802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Engine for your 2006 Kia Optima

  • 4 Cyl 2.4L
  • 6 Cyl 2.7L

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Mando
    Mando
  • Mapco
    Mapco

Showing Products For 2006 Kia Optima Power Steering Pump

Below are all the different brands and applications for 2006 Kia Optima Power Steering Pump

Showing 1 - 10 of 14 Products for Power Steering Pump.

Refine Your Search

Mando
2006 Kia Optima Power Steering Pump 4 Cyl 2.4L Mando

P311-0E34462    W0133-1917659  New

Qty:
$197.22
Mando Power Steering Pump
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • Production: 10/01/2005-
Brand: Mando
Additional Fitment Information:
Vehicle Block Engine CID CC Prod. Date Range
2006 - Kia Optima L 4 Cyl 2.4L - 2359 Fr:10-01-05
Mando
2006 Kia Optima Power Steering Pump 4 Cyl 2.4L Mando

P311-57288BE    W0133-1650089  New

Qty:
$172.31
Mando Power Steering Pump
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • Production: -09/30/2005
Brand: Mando
Additional Fitment Information:
Vehicle Block Engine CID CC Prod. Date Range
2006 - Kia Optima L 4 Cyl 2.4L - 2351 To:09-30-05
Mando
2006 Kia Optima Power Steering Pump 6 Cyl 2.7L Mando

P311-2A98CED    W0133-1650202  New

Qty:
$226.62
Mando Power Steering Pump
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • Production: -09/30/2005
Brand: Mando
Additional Fitment Information:
Vehicle Block Engine CID CC Prod. Date Range
2006 - Kia Optima V 6 Cyl 2.7L - 2656 To:09-30-05
BBB Industries
2006 Kia Optima Power Steering Pump 4 Cyl 2.4L BBB Industries - Reman Power Steering Pump

P311-485090A    990-0229  New

Qty:
$10.00 $61.42
BBB Industries Power Steering Pump
  • w/o Reservoir Old Body Style
  • Reman Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
2006 - Kia Optima 6 L 4 Cyl 2.4L - 2351
BBB Industries
2006 Kia Optima Power Steering Pump 6 Cyl 2.7L BBB Industries - Reman Power Steering Pump

P311-2937874    990-0779  New

Qty:
$30.00 $91.63
BBB Industries Power Steering Pump
  • w/o Reservoir New Body Style
  • Reman Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
2006 - Kia Optima 4 V 6 Cyl 2.7L - 2656
BBB Industries
2006 Kia Optima Power Steering Pump 6 Cyl 2.7L BBB Industries - Reman Power Steering Pump

P311-5A57493    990-0226  New

Qty:
$30.00 $74.51
BBB Industries Power Steering Pump
  • w/o Reservoir Old Body Style
  • Reman Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
2006 - Kia Optima 8 V 6 Cyl 2.7L - 2656
Cardone
2006 Kia Optima Power Steering Pump 4 Cyl 2.4L Cardone - Reman. A-1 CARDONE Power Steering Pump

P311-05349F6    21-5257  Remanufactured

5710038100

Qty:
$3.60 $60.92
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/o Reservoir
  • Inline filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system. Supplied w/o Reservoir
  • Reman. A-1 CARDONE Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% Tested Using Cardone Road Simulation Technology
      • All Critical Components (campacs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • Brush Assembly Tolerance Specs Validated Or Replaced With New Components, If Necessary
      • Every Pump Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise.
    • Power Steering Outlet Thread Size: M16 X 1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Spline
  • Electronic Hydraulic Power Steering Pumps provide better engine efficiency and performance over traditional power steering pumps. Rather than increasing the load on the engine to run the hydraulic system, the electric motor on EHPS units provides power to the system. By eliminating additional strain on the engine, EHPS units help to increase fuel efficiency and reduce CO2 emissions. CARDONE remanufactured Electronic Hydraulic Power Steering Pumps are a cost-effective, high-quality alternative to expensive O.E. replacement units.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
2006 - Kia Optima 6 L 4 Cyl 2.4L - 2351
Cardone
2006 Kia Optima Power Steering Pump 6 Cyl 2.7L Cardone - Reman. A-1 CARDONE Power Steering Pump

P311-27CE07C    21-5253  Remanufactured

5710026100 , 5710038500

Qty:
$13.50 $79.41
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/o Reservoir
  • Inline filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system. Supplied w/o Reservoir
  • Reman. A-1 CARDONE Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% Tested Using Cardone Road Simulation Technology
      • All Critical Components (campacs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • Brush Assembly Tolerance Specs Validated Or Replaced With New Components, If Necessary
      • Every Pump Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise.
    • Power Steering Outlet Thread Size: M16 X 1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Spline
  • Electronic Hydraulic Power Steering Pumps provide better engine efficiency and performance over traditional power steering pumps. Rather than increasing the load on the engine to run the hydraulic system, the electric motor on EHPS units provides power to the system. By eliminating additional strain on the engine, EHPS units help to increase fuel efficiency and reduce CO2 emissions. CARDONE remanufactured Electronic Hydraulic Power Steering Pumps are a cost-effective, high-quality alternative to expensive O.E. replacement units.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
2006 - Kia Optima 8 V 6 Cyl 2.7L - 2656
Cardone
2006 Kia Optima Power Steering Pump 4 Cyl 2.4L Cardone - Reman. A-1 CARDONE Power Steering Pump

P311-097E28B    21-148  Remanufactured

571002G000 , 571002G050

Qty:
$27.00 $67.56
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/o Reservoir
  • Inline filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system. Supplied w/o Reservoir
  • Reman. A-1 CARDONE Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% Tested Using Cardone Road Simulation Technology
      • All Critical Components (campacs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Electronic Components Functionally Tested And Replaced, Where Needed
      • Every Pump Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
    • Power Steering Outlet Thread Size: M16 X 1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
  • Electronic Hydraulic Power Steering Pumps provide better engine efficiency and performance over traditional power steering pumps. Rather than increasing the load on the engine to run the hydraulic system, the electric motor on EHPS units provides power to the system. By eliminating additional strain on the engine, EHPS units help to increase fuel efficiency and reduce CO2 emissions. CARDONE remanufactured Electronic Hydraulic Power Steering Pumps are a cost-effective, high-quality alternative to expensive O.E. replacement units.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
2006 - Kia Optima 3 L 4 Cyl 2.4L - 2359
Cardone
2006 Kia Optima Power Steering Pump 6 Cyl 2.7L Cardone - Reman. A-1 CARDONE Power Steering Pump

P311-0A042D5    21-203  Remanufactured

571002G100

Qty:
$27.00 $146.67
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/o Reservoir
  • Inline filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system. Supplied w/o Reservoir
  • Reman. A-1 CARDONE Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% New Armatures
      • All Critical Components (campacs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • Brush Assembly Tolerance Specs Validated Or Replaced With New Components, If Necessary
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Power Steering Outlet Thread Size: M16 X 1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Spline
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
2006 - Kia Optima 4 V 6 Cyl 2.7L - 2656

Showing 1 - 10 of 14 Products for Power Steering Pump.