Finish Selecting Your Vehicle

Choose your Engine for your 2006 Cadillac STS

  • 6 Cyl 3.6L
  • 8 Cyl 4.4L
  • 8 Cyl 4.6L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Cardone
    Cardone
  • Dorman
    Dorman
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • MSD
    MSD
  • Standard Ignition
    Standard Ignition
  • Vemo
    Vemo

Showing Products For 2006 Cadillac STS Fuel Injection Throttle Body

Below are all the different brands and applications for 2006 Cadillac STS Fuel Injection Throttle Body

Showing 1 - 10 of 42 Products for Fuel Injection Throttle Body.

Refine Your Search

ACDelco
2006 Cadillac STS Fuel Injection Throttle Body 8 Cyl 4.4L ACDelco

P311-06E9279    W0133-1802699  New

Qty:
In Stock & Ready to Ship
$189.56
ACDelco Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
Brand: ACDelco
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Cadillac STS V 8 Cyl 4.4L 267 4371
ACDelco
2006 Cadillac STS Fuel Injection Throttle Body 6 Cyl 3.6L ACDelco

P311-1E5A0AD    W0133-1801255  New

Qty:
In Stock & Ready to Ship
$499.72
ACDelco Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
Brand: ACDelco
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Cadillac STS V 6 Cyl 3.6L 217 3564
ACDelco
2006 Cadillac STS Fuel Injection Throttle Body 6 Cyl 3.6L ACDelco

P311-45E64C4    217-2253  New

Qty:
In Stock & Ready to Ship
$315.26
  • Fuel Injection Throttle Body
Brand: ACDelco
Additional Fitment Information:
Vehicle Engine Designation Drive Type Engine VIN Block Engine
2006 - Cadillac STS LY7 RWD 7 V 6 Cyl 3.6L
ACDelco
2006 Cadillac STS Fuel Injection Throttle Body 8 Cyl 4.4L ACDelco - Fuel Injection Throttle Body; INCLUDES THROTTLE ACTUATOR

P311-071A40B    217-2294  New

Qty:
In Stock & Ready to Ship
$121.13
ACDelco Fuel Injection Throttle Body
  • Fuel Injection Throttle Body; INCLUDES THROTTLE ACTUATOR
Brand: ACDelco
Additional Fitment Information:
Vehicle Drive Type Engine VIN Block Engine
2006 - Cadillac STS RWD D V 8 Cyl 4.4L
Cardone
2006 Cadillac STS Fuel Injection Throttle Body 6 Cyl 3.6L Cardone - Fuel Injection Throttle Body

P311-50E622D    67-3016  Remanufactured

12589056 , 12592916

Qty:
In Stock & Ready to Ship
$28.80 $121.51
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Package Contents: Electronic Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Cadillac STS V 6 Cyl 3.6L 217 3564
Cardone
2006 Cadillac STS Fuel Injection Throttle Body 8 Cyl 4.6L Cardone - Fuel Injection Throttle Body

P311-11AE427    67-3025  Remanufactured

12602800 , 12615495

Qty:
In Stock & Ready to Ship
$16.20 $114.46
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Idle Air Control Motor Included: No
    • Package Contents: Electronic Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Cadillac STS V 8 Cyl 4.6L 281 -
Cardone
2006 Cadillac STS Fuel Injection Throttle Body 8 Cyl 4.4L Cardone - Fuel Injection Throttle Body

P311-34467A3    67-3027  Remanufactured

12567376

Qty:
In Stock & Ready to Ship
$16.20 $99.46
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Package Contents: Electronic Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Cadillac STS V 8 Cyl 4.4L 267 4371
Standard Ignition
2006 Cadillac STS Fuel Injection Throttle Body 6 Cyl 3.6L Standard Ignition

P311-2B09AEC    S20004  New

0280750202 , 12589056 , 217-2253 , 60191861 , 67-3016 , ETB118 , ETBB10012 , TB1045 , TB1045D

Qty:
In Stock & Ready to Ship
$228.01
Standard Ignition Fuel Injection Throttle Body
  • Fuel Injection Throttle Body
  • Product Attributes:
    • Connector Gender: Female
    • Contents: 1 Throttle Body
    • Terminal Gender: Male
    • Terminal Quantity: 6
    • Terminal Type: Blade
  • 100% NEW, never remanufactured, which maximizes performance and extends service life. Undergoes extensive testing to ensure quality and reliability out of the box. Matches OE response time for peak performance on drive by wire systems. All TechSmart® parts meet or exceed OE performance, providing today's technician with the quality parts needed to get the job done right, the first time.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Cadillac STS V 6 Cyl 3.6L 217 3564
Standard Ignition
2006 Cadillac STS Fuel Injection Throttle Body 8 Cyl 4.4L Standard Ignition

P311-2547181    S20005  New

12567376 , 217-2294 , 67-3027 , ETB104 , ETBC20057 , TB1089 , TB1089D

Qty:
In Stock & Ready to Ship
$150.79
Standard Ignition Fuel Injection Throttle Body
  • Fuel Injection Throttle Body
  • Product Attributes:
    • Connector Gender: Female
    • Contents: 1 Throttle Body
    • Terminal Gender: Male
    • Terminal Quantity: 6
    • Terminal Type: Pin
  • 100% NEW, never remanufactured, which maximizes performance and extends service life. Undergoes extensive testing to ensure quality and reliability out of the box. Matches OE response time for peak performance on drive by wire systems. All TechSmart® parts meet or exceed OE performance, providing today's technician with the quality parts needed to get the job done right, the first time.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Cadillac STS V 8 Cyl 4.4L 267 4371
Dorman
2006 Cadillac STS Fuel Injection Throttle Body 8 Cyl 4.6L Dorman

P311-08B6CD4    977-799  New

67-3027 , S20005 , TB1087 , TB1089

Qty:
In Stock & Ready to Ship
$130.91
Dorman Fuel Injection Throttle Body
  • Electronic Throttle Body
  • Product Attributes:
    • Adjustable: No
    • Airflow Rate: 102.187 Cfm
    • Bore Diameter: 80
    • Connector/Terminal Type: Pin
    • Electrical Connection Type: Male
    • Fuel Injectors Included: No
    • Fuel System Grade: Gas
    • Fuel System Injection Type: Gas
    • Fuel System Type: Gas
    • Housing Material: Aluminum; Plastic
    • Idle Air Control Motor Included: No
    • Inlet Diameter: 89
    • Inlet Type: Flanged
    • Installation Hardware Included: No
    • Mounting Hardware Included: No
    • Outlet Diameter: 80
    • Outlet Type: Non-flanged
    • Package Contents: 1 Throttle Body Unit
    • Terminal Count: 6
    • Throttle Body Finish:
      • Natural
      • Silver
    • Throttle Body Material: Aluminum
    • Throttle Body Mounted: No
    • Throttle Body Spacer Included: No
    • Throttle Body Type: Electronic
    • Throttle Position Sensor Included: Yes
    • Venturi Quantity: 0
  • Features:
    • Direct replacement - this electronic throttle body matches the original equipment throttle body for fit and function
    • Plug and play installation - this throttle body plugs into the original equipment wiring harness with no adapter required
    • Cost-effective and reliable - offers original manufacturer quality at a competitive price with no core charge
    • Rigorously tested - this throttle body has undergone corrosion and try-on testing to ensure durability for a long service life
  • This 100% new electronic throttle body matches the original equipment part for fit and performance. With a corrosion-resistant aluminum body, it features a new sensor and circuit board for reliable performance.
Brand: Dorman
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Cadillac STS V 8 Cyl 4.6L 281 -

Showing 1 - 10 of 42 Products for Fuel Injection Throttle Body.