2006 Chrysler Pacifica Engine Camshaft Engine

2006 Chrysler Pacifica Engine Camshaft 6 Cyl 3.5L Mopar

Part # P311-4D0C9E5 Manu # W0133-1876451 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,030.93

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Left

Brand: Mopar

Vehicle	Block	Engine	CID	CC
2006 - Chrysler Pacifica	V	6 Cyl 3.5L	215	3497

Engine Camshaft COMP Cams

Part # P311-250C0CC Manu # 54-273-11 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $619.71

HV Cam 218/226 .575/.570 Hyd Roller for GEN III/IV 4.8L/5.3L/6.0L
This COMP Cams® HV NSR cam is designed for GM cathedral port 4.8L/5.3L/6.0L powered vehicles. It provides amazing drivability and throttle response while also requiring minimal tuning.
Product Attributes:
- Advance: 5
- Advertised Exhaust Duration: 278
- Advertised Intake Duration: 271
- Basic Operating RPM Range: 2500 - 6300
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam Grind #: Ls271hv11
- Cam Type: Hydraulic Roller
- Camshaft Intake Centerline: 106
- Camshaft Series: Hv
- Computer Controlled Compatible: Yes
- Direct Injection: No
- Engine Platform: Gm Ls Gen Iii/iv
- Exhaust Close ATDC: -3
- Exhaust Lobe Lift: 0.335
- Exhaust Open BBDC: 49
- Exhaust Valve Lash: Hyd
- Exhaust Valve Lift: 0.57
- Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.57
- Factory Rocker Ratio: 1.7
- Fuel Management Strategy Compatible: No
- Intake Close ABDC: 35
- Intake Duration at .050 Inch Lift: 218
- Intake Lobe Lift: 0.338
- Intake Open BTDC: 3
- Intake Valve Lash: Hyd
- Intake Valve Lift: 0.575
- Intake Valve Lift with Factory Rocker Arm Ratio: 0.575
- Lifter Type:
  - Hydraulic Roller
  - Roller Tappet
- Lobe Separation: 111
- Phaser Requirement: None
- Usage: Street
- Valve Springs Required: Yes
- VVT Compatible: No
This COMP Cams® HV cam is designed for GM cathedral port 4.8L/5.3L/6.0L powered vehicles. It provides amazing drivability and throttle response while also requiring minimal tuning. Torque is increased across the entire operating range while still producing +79 horsepower at peak. Get the most out of your daily driver truck, SUV or 4x4 without sacrificing street manners. The HV cam will provide a deep rumble with a mild, yet noticeable lope. At .575" lift, this cam is designed to take advantage of the inexpensive 26906 valve spring upgrade. Also compatible with stock converters.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Camshaft COMP Cams

Part # P311-4BC8ED4 Manu # 48-600-5 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $372.28

Classic Thumpr 226/241 Hydraulic Flat Cam for Chevrolet 348-409
Performance street with good low end, stock converter ok, needs gears. Choppy/thumping idle.
Product Attributes:
- Advertised Exhaust Duration: 296
- Advertised Intake Duration: 278
- Amazon ASIN: B0046zhl7u
- Assembly Lubricant Included: Yes
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: No
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: N/a
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam Type: Hydraulic Flat Tappet
- Camshaft Gear Attachment: 3-bolt
- Camshaft Material: Cast Iron
- Camshaft Series: Classic Thumpr
- Engine Family: Chevrolet 348-409 C.i. 8 Cylinder (1958-1965)
- Exhaust Valve Lift: 0.498
- Grind Number: 279th7
- Intake Duration at .050 Inch Lift: 226
- Intake Valve Lift: 0.512
- Lifter Type: Hydraulic Flat Tappet
- Lifters Included: No
- Lobe Separation: 107
- Title: Classic Thumpr 226/241 Hydraulic Flat Cam For Chevrolet 348-409
- Valve Springs Required: Yes

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Camshaft COMP Cams

Part # P311-0AC4B99 Manu # 24-278-4 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $350.55

Street and Strip 227/227 Hydraulic Flat Cam for Chrysler 426 HEMI
Good torque and power for daily driven street engines, stock converter. Slightly rough idle.
Product Attributes:
- Advertised Exhaust Duration: 278
- Advertised Intake Duration: 278
- Amazon ASIN: B000n5olny
- Assembly Lubricant Included: Yes
- Basic Operating RPM Range: 2,000-5,000
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: No
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: N/a
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam Type: Hydraulic Flat Tappet
- Camshaft Gear Attachment: 3-bolt
- Camshaft Material: Cast Iron
- Camshaft Series: Street And Strip
- Engine Family: Chrysler 426 Hemi 8 Cylinder (1966-1971)
- Exhaust Valve Lift: 0.486
- Grind Number: 278a-8
- Intake Duration at .050 Inch Lift: 227
- Intake Valve Lift: 0.502
- Lifter Type: Hydraulic Flat Tappet
- Lifters Included: No
- Lobe Separation: 108
- Title: Street And Strip 227/227 Hydraulic Flat Cam For Chrysler 426 Hemi
- Usage: Strip
- Valve Springs Required: Yes

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Camshaft COMP Cams

Part # P311-14C03A0 Manu # 33-230-4 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $324.51

Magnum 2230/230 Hydraulic Flat Cam for Ford 352-428
Works best in street machines with 2000+ stall, lower gears and headers. Rough idle.
Product Attributes:
- Advertised Exhaust Duration: 280
- Advertised Intake Duration: 280
- Amazon ASIN: B000ceqdi2
- Assembly Lubricant Included: Yes
- Basic Operating RPM Range: 2,000-6,000
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: No
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: N/a
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam and Lifter Kit Upgrade: Cl33-230-4
- Cam Type: Hydraulic Flat Tappet
- Camshaft Gear Attachment: 1-bolt
- Camshaft Material: Cast Iron
- Camshaft Series: Magnum
- Engine Family: Ford 352-428 C.i. 8 Cylinder (1963-1977)
- Exhaust Valve Lift: 0.53
- Grind Number: 280h
- Intake Duration at .050 Inch Lift: 230
- Intake Valve Lift: 0.53
- K-Kit Upgrade: K33-230-4
- Lifter Type: Hydraulic Flat Tappet
- Lifters Included: No
- Lobe Separation: 110
- SK-Kit Upgrade: Sk33-230-4
- Title: Magnum 2230/230 Hydraulic Flat Cam For Ford 352-428
- Usage: Street/performance
- Valve Springs Required: Yes

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Camshaft COMP Cams

Part # P311-2445AE4 Manu # 33-240-4 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $296.78

Magnum 244/244 Hydraulic Flat Cam for Ford 352-428
Street/strip, use 9.5:1+ compression with headers, intake, low gears and 3000+ stall. Racy idle.
Product Attributes:
- Advertised Exhaust Duration: 292
- Advertised Intake Duration: 292
- Amazon ASIN: B000n5qcmm
- Assembly Lubricant Included: Yes
- Basic Operating RPM Range: 2,500-6,500
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: No
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: N/a
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam and Lifter Kit Upgrade: Cl33-240-4
- Cam Type: Hydraulic Flat Tappet
- Camshaft Gear Attachment: 1-bolt
- Camshaft Material: Cast Iron
- Camshaft Series: Magnum
- Engine Family: Ford 352-428 C.i. 8 Cylinder (1963-1977)
- Exhaust Valve Lift: 0.56
- Grind Number: 292h
- Intake Duration at .050 Inch Lift: 244
- Intake Valve Lift: 0.56
- K-Kit Upgrade: K33-240-4
- Lifter Type: Hydraulic Flat Tappet
- Lifters Included: No
- Lobe Separation: 110
- SK-Kit Upgrade: Sk33-240-4
- Title: Magnum 244/244 Hydraulic Flat Cam For Ford 352-428
- Usage: Street/performance
- Valve Springs Required: Yes

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Camshaft COMP Cams

Part # P311-101D6F1 Manu # 35-235-3 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $241.82

Xtreme 4x4 210/218 Hydraulic Flat Cam for Ford 351W
Good torque for 4x4, excellent mid-range power, great for RV or towing.
Product Attributes:
- Advertised Exhaust Duration: 262
- Advertised Intake Duration: 254
- Amazon ASIN: B001r9h9os
- Assembly Lubricant Included: Yes
- Basic Operating RPM Range: 1,200-5,200
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: No
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: N/a
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam and Lifter Kit Upgrade: Cl35-235-3
- Cam Type: Hydraulic Flat Tappet
- Camshaft Gear Attachment: 1-bolt
- Camshaft Material: Cast Iron
- Camshaft Series: Xtreme 4x4
- Engine Family: Ford 351w 8 Cylinder (1969-1996)
- Exhaust Valve Lift: 0.493
- Grind Number: X4254h
- Intake Duration at .050 Inch Lift: 210
- Intake Valve Lift: 0.477
- K-Kit Upgrade: K35-235-3
- Lifter Type: Hydraulic Flat Tappet
- Lifters Included: No
- Lobe Separation: 111
- SK-Kit Upgrade: Sk35-235-3
- Title: Xtreme 4x4 210/218 Hydraulic Flat Cam For Ford 351w
- Usage: Street/performance
- Valve Springs Required: Yes

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Camshaft COMP Cams

Part # P311-264AD46 Manu # 35-246-3 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $244.75

Xtreme Energy 230/236 Hydraulic Flat Cam for Ford 351W
Very strong torque and throttle response, 2500+ stall.
Product Attributes:
- Advertised Exhaust Duration: 286
- Advertised Intake Duration: 274
- Amazon ASIN: B000v9cv8o
- Assembly Lubricant Included: Yes
- Basic Operating RPM Range: 1,800-6,000
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: No
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: N/a
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam and Lifter Kit Upgrade: Cl35-246-3
- Cam Type: Hydraulic Flat Tappet
- Camshaft Gear Attachment: 1-bolt
- Camshaft Material: Cast Iron
- Camshaft Series: Xtreme Energy
- Engine Family: Ford 351w 8 Cylinder (1969-1996)
- Exhaust Valve Lift: 0.523
- Grind Number: Xe274h
- Intake Duration at .050 Inch Lift: 230
- Intake Valve Lift: 0.519
- K-Kit Upgrade: K35-246-3
- Lifter Type: Hydraulic Flat Tappet
- Lifters Included: No
- Lobe Separation: 110
- SK-Kit Upgrade: Sk35-246-3
- Title: Xtreme Energy 230/236 Hydraulic Flat Cam For Ford 351w
- Usage: Street/performance
- Valve Springs Required: Yes

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Camshaft COMP Cams

Part # P311-11DE050 Manu # 35-250-4 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $244.72

Xtreme Energy 240/246 Hydraulic Flat Cam for Ford 351W
Street/strip with 2800+ stall, headers, gears, rough idle.
Product Attributes:
- Advertised Exhaust Duration: 296
- Advertised Intake Duration: 284
- Amazon ASIN: B000ciq8x8
- Assembly Lubricant Included: Yes
- Basic Operating RPM Range: 2,300-6,500
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: No
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: N/a
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam and Lifter Kit Upgrade: Cl35-250-4
- Cam Type: Hydraulic Flat Tappet
- Camshaft Gear Attachment: 1-bolt
- Camshaft Material: Cast Iron
- Camshaft Series: Xtreme Energy
- Engine Family: Ford 351w 8 Cylinder (1969-1996)
- Exhaust Valve Lift: 0.544
- Grind Number: Xe284h
- Intake Duration at .050 Inch Lift: 240
- Intake Valve Lift: 0.541
- K-Kit Upgrade: K35-250-4
- Lifter Type: Hydraulic Flat Tappet
- Lifters Included: No
- Lobe Separation: 110
- SK-Kit Upgrade: Sk35-250-4
- Title: Xtreme Energy 240/246 Hydraulic Flat Cam For Ford 351w
- Usage: Street/performance
- Valve Springs Required: Yes

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Camshaft COMP Cams

Part # P311-465E438 Manu # 34-773-9 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $442.26

Xtreme Energy 254/260 Solid Roller Cam for Ford 429,460
Best for Pro Street, 3500+ stall. Needs good intake and exhaust, 11:1+ compression.
Product Attributes:
- Advertised Exhaust Duration: 298
- Advertised Intake Duration: 292
- Amazon ASIN: B001r9bsrm
- Assembly Lubricant Included: No
- Basic Operating RPM Range: 3200-7,200
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: No
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: N/a
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Cam and Lifter Kit Upgrade: Cl34-773-9
- Cam Type: Solid Roller
- Camshaft Gear Attachment: 1-bolt
- Camshaft Material: Billet Steel
- Camshaft Series: Xtreme Energy
- Engine Family: Ford 429, 460 C.i. 8 Cylinder (1968-1995)
- Exhaust Valve Lift: 0.678
- Grind Number: Xr292r-10
- Intake Duration at .050 Inch Lift: 254
- Intake Valve Lift: 0.671
- K-Kit Upgrade: K34-773-9
- Lifter Type: Solid Roller
- Lifters Included: No
- Lobe Separation: 110
- Title: Xtreme Energy 254/260 Solid Roller Cam For Ford 429,460
- Usage: Street/performance
- Valve Springs Required: Yes

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2006 Chrysler Pacifica Engine Camshaft