Finish Selecting Your Vehicle

Choose your Submodel for your 2004 Volkswagen Golf

  • Comfortline
  • Europa
  • GL
  • GL TDI
  • GLS
  • GLS TDI
  • GTI
  • GTI 1.8T
  • GTI VR6
  • Trendline

Shop By Brand

The Following brands are available based on your search.

  • ATE
    ATE
  • Autopart International
    Autopart International
  • BBB Industries
    BBB Industries
  • CARQUEST
    CARQUEST
  • Cardone
    Cardone
  • Centric
    Centric
  • Dynamic Friction
    Dynamic Friction
  • Mando
    Mando
  • Pagid
    Pagid
  • Raybestos
    Raybestos
  • TRW
    TRW
  • WBR
    WBR

Showing Products For 2004 Volkswagen Golf Disc Brake Caliper

Below are all the different brands and applications for 2004 Volkswagen Golf Disc Brake Caliper

Showing 1 - 10 of 82 Products for Disc Brake Caliper.

Refine Your Search

TRW
2004 Volkswagen Golf Disc Brake Caliper - Rear Right TRW

P311-5E2F30B    W0133-1794954  New

Qty:
In Stock & Ready to Ship
$142.82
TRW Disc Brake Caliper  Rear Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • with 232mm Brake Disc
Brand: TRW
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2004 - Volkswagen Golf Rear Right
TRW
2004 Volkswagen Golf Disc Brake Caliper - Rear Left TRW

P311-543EEBA    W0133-1898981  New

Qty:
In Stock & Ready to Ship
$137.32
TRW Disc Brake Caliper  Rear Left
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • with 232mm Brake Disc
  • Rear Left
Brand: TRW
Position: Rear Left
Additional Fitment Information:
Vehicle Position
2004 - Volkswagen Golf Rear Left
TRW
2004 Volkswagen Golf Disc Brake Caliper - Rear Right TRW

P311-5E43DED    W0133-1736766  New

Qty:
In Stock & Ready to Ship
$39.00 $164.83
TRW Disc Brake Caliper  Rear Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • with 256mm Brake Disc
Brand: TRW
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2004 - Volkswagen Golf Rear Right
TRW
2004 Volkswagen Golf Disc Brake Caliper - Rear Left TRW

P311-1584A72    W0133-1736765  New

Qty:
In Stock & Ready to Ship
$42.00 $117.73
TRW Disc Brake Caliper  Rear Left
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • with 256mm Brake Disc
Brand: TRW
Position: Rear Left
Additional Fitment Information:
Vehicle Position
2004 - Volkswagen Golf Rear Left
Cardone
2004 Volkswagen Golf Disc Brake Caliper - Rear Right 6 Cyl 2.8L Cardone - Remanufactured Brake Caliper

P311-255B28A    19-B2576  New

Qty:
In Stock & Ready to Ship
$36.90 $73.99
Cardone Disc Brake Caliper  Rear Right
  • Remanufactured Unloaded Caliper w/Bracket
  • without Red Brake Calipers Installation Hardware Included with Metal Piston Supplied with Mounting Bracket
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Anti-Rattle Spring Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.0
    • Bracket Included: Yes
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number:
      • 5612/4
      • Lucas
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Aluminum
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Inverted Flare
    • Inlet Port Size:
      • 0.472
      • 11.98408
    • Inlet Thread Size: M12x1.0
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.394
      • 10.00366
    • Mounting Hole Thread Diameter:
      • 0.394
      • 10.00366
    • Mounting Hole Thread size: M10x1.25
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 1.499
      • 38.0746
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2004 - Volkswagen Golf Rear Right V 6 Cyl 2.8L - 2771
Cardone
2004 Volkswagen Golf Disc Brake Caliper - Rear Left 4 Cyl 1.8L Cardone - Remanufactured Brake Caliper

P311-077EA4A    19-B2577  New

Qty:
In Stock & Ready to Ship
$36.90 $73.99
Cardone Disc Brake Caliper  Rear Left
  • Remanufactured Unloaded Caliper w/Bracket
  • without Red Brake Calipers Installation Hardware Included with Metal Piston Supplied with Mounting Bracket
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Anti-Rattle Spring Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.0
    • Bracket Included: Yes
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number:
      • 5612/4
      • Lucas
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Aluminum
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Inverted Flare
    • Inlet Port Size:
      • 0.472
      • 11.98408
    • Inlet Thread Size: M12x1.0
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.394
      • 10.00366
    • Mounting Hole Thread Diameter:
      • 0.394
      • 10.00366
    • Mounting Hole Thread size: M10x1.25
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 1.499
      • 38.0746
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, indu stry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2004 - Volkswagen Golf Rear Left L 4 Cyl 1.8L - 1781
Cardone
2004 Volkswagen Golf Disc Brake Caliper - Rear Right 4 Cyl 1.9L Cardone - Remanufactured Brake Caliper

P311-255B28A    19-B2576  New

1J0615424D , 1J0615424F , 1J0615424H , 8N0615424D

Qty:
In Stock & Ready to Ship
$36.90 $73.99
Cardone Disc Brake Caliper  Rear Right
  • Remanufactured Unloaded Caliper w/Bracket
  • Installation Hardware Included with Metal Piston Supplied with Mounting Bracket
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Anti-Rattle Spring Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.0
    • Bracket Included: Yes
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number:
      • 5612/4
      • Lucas
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Aluminum
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Inverted Flare
    • Inlet Port Size:
      • 0.472
      • 11.98408
    • Inlet Thread Size: M12x1.0
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.394
      • 10.00366
    • Mounting Hole Thread Diameter:
      • 0.394
      • 10.00366
    • Mounting Hole Thread size: M10x1.25
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 1.499
      • 38.0746
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2004 - Volkswagen Golf Rear Right L 4 Cyl 1.9L 116 1896
Cardone
2004 Volkswagen Golf Disc Brake Caliper - Rear Left 4 Cyl 2.0L Cardone - Remanufactured Brake Caliper

P311-077EA4A    19-B2577  New

1J0615423D , 1J0615423D , 1J0615423G , 8N0615423D

Qty:
In Stock & Ready to Ship
$36.90 $73.99
Cardone Disc Brake Caliper  Rear Left
  • Remanufactured Unloaded Caliper w/Bracket
  • Installation Hardware Included with Metal Piston Supplied with Mounting Bracket
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Anti-Rattle Spring Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.0
    • Bracket Included: Yes
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number:
      • 5612/4
      • Lucas
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Aluminum
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Inverted Flare
    • Inlet Port Size:
      • 0.472
      • 11.98408
    • Inlet Thread Size: M12x1.0
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.394
      • 10.00366
    • Mounting Hole Thread Diameter:
      • 0.394
      • 10.00366
    • Mounting Hole Thread size: M10x1.25
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 1.499
      • 38.0746
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, indu stry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2004 - Volkswagen Golf Rear Left L 4 Cyl 2.0L 121 1984
Cardone
2004 Volkswagen Golf Disc Brake Caliper - Front Right 4 Cyl 1.8L Cardone - Remanufactured Brake Caliper

P311-1FC3353    19-B2015  New

3A0615124 , 3A0615124A

Qty:
In Stock & Ready to Ship
$3.60 $47.17
Cardone Disc Brake Caliper  Front Right
  • Remanufactured Unloaded Caliper w/Bracket
  • Installation Hardware Included with Metal Piston Supplied with Mounting Bracket
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: Yes
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.0
    • Bracket Included: Yes
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number:
      • 301 Ate
      • 732
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Cast Iron
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Inverted Flare
    • Inlet Port Size:
      • 0.394
      • 10.00366
    • Inlet Thread Size: M10x1.5
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.482
      • 12.23798
    • Mounting Hole Thread Diameter:
      • 0.482
      • 12.23798
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 2.122
      • 53.89
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2004 - Volkswagen Golf Front Right L 4 Cyl 1.8L - 1781
Cardone
2004 Volkswagen Golf Disc Brake Caliper - Front Right Cardone - Unloaded w/o Bracket

P311-4A536DC    W0133-1735134  New

Qty:
In Stock & Ready to Ship
$57.00 $94.26
Cardone Disc Brake Caliper  Front Right
  • Cardone/OEF3 Reman
  • with 288mm Brake Disc
  • Unloaded w/o Bracket
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
2004 - Volkswagen Golf Front Right

Showing 1 - 10 of 82 Products for Disc Brake Caliper.