Finish Selecting Your Vehicle

Choose your Submodel for your 2006 Chevrolet Impala

  • LS
  • LT
  • LTZ
  • Police
  • SS

Shop By Brand

The Following brands are available based on your search.

  • Accudrive Racks
    Accudrive Racks
  • Autopart International
    Autopart International
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Flaming River
    Flaming River
  • Ford Racing
    Ford Racing
  • Mapco
    Mapco
  • PWR
    PWR

Showing Products For 2006 Chevrolet Impala Rack and Pinion Assembly

Below are all the different brands and applications for 2006 Chevrolet Impala Rack and Pinion Assembly

Showing 1 - 10 of 22 Products for Rack and Pinion Assembly.

Refine Your Search

Cardone
2006 Chevrolet Impala Rack and Pinion Assembly 6 Cyl 3.9L Cardone - Rack and Pinion Assembly

P311-0956262    22-1003  Remanufactured

19207776 , 19207778 , 19330464 , 26079917 , 26079918 , 26079929 , 88955439 , 88955444 , 88964318 , 88964319 , 88965490 , TR26021769

Qty:
In Stock & Ready to Ship
$49.50 $187.28
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.78
    • Input Shaft Diameter (mm): 19.89
    • Input Shaft Length (in): 1.88
    • Input Shaft Length (mm): 47.63
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 49.75
    • Rack Length (mm): 1263.65
    • Return Port ID Size: 0.24
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 59.79
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Chevrolet Impala V 6 Cyl 3.9L 237 3880
Cardone
2006 Chevrolet Impala Rack and Pinion Assembly 8 Cyl 5.3L Cardone - Rack and Pinion Assembly

P311-23DE874    22-1012  Remanufactured

19207777 , 88955466 , 88964322

Qty:
In Stock & Ready to Ship
$77.40 $135.96
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.79
    • Input Shaft Diameter (mm): 19.94
    • Input Shaft Length (in): 1.75
    • Input Shaft Length (mm): 44.45
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.75
    • Rack Length (mm): 1238.25
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.08
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Chevrolet Impala V 8 Cyl 5.3L 325 5328
Accudrive Racks
2006 Chevrolet Impala Rack and Pinion Assembly 6 Cyl 3.5L Accudrive Racks

P311-1AC996C    3524  New

Qty:
In Stock & Ready to Ship
$50.00 $179.22
  • Century/Regal/Impala/Grand Prix w/o Magnasteer
  • Power Rack
Brand: Accudrive Racks
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Chevrolet Impala V 6 Cyl 3.5L 213 3490
Mapco
2006 Chevrolet Impala Rack and Pinion Assembly 6 Cyl 3.9L Mapco

P311-1F25A67    95318M  New

22-1003 , 26079917 , 64189

Qty:
In Stock & Ready to Ship
$100.00 $223.56
  • RACK AND PINION COMPLETE UNIT
  • 2.75 Pinion turns lock to lock.
Brand: Mapco
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Chevrolet Impala V 6 Cyl 3.9L 237 3880
PWR
2006 Chevrolet Impala Rack and Pinion Assembly 6 Cyl 3.5L PWR

P311-5DD8D65    42-2071  New

Qty:
In Stock & Ready to Ship
$538.58
PWR Rack and Pinion Assembly
  • New Hydraulic Power Rack and Pinion
  • Product Attributes:
    • End To End Length: 1238
    • Grade Type: Regular
    • Inlet Line Fitting Diameter: 18
    • Inlet Line Fitting Gender: Female
    • Inner Tie Rods Included: Yes
    • Mounting Brackets Included: No
    • Mounting Hardware Included: No
    • Mounting Hole Quantity: 2
    • Outer Tie Rods Included: No
    • Outlet Line Fitting Gender: Female
    • Steering Input Shaft Diameter: 19.9
  • Direct Fit - to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks & Gears are 100% tested for leaks, pressure, noise and function
Brand: PWR
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Chevrolet Impala V 6 Cyl 3.5L 213 3490
PWR
2006 Chevrolet Impala Rack and Pinion Assembly 8 Cyl 5.3L PWR

P311-30EB588    42-1410  New

Qty:
In Stock & Ready to Ship
$573.01
PWR Rack and Pinion Assembly
  • New Hydraulic Power Rack and Pinion
  • Product Attributes:
    • End To End Length: 1264
    • Grade Type: Regular
    • Inlet Line Fitting Diameter: 18
    • Inlet Line Fitting Gender: Female
    • Inner Tie Rods Included: Yes
    • Mounting Brackets Included: No
    • Mounting Hardware Included: No
    • Mounting Hole Quantity: 2
    • Outer Tie Rods Included: No
    • Outlet Line Fitting Gender: Female
    • Steering Input Shaft Diameter: 19.8
  • Direct Fit - to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks & Gears are 100% tested for leaks, pressure, noise and function
Brand: PWR
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Chevrolet Impala V 8 Cyl 5.3L 325 5328
Cardone
2006 Chevrolet Impala Rack and Pinion Assembly Cardone - w/o Outer Tie Rod Ends

P311-24825F5    W0133-2222833  New

Qty:
In Stock & Ready to Ship
$76.00 $359.60
Cardone Rack and Pinion Assembly
  • Reman Complete Long Rack
  • w/o Outer Tie Rod Ends
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel
2006 - Chevrolet Impala Police
Cardone
2006 Chevrolet Impala Rack and Pinion Assembly Cardone - w/o Outer Tie Rod Ends

P311-2D085F9    W0133-2223193  New

Qty:
In Stock & Ready to Ship
$60.00 $317.04
Cardone Rack and Pinion Assembly
  • Reman Complete Long Rack
  • w/o Outer Tie Rod Ends
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel
2006 - Chevrolet Impala SS
Autopart International
2006 Chevrolet Impala Rack and Pinion Assembly Autopart International

P311-0F00268    W0133-3783560  Remanufactured

Qty:
In Stock & Ready to Ship
$40.00 $582.39
Autopart International Rack and Pinion Assembly
  • Remanufactured
Brand: Autopart International
Additional Fitment Information:
Vehicle Submodel
2006 - Chevrolet Impala SS
BBB Industries
2006 Chevrolet Impala Rack and Pinion Assembly 6 Cyl 3.5L BBB Industries - Reman Rack and Pinion

P311-23615B3    103-0170  Remanufactured

19320498 , 26079917

Qty:
In Stock & Ready to Ship
$70.00 $215.32
BBB Industries Rack and Pinion Assembly
  • Power Steering
  • Reman Rack and Pinion
  • Product Attributes:
    • Bushings Included: Yes
    • Distance Between Mounting Holes (mm): 311.15
    • Hydraulic or Electric: Hydraulic
    • Inner Tie Rods Included: Yes
    • Input Shaft Diameter (mm): 17.463
    • Input Shaft Length (mm): 47.625
    • Mounting Hole Quantity: 2
    • Outer Tie Rods Included: No
    • Pressure Port Thread Size: M18x1.50
    • Rack Length (mm): 1263.65
    • Return Port Thread Size: M16x1.50
    • Turns Lock To Lock: 2.375
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Chevrolet Impala V 6 Cyl 3.5L 213 3490

Showing 1 - 10 of 22 Products for Rack and Pinion Assembly.