Choose Vehicle Year

  1. Previous
  2. Home
  3. 2006
  4. Chrysler
  5. Pacifica
  6. Engine
  7. Engine Oil Pump

Shop By Brand

The Following brands are available based on your search.

  • Boundary Pumps
    Boundary Pumps
  • Earl's Performance
    Earl's Performance

Showing Products For 2006 Chrysler Pacifica Engine Oil Pump

Below are all the different brands and applications for 2006 Chrysler Pacifica Engine Oil Pump

Showing 11 - 19 of 19 Products for Engine Oil Pump.

Refine Your Search

Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-5362AC8    CM-S1  New

Qty:
In Stock & Ready to Ship
$434.17
Boundary Pumps Engine Oil Pump
  • The Coyote Motor oil pump starts with the Ford OEM housing, but is assembled with our billet oil pump gear. This pump comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.
    All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-50F1CF3    MM-OPG-2V  New

Qty:
In Stock & Ready to Ship
$233.54
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 1500whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
    Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible coreInner and outer gear set includedUnique race inspired gerotor designEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-1A6B355    CM-S1-R2  New

Qty:
In Stock & Ready to Ship
$381.09
Boundary Pumps Engine Oil Pump
  • The Coyote Motor oil pump starts with the Ford OEM housing, but is assembled with our billet oil pump gear. This pump also and comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.
    All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-0D13FC0    BA-OPG  New

Qty:
In Stock & Ready to Ship
$317.40
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core.After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 1500whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
    Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthTighter fitting crank mate for a more durable designEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Earl's Performance
Engine Oil Pump Earl's Performance

P311-46057C2    502ERL  New

Qty:
In Stock & Ready to Ship
$191.90
Earl's Performance Engine Oil Pump
  • Billet Oil Thermostat
  • Billet Oil Thermostat; 0.75 in. -16 Center Post; 10AN Female O-Ring Seal; Sandwich Style; Aluminum;
  • Product Attributes:
    • Center Stud Diameter: 0.750 In. -16
    • Fully Open: 180
    • Inner O-Ring Diameter: 2.887 In.
    • O-Ring Cross Section: 0.139 In.
    • Outer O-Ring Diameter: 3.387 In.
    • Port Size: 0.875 In. -14 Female (-10 O-ring Boss)
    • Start to Open Temperature: 160 Degrees Farenheit
    • WARNING CA Proposition 65: No
  • Features:
    • Made For Most Typical Applications
    • Billet Aluminum Sandwich Style
    • Facilitate Quick Oil Warm-Up
  • These billet aluminum units facilitate quick oil warm up. Opening starts at 160*F (71.1C) and they are fully open at 180*F (82.2C).

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Earl's Performance
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-2380E14    RB26N1-OPG  New

Qty:
In Stock & Ready to Ship
$317.40
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core.After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-2BCB3F7    MM-OPG-4V  New

Qty:
In Stock & Ready to Ship
$233.54
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 1500whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
    Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible coreInner and outer gear set includedUnique race inspired gerotor designEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-23984B1    MM-OPG-3V  New

Qty:
In Stock & Ready to Ship
$233.54
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish.What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
    Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Earl's Performance
Engine Oil Pump Earl's Performance

P311-0B34A78    501ERL  New

Qty:
In Stock & Ready to Ship
$190.76
Earl's Performance Engine Oil Pump
  • Oil Thermostat
  • Oil Thermostat; -10AN Female O-Ring Seal; Minimum 160 deg. F; Maximum 180 deg. F;
  • Product Attributes:
    • Dimensions: 4.000 In. X 4.000 In.
    • Fully Open: 180
    • Mount Hole Diameter: 0.250 In.
    • Port Size: 0.875 In. -14 Female (-10 O-ring Boss)
    • Start to Open Temperature: 160 Degrees Farenheit
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Billet Housing
    • Allows Monitoring Of Oil Temp
    • Flow & Pressure
    • Three Sensor Ports
    • Thermostat Design
    • Insures Quick
    • Controlled Warm-Up
  • To insure quick warm up under cold weather conditions, use our oil-stat. This uniquely designed product controls oil temperature like a thermostat controls water temperature in a radiator. Designed for passenger car and light truck usage with Earls Temp-A-Cure(TM) oil coolers. Billet 6061-T6 aircraft aluminum with three sensor ports.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Earl's Performance
Additional Fitment Information:
Vehicle

Showing 11 - 19 of 19 Products for Engine Oil Pump.