern; 168 Tooth Count; Internal Balance
  • Aftermarket Chevrolet and Pontiac machined flywheels are .140" thick and built to handle even the toughest applications. Constructed from the same A514 Blanchard ground steel and neutral balanced with 168-tooth (Chevy) and 166-tooth (Pontiac) starter rings. These machined flywheels are designed for specific application engines. These machined flexplates are a "must have" for moderate to serious performance applications.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle Engine Designation Engine Version Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD - Vortec V 8 Cyl 6.0L 364 5967
TCI Automotive
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L TCI Automotive

P311-5F5A322    399754  New

Qty:
In Stock & Ready to Ship
$441.65
  • Internal Balance.
  • This machined flexplate is for GM LS Series engines (4.8,5.3,5.7,6.0). SFI 29.1 approved and internally balanced. Features 11.1", Wide bolt circle. 168 Tooth Count.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Chevrolet Ls Flexplate; Wide Bolt Pattern; 168 Tooth Count; Internal Balance.
  • Aftermarket Chevrolet and Pontiac machined flywheels are .140" thick and built to handle even the toughest applications. Constructed from the same A514 Blanchard ground steel and neutral balanced with 168-tooth (Chevy) and 166-tooth (Pontiac) starter rings. These machined flywheels are designed for specific application engines. These machined flexplates are a "must have" for moderate to serious performance applications.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle Engine Designation Engine Version Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD - Vortec V 8 Cyl 6.0L 364 5967
TCI Automotive
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L TCI Automotive

P311-0C02B62    399753  New

Qty:
In Stock & Ready to Ship
$441.65
  • Internal Balance
  • This machined flexplate is for GM LS Series engines (4.8,5.3,5.7,6.0). SFI 29.1 approved and internally balanced. Features 11.1", small bolt circle. 168 Tooth Count.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Chevrolet Ls Flexplate; Small Bolt Pattern; 168 Tooth Count; Internal Balance
  • Aftermarket Chevrolet and Pontiac machined flywheels are .140" thick and built to handle even the toughest applications. Constructed from the same A514 Blanchard ground steel and neutral balanced with 168-tooth (Chevy) and 166-tooth (Pontiac) starter rings. These machined flywheels are designed for specific application engines. These machined flexplates are a "must have" for moderate to serious performance applications.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle Engine Designation Engine Version Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD - Vortec V 8 Cyl 6.0L 364 5967
ATP
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L ATP

P311-3AA95EB    Z-498  New

Qty:
In Stock & Ready to Ship
$166.98
ATP Automatic Transmission Flexplate
  • ATP Automatic Transmission Flex Plate
  • Improved Heavy Duty; For Internally Balanced Engine Teeth: 168 Outer Diameter: 14.13" Bolt Circle Diameter: 11.25"
  • Product Attributes:
    • LineCode: Atp4
    • Pitch Flywheels: 12 To 14
    • Tooth Quantity: 168
    • Weight Added: N
  • Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Brand: ATP
Additional Fitment Information:
Vehicle Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD V 8 Cyl 6.0L 364 5967
ATP
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L ATP

P311-5EA8CC1    Z-269  New

Qty:
In Stock & Ready to Ship
$84.81
ATP Automatic Transmission Flexplate
  • ATP Automatic Transmission Flex Plate
  • Normal Duty Teeth: 168 Outer Diameter: 14.13" Bolt Circle Diameter: 11.25"
  • Product Attributes:
    • Inside Diameter: 2.0
    • LineCode: Atp4
    • Mounting Hole Diameter: 11.25
    • Pitch Flywheels: 12 To 14
    • Tooth Quantity: 168
    • Weight Added: N
  • Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Brand: ATP
Additional Fitment Information:
Vehicle Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD V 8 Cyl 6.0L 364 5967
ATP
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L ATP

P311-3AA95EB    Z-498  New

FRA-471HD , FRA471HD , Z-498

Qty:
In Stock & Ready to Ship
$166.98
ATP Automatic Transmission Flexplate
  • ATP Automatic Transmission Flex Plate
  • Description: Improved Heavy Duty; For Internally Balanced Engine Teeth: 168 Outer Diameter: 14.13" Bolt Circle Diameter: 11.25"
  • Product Attributes:
    • LineCode: Atp4
    • Pitch Flywheels: 12 To 14
    • Tooth Quantity: 168
    • Weight Added: N
  • Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Brand: ATP
Additional Fitment Information:
Vehicle Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD V 8 Cyl 6.0L 364 5967
ATP
2007 Chevrolet Silverado 3500 HD Automatic Transmission Flexplate 8 Cyl 6.0L ATP

P311-5EA8CC1    Z-269  New

12553054 , 12563136 , 12580709 , 12602448 , 12606620 , AA-G181 , AA-G186 , FRA-471 , FRA471 , GM181 , GM186 , V5011 , Z-269

Qty:
In Stock & Ready to Ship
$84.81
ATP Automatic Transmission Flexplate
  • ATP Automatic Transmission Flex Plate
  • Description: Normal Duty Teeth: 168 Outer Diameter: 14.13" Bolt Circle Diameter: 11.25"
  • Product Attributes:
    • Inside Diameter: 2.0
    • LineCode: Atp4
    • Mounting Hole Diameter: 11.25
    • Pitch Flywheels: 12 To 14
    • Tooth Quantity: 168
    • Weight Added: N
  • Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Brand: ATP
Additional Fitment Information:
Vehicle Block Engine CID CC
2007 - Chevrolet Silverado 3500 HD V 8 Cyl 6.0L 364 5967

Showing 1 - 10 of 40 Products for Automatic Transmission Flexplate.