Finish Selecting Your Vehicle

Choose your Engine for your 2005 Cadillac XLR

  • 8 Cyl 4.6L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Cardone
    Cardone
  • Dorman
    Dorman
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • MSD
    MSD
  • Standard Ignition
    Standard Ignition

Showing Products For 2005 Cadillac XLR Fuel Injection Throttle Body

Below are all the different brands and applications for 2005 Cadillac XLR Fuel Injection Throttle Body

Showing 1 - 10 of 36 Products for Fuel Injection Throttle Body.

Refine Your Search

ACDelco
2005 Cadillac XLR Fuel Injection Throttle Body ACDelco

P311-06E9279    W0133-1802699  New

Qty:
In Stock & Ready to Ship
$189.56
ACDelco Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
Brand: ACDelco
Additional Fitment Information:
Vehicle
2005 - Cadillac XLR
ACDelco
2005 Cadillac XLR Fuel Injection Throttle Body 8 Cyl 4.6L ACDelco - Fuel Injection Throttle Body; INCLUDES THROTTLE ACTUATOR

P311-071A40B    217-2294  New

Qty:
In Stock & Ready to Ship
$121.13
ACDelco Fuel Injection Throttle Body
  • Fuel Injection Throttle Body; INCLUDES THROTTLE ACTUATOR
Brand: ACDelco
Additional Fitment Information:
Vehicle Engine Designation Engine VIN Block Engine
2005 - Cadillac XLR LH2 A V 8 Cyl 4.6L
Cardone
2005 Cadillac XLR Fuel Injection Throttle Body 8 Cyl 4.6L Cardone - Fuel Injection Throttle Body

P311-34467A3    67-3027  Remanufactured

12567376

Qty:
In Stock & Ready to Ship
$16.20 $99.46
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Package Contents: Electronic Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2005 - Cadillac XLR V 8 Cyl 4.6L 281 -
Standard Ignition
2005 Cadillac XLR Fuel Injection Throttle Body 8 Cyl 4.6L Standard Ignition

P311-2547181    S20005  New

12567376 , 217-2294 , 67-3027 , ETB104 , ETBC20057 , TB1089 , TB1089D

Qty:
In Stock & Ready to Ship
$150.79
Standard Ignition Fuel Injection Throttle Body
  • Fuel Injection Throttle Body
  • Product Attributes:
    • Connector Gender: Female
    • Contents: 1 Throttle Body
    • Terminal Gender: Male
    • Terminal Quantity: 6
    • Terminal Type: Pin
  • 100% NEW, never remanufactured, which maximizes performance and extends service life. Undergoes extensive testing to ensure quality and reliability out of the box. Matches OE response time for peak performance on drive by wire systems. All TechSmart® parts meet or exceed OE performance, providing today's technician with the quality parts needed to get the job done right, the first time.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
2005 - Cadillac XLR V 8 Cyl 4.6L 281 -
Dorman
2005 Cadillac XLR Fuel Injection Throttle Body 8 Cyl 4.6L Dorman

P311-08B6CD4    977-799  New

67-3027 , S20005 , TB1087 , TB1089

Qty:
In Stock & Ready to Ship
$130.91
Dorman Fuel Injection Throttle Body
  • Electronic Throttle Body
  • Product Attributes:
    • Adjustable: No
    • Airflow Rate: 102.187 Cfm
    • Bore Diameter: 80
    • Connector/Terminal Type: Pin
    • Electrical Connection Type: Male
    • Fuel Injectors Included: No
    • Fuel System Grade: Gas
    • Fuel System Injection Type: Gas
    • Fuel System Type: Gas
    • Housing Material: Aluminum; Plastic
    • Idle Air Control Motor Included: No
    • Inlet Diameter: 89
    • Inlet Type: Flanged
    • Installation Hardware Included: No
    • Mounting Hardware Included: No
    • Outlet Diameter: 80
    • Outlet Type: Non-flanged
    • Package Contents: 1 Throttle Body Unit
    • Terminal Count: 6
    • Throttle Body Finish:
      • Natural
      • Silver
    • Throttle Body Material: Aluminum
    • Throttle Body Mounted: No
    • Throttle Body Spacer Included: No
    • Throttle Body Type: Electronic
    • Throttle Position Sensor Included: Yes
    • Venturi Quantity: 0
  • Features:
    • Direct replacement - this electronic throttle body matches the original equipment throttle body for fit and function
    • Plug and play installation - this throttle body plugs into the original equipment wiring harness with no adapter required
    • Cost-effective and reliable - offers original manufacturer quality at a competitive price with no core charge
    • Rigorously tested - this throttle body has undergone corrosion and try-on testing to ensure durability for a long service life
  • This 100% new electronic throttle body matches the original equipment part for fit and performance. With a corrosion-resistant aluminum body, it features a new sensor and circuit board for reliable performance.
Brand: Dorman
Additional Fitment Information:
Vehicle Block Engine CID CC
2005 - Cadillac XLR V 8 Cyl 4.6L 281 -
MSD
Fuel Injection Throttle Body MSD

P311-19FC7EE    2910  New

Qty:
In Stock & Ready to Ship
$1,835.31
MSD Fuel Injection Throttle Body
  • Atomic EFI Basic Kit Throttle Body
  • Atomic EFI Basic Kit Throttle Body; Carburetor Replacement Upgrade To EFI TBI [Basic Kit]; Includes Throttle Body/Power Module/Wide Band O2 Sensor/Harnesses/Handheld Programmer;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Carb Approved
    • 8 Connections
    • Single Fuel Line
    • Self Tuning
    • No Laptop
    • Fuel Pump And Regulator Not Included
  • The Atomic system is based on an easy-to-install throttle body design that will provide modern drive ability benefits to street rods and muscle cars – anything with a carburetor. Note the sanitary and traditional look of the unit. It's meant to replace a standard square bore carburetor and can be installed by the average car guy and a friend in a home garage with simple tools within a weekend. In fact, with a little preparation, you should be able to start Saturday morning and make the cruise that night! We wanted to make EFI easy which means less wiring, self learning technology and a return less fuel system. This means you can incorporate the factory fuel line in most applications and you don't have to modify the tank or sending unit with a second line. Plus, the system is self learning and measures pressure and temperature so that once it is installed it's done. No lap top is needed for programming as everything is done through a simple hand-held monitor. As for the wiring, it's almost too simple with only 8 wires you will need to connect. Another cool feature is that the Atomic gives you the ability to control the ignition timing! MSD is an ignition company after all, so it makes sense that we deliver the tools for you to control fuel delivery and timing together in one system!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
FAST
Fuel Injection Throttle Body FAST

P311-03D4B79    54091  New

Qty:
In Stock & Ready to Ship
$623.18
  • Big Mouth LT Billet 92mm Throttle Body for GM LS with TPS and IAC
  • Our Big Mouth 92mm Throttle Body for GM LS features a black wrinkle powder coating finish along with an improved throttle blade and pivot. In addition, our throttle body improves throttle response and eliminates blade deflection.
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Big Mouth Lt Billet 92mm Throttle Body For Gm Ls W/ Tps And Iac
  • Features:
    • Includes our 54020 throttle position sensor and 307059 IAC.
  • FAST Big Mouth Throttle Bodies for the LSX 92mm and LSXR

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
FAST
Fuel Injection Throttle Body FAST

P311-01E32B0    54090  New

Qty:
In Stock & Ready to Ship
$492.41
  • Big Mouth LT Billet 92mm Throttle Body for GM LS
  • Our Big Mouth 92mm Throttle Body for GM LS features a black wrinkle powder coating finish along with an improved throttle blade and pivot. In addition, our throttle body improves throttle response and eliminates blade deflection.
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Big Mouth Lt Billet 92mm Throttle Body For Gm Ls
  • FAST Big Mouth Throttle Bodies for the LSX 92mm and LSXR

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
Holley
Fuel Injection Throttle Body Holley

P311-33A3E5E    112-121  New

Qty:
In Stock & Ready to Ship
$248.27
Holley Fuel Injection Throttle Body
  • Throttle Body Kit
  • Throttle Body Kit; For Use w/Carburetor PN[0-80541-1];
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Throttle Body Kit
    • For Use w/Carburetor PN[0-80528-1]
  • Throttle Body Kit, 0-80541-1

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Injection Throttle Body Holley

P311-35AD39B    550-443  New

Qty:
In Stock & Ready to Ship
$3,760.95
Holley Fuel Injection Throttle Body
  • Terminator® Throttle Body
  • Terminator® Throttle Body; EFI 4bbl Throttle Body w/GM Transmission Control; Includes Tuner; 4150 Style Mounting Flange; For Use w/GM 4L60E/4L80E Transmission; Hardcore Gray;
  • Product Attributes:
    • CFM: 950
    • Flange: 4150
    • Injector Size: 80 Lb/hr @ 43psi
    • Pressure: 43 Psi
    • Throttle Bore: 1.750 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Fully Self-Tuning Ecu - No Laptop Required
    • Trouble-Free w/Fuels An End To Vapor Lock/Fuel Varnish Problems
    • Carburetor Looks With The Drivability Of EFI
    • Timing Control Option For Gm Small Cap Hei/Ford Tfi Distributors
    • Full Color 3.5 Touch Screen LCD For Basic/Advanced Tuning Options
    • Optional Free Software Upgrade For Full Laptop Control
    • Easy Plug And Play Harnesses With Minimal Connections
    • Virtually Maintenance Free Keeps Vehicle Reliable/Ready To Drive
  • Have you been hesitant on switching to EFI because you like the traditional look of a carburetor? Do you have a GM 4L60E/80E Transmission in your hotrod? There is no more need to worry! Holley has you covered with the new Terminator Stealth Throttle Body Fuel injection System. Now you can have all of the benefits of EFI yet, maintain the traditional looks of a carburetor. Holleys Terminator Stealth EFI systems have the same great self-tuning features of our Terminator EFI in a new stealthy package!- Easy to install - No computer experience required - Handheld tuner included - Simple multiple choice set-up wizard - Self-tunes while you drive - Upgradable to complete laptop control without buying another ECU - Carburetor replacement EFI from the fuel systems experts!- Plug and Play with GM 4L60E and 4L80E Transmissions

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 36 Products for Fuel Injection Throttle Body.