2004 Volkswagen Golf Engine Oil Pump Engine - Autopart International, Boundary Pumps, Earl's Performance, Febi, Hella, Pierburg, Skyward, Vaico

2004 Volkswagen Golf Engine Oil Pump 4 Cyl 1.8L Hella

Part # P311-0921798 Manu # 7.07919.01.0 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 06A115105 , 06A115105A , 06A115105B , 06A115105C , 06A115105D , 06A115105H , 109 790 , 1100687 , 1124931 , 130046610 , 22204 , 30 92 2204 , 30115010506AB , 32 93 3751 , 359002100050 , 42-0018 , 711227 , BSP20297 , OP-VW02 , XM216600AA , XM216600BA

Qty:

In Stock & Ready to Ship

Best Price: $126.14

with OE No. 06A 115 105 B
Oil Pump

Brand: Hella

Vehicle	Engine Designation	Block	Engine	CID	CC
2004 - Volkswagen Golf	AWP	L	4 Cyl 1.8L	-	1781

Engine Oil Pump Boundary Pumps

Part # P311-5362AC8 Manu # CM-S1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $434.17

The Coyote Motor oil pump starts with the Ford OEM housing, but is assembled with our billet oil pump gear. This pump comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.
All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Engine Oil Pump Boundary Pumps

Part # P311-0633745 Manu # MM-S1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $391.71

The Mod Motor oil pump from Boundary utilizes the Ford 3V housing, and comes installed with our mirror finish billet gears. The 3V housing includes the largest pump gears and provides the most flow of any of the available pumps (DOHC and early SOHC).This will provide a boost in mid-range and low end engine protection, as well as the larger gear being stronger.All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished billet gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.Pump is plug and play for all 15/16ths pickup tube vehicles and requires no additional lubrication or work. Bolt on and go!Fits: All Mod Moters Expect 6.2L

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Engine Oil Pump Boundary Pumps

Part # P311-19DB8FC Manu # CM-OPG-F150 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $233.54

Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish.What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warranty’s.
Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthEach set hand, machine, and hardness inspected with Blueprinting Report

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Engine Oil Pump Boundary Pumps

Part # P311-2BCB3F7 Manu # MM-OPG-4V Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $233.54

Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 1500whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible coreInner and outer gear set includedUnique race inspired gerotor designEach set hand, machine, and hardness inspected with Blueprinting Report

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Engine Oil Pump Boundary Pumps

Part # P311-23984B1 Manu # MM-OPG-3V Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $233.54

Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish.What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthEach set hand, machine, and hardness inspected with Blueprinting Report

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Engine Oil Pump Boundary Pumps

Part # P311-5DA4A8A Manu # VQ-S1-VHR Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $705.82

The VQ VHR oil pump starts with the Nissan OEM housing, but is assembled with our mirror finished billet oil pump gear. This pump also and comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.This pump has been validated in multiple extreme horsepower naturally aspirated and turbocharged applications. It has been used in the world record holding naturally aspirated 1/4 mile car of Darren Suratt's at 8000 RPM, and in a 8500 RPM 900WHP supercharged VHR.This unit also comes with a preference of relief valve settings for high RPM pressure.All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.Shims:1 Shim +10 PSI2 Shim +20 PSI3 Shim +30 PSI

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Engine Oil Pump Boundary Pumps

Part # P311-51A4C09 Manu # H22-OPG Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $423.55

Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core.After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 13,000 RPM, proven in excess of 1000whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthEach set hand, machine, and hardness inspected with Blueprinting ReportStandard with MartenWear dual stage heat treat for operation over 9,000 RPM.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Engine Oil Pump Boundary Pumps

Part # P311-0248996 Manu # VQ-OPG-VHR Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $423.55

Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish.What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 900whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible coreInner and outer gear set includedUnique race inspired gerotor designSymmetrical tooth profile elemenates the gears weak spot making our gear sets indestructibleEach set hand, machine, and hardness inspected with Blueprinting Report

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Engine Oil Pump Boundary Pumps

Part # P311-1A6B355 Manu # CM-S1-R2 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $381.09

The Coyote Motor oil pump starts with the Ford OEM housing, but is assembled with our billet oil pump gear. This pump also and comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.
All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Boundary Pumps

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2004 Volkswagen Golf Engine Oil Pump