2006 Chrysler Pacifica Carburetor Heat Insulator Air and Fuel Delivery

Carburetor Heat Insulator Mr Gasket

Part # P311-367ABC5 Manu # 3710 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $66.96

Carburetor Heat Shields
Carburetor Heat Shields; 0.5 in. High; Holley And Carter; Race Only;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Eliminates Fuel Boiling
- Eliminates Vapor-Lock
The Mr. Gasket carburetor heat shield will help eliminate fuel boiling and vapor lock caused by heat conducted from the manifold to the carburetor.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Mr Gasket

Vehicle

Carburetor Heat Insulator Mr Gasket

Part # P311-31B13E6 Manu # 97 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $49.23

Carburetor Heat Dissipators
Carburetor Heat Dissipators; 0.25 in. Thick; For Holley And AFB; Race Only;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Heat-Absorbing Material
- Separated By Aluminum Alloy
- Forces Heat Away
- Stops Vapor-Locking
- Also As A Mounting Gasket
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor. This unit also acts as a carb. mounting gasket.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Mr Gasket

Vehicle

Carburetor Heat Insulator Mr Gasket

Part # P311-29BAB61 Manu # 98A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $47.78

Carburetor Heat Dissipators
Carburetor Heat Dissipators; 0.5 in. Thick; For Holley 3 bbl And Ram Manifolds; Race Only;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Heat-Absorbing Material
- Separated By Aluminum Alloy
- Forces Heat Away
- Stops Vapor-Locking
- Also As A Mounting Gasket
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Mr Gasket

Vehicle

Carburetor Heat Insulator Mr Gasket

Part # P311-071EFA9 Manu # 98 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $65.74

Carburetor Heat Dissipators
Carburetor Heat Dissipators; 0.5 in. Thick; For Holley And AFB; Race Only;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Heat-Absorbing Material
- Separated By Aluminum Alloy
- Forces Heat Away
- Stops Vapor-Locking
- Also As A Mounting Gasket
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Mr Gasket

Vehicle

Carburetor Heat Insulator Edelbrock

Part # P311-4574B0F Manu # 9265 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $37.89

Carburetor Heat Insulator Gasket
Heat Insulator Gasket for Open 4150 Square-Bore-0.320in. Thick
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Helps Prevents Fuel Percolation
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Square Bore Applications Only
- Comes w/Extended Carb Studs
The Edelbrock Square-bore Heat Insulator Gasket #9266 is designed to prevent percolation on Edelbrock Performer Series carburetors exposed to extreme under hood temperatures. This gasket features an open center which will allow open plenum Torker and Victor style manifolds to seal properly to the carburetor. Prior to installation, check air cleaner-to-hood clearance to ensure that additional height of heat insulator gasket will not cause interference. Remove air cleaner and all attachments to the carburetor such as fuel line, throttle linkage, and vacuum lines. Be sure to note the position or tag each piece to facilitate re-installation. Remove the carburetor and set it aside, then remove the old base gasket and any additional plates, such as Edelbrock square-bore adapter #2732. Remove the short carb studs and install the longer studs. Install the #9265 heat insulator gasket directly against the manifold, then replace the carb and all other connections. Note that gasket #9265 is rigid enough to replace square-bore adapter plate #2732, if required.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Carburetor Heat Insulator Edelbrock

Part # P311-104709D Manu # 9266 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $37.50

Carburetor Heat Insulator Gasket
Heat Insulator Gasket for Divided 4150 Square-Bore-0.320in. Thick
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Helps Prevents Fuel Percolation
- For Extreme Underhood Temps
- Square Bore Applications Only
- Comes w/Extended Carb Studs
The Edelbrock Square-bore Heat Insulator Gasket #9266 is designed to prevent percolation on Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures. This gasket features a divided center which will allow dual plane Performer and RPM manifolds to seal properly to the carburetor. Prior to installation, check air cleaner-to-hood clearance to ensure that additional height of heat insulator gasket will Not cause interference. Remove air cleaner and all attachments to the carburetor such as fuel line, throttle linkage, and vacuum lines. Be sure to note the position or tag each piece to facilitate re-installation. Remove the carburetor and set it aside, then remove the old base gasket and any additional plates, such as Edelbrock square-bore adapter #2732. Remove the short carb studs and install the longer studs. Install the #9266 heat insulator gasket directly against the manifold, then replace the carb and all other connections. Note that gasket #9266 is rigid enough to replace square-bore adapter plate #2732, if required.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Carburetor Heat Insulator Edelbrock

Part # P311-03386C5 Manu # 9267 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $50.84

Carburetor Heat Insulator Gasket
DUAL QUAD INSULATOR KIT (2)
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Helps Prevents Fuel Percolation
- For Extreme Underhood Temps
- Square Bore Applications Only
- Comes w/Extended Carb Studs
The Edelbrock Square-bore Dual Quad Heat Insulator Gaskets #9267 are designed to prevent percolation on Thunder Series and Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures. These gaskets feature a four hole design which will allow dual quad Performer and RPM manifolds to seal properly to the carburetor. Prior to installation, check air cleaner-to-hood clearance to ensure that additional height of heat insulator gaskets will not cause interference. Remove air cleaner and all attachments to the carburetors such as fuel lines, throttle linkage, and vacuum lines. Be sure to note the position or tag each piece to facilitate re-installation. Remove the carburetors and set them, aside, then remove the old base gaskets and any additional plates. Remove the short carb studs and install the longer studs. Install the #9267 heat insulator gaskets directly against the manifold, then replace the carbs and all other connections.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Carburetor Heat Insulator Holley

Part # P311-3581D80 Manu # 108-70 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $68.97

Heat Shield
Heat Shield; For Models 4010/4150/4160;
Product Attributes:
- Flange Type: 4150/4160
- WARNING CA Proposition 65: No
Features:
- Fits Holley Model 4010™ Model 4150™/ Model 4160™
- Steel Material
Heat Shield Kit for Model 4010, Model 4150, and Model 4160

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Shop By Brand

Showing Products For 2006 Chrysler Pacifica Carburetor Heat Insulator