2006 Chrysler Pacifica Ignition Coil Ignition - AEM Electronics, Autopart International, CARQUEST, Delphi, Edelbrock, Encore Automotive, FAST, Hitachi, Holley, MSD, Mopar, NGK, P

Ignition Coil MSD

Part # P311-56D99D3 Manu # 82803 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $130.43

Pro 600 Ignition High Output Coil
Pro 600 Ignition High Output Coil; Single; Black;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Eight Outputs Of Up To 680 Mj Of Energy
- 50 Kilovolts Output Voltage When Used With Msd Suggested Coils
- Spark Duration Of Greater Than 300 Microseconds
- 6 Volts Minimum Required For Starting And Running
- 12 Volts Minimum Required For 600 Mj Operation
- Maximum Operating Voltage 22V
- Direct Plugin To Holley Efi Systems
- Compatible With Most Efi Systems/Including 5V Or 12V Drivers
- Reverse Battery Protection
- Diagnostic Leds Help Troubleshoot Issues Should They Arise
- Fits Most Coil-Per-Plug Engines Up To Eight Cylinder
If youve made the step up to the industry-leading MSD Pro 600 Ignition, youll want to equip it with the best coils on the market. The Pro 600 (Capacitive Discharge Ignition) coil is the solution with the highest current and voltage available in a small compact design. When youre making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you are leaving horsepower on the table. To answer this need, MSD developed this powerful coil for the PRO 600 Capacitive Discharge Ignition to provide unrivaled spark energy and dependability. With the unrivaled output of the Pro 600 CDI, combined with these High-Output coils, everything from Pro Mod to Pulling Trucks can perform at a whole new level! This high output coil is meant to be used with MSDs Pro 600 CDI (PN 8000). The coil will be wired to the Pro 600 CDI harness.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Coil MSD

Part # P311-1680038 Manu # 82023 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $62.68

Blaster 2 Ignition Coil
Blaster 2 Ignition Coil; High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Black;
Product Attributes:
- Inductance: 8 Mh
- Maximum Voltage: 45000
- Peak Current: 140 Ma
- Primary Resistance: .700 Ohms
- Secondary Resistance: 4.5k Ohms
- Spark Duration: 350 Us
- Turns Ratio: 100:1
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Metal Canister Is Filled w/Premium Grade Oil For Cooling
- CARB E.O. Approved
- Available In Red And Black
Our famous red canister coil in black! Great choice with an MSD 6-series ignition. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister. The Blaster Coil is designed to mount in most factory canister coil mounts. MSD also offers a Chrome Coil Bracket, PN 8213. It is recommended to mount the PN 8202, PN 82023, and 8223 coils in an upright position. The High Vibration Coil, PN 8222, can be mounted in any position due to its epoxy potting compound.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Coil MSD

Part # P311-1B7A7B0 Manu # 82073 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $88.62

Blaster SS Ignition Coil
Blaster SS Ignition Coil; Compact Design; 6.9 mH Inductance; 300 mA Peak Current; 220 uS Spark Duration; 70:1 Turns Ratio; Black;
Product Attributes:
- Inductance: 6.9 Mh
- Item Weight: 1.080 Lbs.
- Peak Current: 300 Ma
- Primary Resistance: .355 Ohms
- Secondary Resistance: 4.4k Ohms
- Spark Duration: 220 Us
- Turns Ratio: 70:1
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Improved output coil for electronic ignitions and MSD Ignitions
- Efficient winding design and assembly creates a compact housing
- Primary and secondary windings are encased in Ciba polyurethane
- 70:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Dupont Rynite housing w/tall tower and brass primary terminals
- CARB E.O. Approved
Dont let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts!Note: If installing the Blaster SS Coil to a points distributor or a non-current limiting ignition system without an MSD Ignition, a 0.8 ohm ballast resistor is required (MSD PN 8214). The resistor should wire in series along with any factory resistors on the positive coil wire.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Coil MSD

Part # P311-05D3C7C Manu # 8261 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $355.23

HVC-II Ignition Coil
HVC-II Ignition Coil; Racing Coil For Use w/MSD 7 or 8 Series Ignition; 0.250 mH Inductance; 45000 Max Volts; 2 Amps Peak Current;150 uS Spark Duration; 70:1 Turns Ratio; Red;
Product Attributes:
- Inductance: .250 Mh
- Item Weight: 3.750 Lbs.
- Maximum Voltage: 45000
- Peak Current: 2 Ma
- Primary Resistance: .016 Ohms
- Secondary Resistance: 30 Ohms
- Spark Duration: 150 Us
- Turns Ratio: 70:1
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- For racing applications w/MSD 7 or 8 Series Ignition Control
- New U-core winding design produces more voltage and current
- 70:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Windings encased in fracture resistant compound for vibration
- Rynite housing w/isolated tower and brass primary terminals
- Supplied w/Rubber Shock Mounts
The HVC II Coil is completely built in-house so our engineers have exclusive control over their performance and quality. The Coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting edge winding material that has an improved insulation and is also capable of enduring extreme voltages. Together, these materials create a durable coil with incredible voltage capabilities, lightning quick rise time and lengthy spark duration.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Coil MSD

Part # P311-413D2A9 Manu # 86415 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $75.84

6EFI Ignition Coil
6EFI Ignition Coil; For Use w/6EFI Ignition PN[6415]/6-Series Ignition Modules; Black;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- High Spark Energy To Ensure The Air And Fuel In Your Engine
- Designed To Work With The MSD 6EFI Ignition PN[6415]
- Can Also Be Used With Other MSD 6-Series Ignition Boxes
- Black Housing And Laser-Etched Black Anodized Mounting Bracket
- Four Self-Tapping Screws Are Supplied For Mounting The Coil
- Plug-In Wiring Harness w/Wire Colors That Match The 6EFI Ignition
- Convert From A Female Socket To A Male High Energy Ignition
When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance with logos laser-etched on its black anodized aluminum mounting bracket. It is supplied with four, self-tapping mounting screws and a plug-in harness with color-coded wires for easy installation. The 6EFI coil produces high voltage and current that translate to powerful spark improving engine starting, throttle response, and power throughout the RPM range.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Coil MSD

Part # P311-176F6AC Manu # 82893-8 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $860.39

MSD Smart Coil
MSD Smart Coil; 8 Pack; 5.2 mH; 201 mJ; 0.55 Ohms; 69:1 Turns Ratio; 50000 Volts; Black;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Excellent Reliability
- Exceptional Value
- Available In Red And Black
The MSD Smart Coil is a direct replacement for the popular IGN-1A coil. Heres the difference; it produces more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. It is compatible with Holley EFI and many other aftermarket electronic fuel injection systems and will run on traditional 12 volt or 16 volt electrical systems found in race applications. Unique elongated mounting holes accommodate IGN-1A mounting brackets or allow it to bolt in place of an LS coil with 72mm bolt spacing. The MSD Smart Coil will bolt right on to Holley LS cast aluminum valve covers for a super clean look. Available in red or black, theres a set ready for your build.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Coil MSD

Part # P311-140F887 Manu # 82612 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $372.61

HVC-III Ignition Coil
HVC-III Ignition Coil; Racing Coil For Use w/MSD 7-8 Series Ignition; 0.250 mH Inductance; 45000 Max Volts; 2 Amps Peak Current; 150 uS Spark Duration; 70:1 Turns Ratio; Red;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Adjustable Output Energy Up To 680 Millijoules
- Compatible With 8/6/4 Cylinder Engines
- Spark Current Sense And Recording For Each Firing
- Spark Duration Of Greater Than 250 Microseconds
- Rated For Continuous Operation At An Output Of 600 mJ
- Operates Between 12- 28V
- Starting And Running Down To Six Volts
- Programmable Trigger Edge
- Reverse Battery Protection
- Internally Protected From Damage
- Diagnostic Led Detects The Presence Of Faults
- On-The-Fly Power Output Selection Wire
The HVC III Coil is completely built in-house so our engineers have exclusive control over their performance and quality. The Coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting-edge winding material that has improved insulation and is also capable of enduring extreme voltages. Together, these materials create a durable coil with incredible voltage capabilities, lightning-quick rise time, and longer spark duration. Equipped with an industry-first third terminal to allow secondary current sensing, for each spark, when used in conjunction with the MSD 8001 Pro 600 Single Channel ignition.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Coil Standard Ignition

Part # P311-0AD5658 Manu # DR-38M Condition: New

This Part Fits the Following OEM/Substitute Numbers: 18-5443 , 19161984 , 5C1456 , C988 , E950M , EBC1871 , IC699 , U531

Qty:

In Stock & Ready to Ship

Best Price: $88.93

Ignition Coil
Product Attributes:
- Attachment Method: Bolt On
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.
- Coil Included: Yes
- Coil Type: Electronic
- Connector Gender: Female
- Connector Shape: Oval, Rectangle
- Grease Pack: No
- Ignition Type: Electronic
- Instructions Included: No
- Mount Type: Bolt On
- Mounting Bracket(s) Included: Yes
- Mounting Location: Engine Bay
- Terminal Gender: Female
- Terminal Quantity: 2
- Terminal Type: Blade
100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown. Thermoplastic housing withstands heat stress for enhanced durability. External core made from oriented silicon steel ensures durability and longevity. Stainless steel spring resists corrosion. Tin-plated brass terminals improve electrical contact and protect against corrosion. High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Standard Ignition

Vehicle

Ignition Coil Standard Ignition

Part # P311-3F2724F Manu # S3-606 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 214-1D , 2141D , 52-2015 , 5C1335 , 88921438 , E108 , EBC1136 , IC1851 , IH800 , SE172 , U524

Qty:

In Stock & Ready to Ship

Best Price: $46.14

Ignition Coil
Product Attributes:
- Coil Included: Yes
- Coil Type: Electronic
- Connector Gender: No Connector
- Connector Shape: Wire Lead
- Contents: Ignition Coil
- Grease Pack: No
- Ignition Type: Electronic
- Instructions Included: No
- Mounting Bracket(s) Included: No
- Mounting Location: Distributor
- Terminal Type: Eye Ring
Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation. A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage. Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket. As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards. As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Standard Ignition

Vehicle

Ignition Coil MSD

Part # P311-2022BDF Manu # 826123 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $339.64

HVC-III Ignition Coil
HVC-III Ignition Coil; Racing Coil For Use w/MSD 7-8 Series Ignition; 0.250 mH Inductance; 45000 Max Volt; 2 Amp Peak Current; 150 uS Spark Duration; 70:1 Turns Ratio; Black;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Adjustable Output Energy Up To 680 Millijoules
- Compatible With 8/6/4 Cylinder Engines
- Spark Current Sense And Recording For Each Firing
- Spark Duration Of Greater Than 250 Microseconds
- Rated For Continuous Operation At An Output Of 600 mJ
- Operates Between 12- 28V
- Starting And Running Down To Six Volts
- Programmable Trigger Edge
- Reverse Battery Protection
- Internally Protected From Damage
- Diagnostic Led Detects The Presence Of Faults
- On-The-Fly Power Output Selection Wire
The HVC III Coil is completely built in-house so our engineers have exclusive control over their performance and quality. The Coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting-edge winding material that has improved insulation and is also capable of enduring extreme voltages. Together, these materials create a durable coil with incredible voltage capabilities, lightning-quick rise time, and longer spark duration. Equipped with an industry-first third terminal to allow secondary current sensing, for each spark, when used in conjunction with the MSD 8001 Pro 600 Single Channel ignition.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2006 Chrysler Pacifica Ignition Coil