Finish Selecting Your Vehicle

Choose your Submodel for your 2006 Audi A4 Quattro

  • Avant
  • Base

Shop By Brand

The Following brands are available based on your search.

  • Continental
    Continental
  • Delphi
    Delphi
  • Holley
    Holley
  • TYC Products
    TYC Products
  • VDO
    VDO

Showing Products For 2006 Audi A4 Quattro Fuel Pump Module Assembly

Below are all the different brands and applications for 2006 Audi A4 Quattro Fuel Pump Module Assembly

Showing 1 - 10 of 23 Products for Fuel Pump Module Assembly.

Refine Your Search

VDO
2006 Audi A4 Quattro Fuel Pump Module Assembly 6 Cyl 3.2L VDO - with Sending Unit

P311-295640D    W0133-1823931  New

Qty:
In Stock & Ready to Ship
$264.11
VDO Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • with Sending Unit
Brand: VDO
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Audi A4 Quattro V 6 Cyl 3.2L - 3123
VDO
2006 Audi A4 Quattro Fuel Pump Module Assembly 6 Cyl 3.0L VDO - with Sending Unit

P311-584A87D    W0133-1774315  New

Qty:
In Stock & Ready to Ship
$494.14
VDO Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Use (1) 8E0 201 263G Fuel Fitting.
  • with Sending Unit
Brand: VDO
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Audi A4 Quattro V 6 Cyl 3.0L - 2976
TYC Products
2006 Audi A4 Quattro Fuel Pump Module Assembly TYC Products - TYC CRQ Premium Fuel Pump Module

P311-0C71582    150334-A  New

580-2120 , 8E0919051CQ , E8681M , FG0977 , P77072M , SP5103M

Qty:
In Stock & Ready to Ship
$129.17
TYC Products Fuel Pump Module Assembly
  • TYC CRQ Premium Fuel Pump Module
  • Product Attributes:
    • Accessories Included: No
    • Connector Pins Qty On Main Connector: 4pins
    • Fuel Level Sensor Resitance Range: 300-47
    • Fuel Tube Connection Type: Quick Connect
    • Gph (gallons Per Hour Flow): 55-65
    • Maximum Air Pressure: 115-159.5
    • Strainer Included: Yes(internal)
Brand: TYC Products
Additional Fitment Information:
Vehicle Submodel Body Drive Type
2006 - Audi A4 Quattro Base Sedan AWD
Delphi
2006 Audi A4 Quattro Fuel Pump Module Assembly 4 Cyl 2.0L Delphi

P311-45BDBDE    FG0977  New

69818 , 8E0 919 051 CQ , 8E0919051CQ , A30514 , A33079 , CFG0977 , E8681M , P77072M , SP5103M

Qty:
In Stock & Ready to Ship
$287.99
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 9
    • Average Flow Rating: 45
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 109.0
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 3
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 300.0
    • Resistance Ohms Full: 46.0
    • Strainer Included: Yes
    • System Pressure: 87 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Pin
    • Vapor Pressure Sensor: No
    • Voltage: 12.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Audi A4 Quattro L 4 Cyl 2.0L 121 1984
Continental
2006 Audi A4 Quattro Fuel Pump Module Assembly 4 Cyl 2.0L Continental

P311-3B15C69    228-235-040-006Z  New

69818 , 8E0919051AL , 8E0919051CQ , E8681M , SP5103M

Qty:
In Stock & Ready to Ship
$206.28
Continental Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Reuse Tank Seal
  • Product Attributes:
    • Average Flow Rating: 45
    • Connector Shape: Oval
    • Fuel Sending Unit Included: Yes
    • Fuel Type: Gas
    • Inlet Outside Diameter: 0.375
    • Installation Warnings: Yes
    • Minimum Pressure: 109
    • Negative Ground: Yes
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 3
    • Pump Type: Electric
    • Resistance Ohms Full: 295
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
  • Continental fuel modules are a genuine OEM part. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Continental fuel modules are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being a genuine OEM part while still maintaining a competitive price.
Brand: Continental
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Audi A4 Quattro L 4 Cyl 2.0L 121 1984
Continental
2006 Audi A4 Quattro Fuel Pump Module Assembly 6 Cyl 3.0L Continental

P311-22537C7    A2C53103692Z  New

8E0919051BM , E9081M

Qty:
In Stock & Ready to Ship
$413.81
Continental Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Reuse Tank Seal
  • Product Attributes:
    • Average Flow Rating: 90
    • Connector Shape: Oval
    • Fuel Sending Unit Included: Yes
    • Fuel Type: Gas
    • Inlet Outside Diameter: 0.313
    • Installation Warnings: Yes
    • Minimum Pressure: 135
    • Negative Ground: Yes
    • Outlet Quantity: 3
    • Pump Type: Electric
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
  • Continental fuel modules are a genuine OEM part. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Continental fuel modules are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being a genuine OEM part while still maintaining a competitive price.
Brand: Continental
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Audi A4 Quattro V 6 Cyl 3.0L - 2976
Delphi
Fuel Pump Module Assembly Delphi

P311-1AC5F71    FG1483  New

3924710C1 , EFG1483

Qty:
In Stock & Ready to Ship
$259.10
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 46
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 80.0
    • Notes: Used On 2012 F64 Navistar
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 54 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Delphi
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-1C60504    12-319  New

Qty:
In Stock & Ready to Ship
$444.61
Holley Fuel Pump Module Assembly
  • OEM Style EFI Fuel Tank Modules
  • OEM Style EFI Fuel Tank Modules; 255 LPH; Includes Fuel Level Sending Unit/Hydra Mat/Internal Fuel Pressure Regulator;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • In-Tank High Pressure 255 lph Unit
    • Fuel Pressure Is Internally Regulated To 58 PSI
    • A Pre-calibrated Fuel-level Sending Unit 73-10 Ohm
    • This Module Also Features A HydraMat Filter
    • HydraMart Filter Also Provides Protection From Contaminate
  • This 1963-1976 Dodge/Plymouth A Body Muscle Car EFI Fuel Pump modules are designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line, just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line. This Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat. HydraMat is an amazing patent-pending fuel reservoir system that reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-3FEFDF7    12-130  New

Qty:
In Stock & Ready to Ship
$651.43
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Material: Billet Aluminum
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Holley manufactures high performance carburetors, manifolds, superchargers, water pumps, throttle body fuel injection and fuel pumps for street and race applications. In producing these parts, Holley prides itself in utilizing the latest technology in a lean environment to provide the highest quality parts at the best value to the customer. CNC programs can be generated on a workstation, directly from a customer's solid model. Each engineering work station is networked to each of the CNC machining centers and CNC turning centers. This configuration provides a streamlined flow of data throughout the factory, as well as data acquisition capabilities. Fixture and tool design can be accomplished in house, utilizing Pro/Engineer software. A computerized PM (preventative maintenance) network application is used to ensure all machinery is performing at the highest level. Holley's machining departments range from small drilling and tapping centers to large four and five-axis high speed machining centers. Many are equipped with automatic pallet changers to facilitate the highest level of spindle up-time. Also included are CNC turning centers. An in-house tool room and maintenance department is comprised of a CNC wire EDM, CNC die-sinking EDM, Ewag tool grinder, and a host of manual machines.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-5707EB8    19-370  New

Qty:
In Stock & Ready to Ship
$430.35
Holley Fuel Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly; Return Style; 6-Bolt Flange; 340 LPH Drop-In Module; 6AN Inlet/6AN Outlet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Update Your Fuel Cell To EFI The Easy Way
    • Designed To Drop Right In Your Existing 6/12 Bolt Flange
    • Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
  • Updating your racing fuel system to EFI is so simple! Sniper is introducing their latest Diecast Fuel Cell EFI Pump Modules. The modules were designed to drop in as a direct replacement for your existing 6 or 12 bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an 6AN inlet port, a 6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5" to 11" deep. The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 23 Products for Fuel Pump Module Assembly.