Shop By Brand

The Following brands are available based on your search.

  • Demon Fuel Systems
    Demon Fuel Systems
  • Edelbrock
    Edelbrock
  • Holley
    Holley
  • Lokar
    Lokar
  • Mr Gasket
    Mr Gasket

Showing Products For 2004 Toyota Sienna Carburetor Throttle Cable Bracket

Below are all the different brands and applications for 2004 Toyota Sienna Carburetor Throttle Cable Bracket

Showing 1 - 10 of 30 Products for Carburetor Throttle Cable Bracket.

Refine Your Search

Lokar
Carburetor Throttle Cable Bracket Lokar

P311-3A90D49    TRP-4003  New

Qty:
In Stock & Ready to Ship
$99.75
Lokar Carburetor Throttle Cable Bracket
  • Throttle Cable Bracket And Springs Kit
  • Throttle Cable Bracket And Springs Kit; Fits w/Rochester Tri-Power; Stainless Steel Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Designed For Rochester Tri-Power
    • Bracket Mounts Under Rear Carburetor
    • Cables Operate From Center Carburetor
    • Made In The U.S.A.
    • Lifetime Warranty
  • Stainless brackets mount to rear of Holley, Edelbrock, AFB, Quadrajet, Demon and In-Line dual quads. Stainless bracket and GM designed dual stainless spring are used to mount Lokars throttle cable and kickdown assemblies. Design provides improved clearance on Edelbrock carburetors. Design includes tension screw to prevent brackets from movement under extreme pressure on a kickdown cable, such as with 700-R4 transmission.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-1F6AEBE    SRK-4000  New

Qty:
In Stock & Ready to Ship
$60.50
Lokar Carburetor Throttle Cable Bracket
  • Carburetor Bracket And Return Springs
  • Carburetor Bracket And Return Springs; Fits w/Holley/Edelbrock/AFB/Quadrajet/Demon/In Line Dual Quads; Includes Tension Screw; Stainless Steel Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Provides Improved Clearance On Edelbrock Carbs
    • Made In The U.S.A.
    • Lifetime Warranty
    • Stainless Steel Construction
  • Provides improved clearance on Edelbrock carburetors. Includes tension screw to prevent bracket from movement. Made in the U.S.A. Lifetime warranty.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-044A76F    TCB-40HS  New

Qty:
In Stock & Ready to Ship
$130.82
Lokar Carburetor Throttle Cable Bracket
  • Throttle Cable Bracket
  • Throttle Cable Bracket; Fits w/Holley Sniper; Stainless Steel;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC Machined For 6061-T6 Billet Aluminum
    • Strength And Style
    • Eliminates Bracket Movement
    • Made In The U.S.A.
    • Lifetime Warranty
  • New Throttle and Kickdown Cable Mounting Brackets for FiTech applications. These new brackets allow for a clean and simple integration between Lokar's throttle and kickdown cables and FiTech systems. The FiTech brackets are available in polished or black stainless steel and come with all mounting hardware and return springs. The Sniper brackets are available in polished or black stainless steel and black anodized or brite billet finish.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-0A89B2C    XTCB-40HS1  New

Qty:
In Stock & Ready to Ship
$132.84
Lokar Carburetor Throttle Cable Bracket
  • Throttle Cable Bracket
  • Throttle Cable Bracket; Fits w/Holley Sniper; Black Billet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC Machined For 6061-T6 Billet Aluminum
    • Strength And Style
    • Eliminates Bracket Movement
    • Made In The U.S.A.
    • Lifetime Warranty
  • New Throttle and Kickdown Cable Mounting Brackets for FiTech applications. These new brackets allow for a clean and simple integration between Lokar's throttle and kickdown cables and FiTech systems. The FiTech brackets are available in polished or black stainless steel and come with all mounting hardware and return springs. The Sniper brackets are available in polished or black stainless steel and black anodized or brite billet finish.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-05CCCBF    TCB-40HS1  New

Qty:
In Stock & Ready to Ship
$132.84
Lokar Carburetor Throttle Cable Bracket
  • Throttle Cable Bracket
  • Throttle Cable Bracket; Fits w/Holley Sniper; Brite Billet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC Machined For 6061-T6 Billet Aluminum
    • Strength And Style
    • Eliminates Bracket Movement
    • Made In The U.S.A.
    • Lifetime Warranty
  • New Throttle and Kickdown Cable Mounting Brackets for FiTech applications. These new brackets allow for a clean and simple integration between Lokar's throttle and kickdown cables and FiTech systems. The FiTech brackets are available in polished or black stainless steel and come with all mounting hardware and return springs. The Sniper brackets are available in polished or black stainless steel and black anodized or brite billet finish.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-503416B    1010128  New

Qty:
In Stock & Ready to Ship
$370.84
Lokar Carburetor Throttle Cable Bracket
  • Push/Pull Throttle Cable Mounting Bracket And Spring Return Kit
  • Push/Pull Throttle Cable Mounting Bracket And Spring Return Kit; 4500 Carb; Open Plenum; Includes 2 Brackets/Return Springs/Cable Mount/Spring Tensioner/Throttle Plate/Hrdw; Black;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Scoop Tray Studs And Stainless Hardware Incl.
    • Return Springs w/Dual Wound Ends For Safety
    • Eliminates Single Hook Ends Opening Up
    • Creates Less Strain On Throttle Cable
    • Eliminates Typical Top Mount Flopping
    • Can Function Without Throttle Stop
    • Made In The U.S.A.
    • Lifetime Warranty
  • Scoop tray studs and stainless hardware included. Return springs with dual wound ends for safety. Eliminates single hook ends opening up. Creates less strain on throttle cable. Eliminates typical top mount flopping. Can function without throttle stop. Made in the U.S.A. Lifetime warranty.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-13FC6F0    1010118  New

Qty:
In Stock & Ready to Ship
$370.84
Lokar Carburetor Throttle Cable Bracket
  • Push/Pull Throttle Cable Mounting Bracket And Spring Return Kit
  • Push/Pull Throttle Cable Mounting Bracket And Spring Return Kit; 4500 Carburetor; 4Hole Plenum; Includes 2Brackets/ReturnSprings/CableMount/SpringTensioner/ThrottlePlate/Hrdw; Black;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Scoop Tray Studs And Stainless Hardware Incl.
    • Return Springs w/Dual Wound Ends For Safety
    • Eliminates Single Hook Ends Opening Up
    • Creates Less Strain On Throttle Cable
    • Eliminates Typical Top Mount Flopping
    • Can Function Without Throttle Stop
    • Made In The U.S.A.
    • Lifetime Warranty
  • Scoop tray studs and stainless hardware included. Return springs with dual wound ends for safety. Eliminates single hook ends opening up. Creates less strain on throttle cable. Eliminates typical top mount flopping. Can function without throttle stop. Made in the U.S.A. Lifetime warranty.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-2DDBED1    SRK-4001  New

Qty:
In Stock & Ready to Ship
$32.71
Lokar Carburetor Throttle Cable Bracket
  • Carburetor Bracket
  • Carburetor Bracket; Fits w/Holley/Edelbrock/AFB/Quadrajet/Demon/In Line Dual Quads; Includes Tension Screw; Stainless Steel Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Provides Improved Clearance On Edelbrock Carbs
    • Made In The U.S.A.
    • Lifetime Warranty
    • Stainless Steel Construction
  • Provides improved clearance for Edelbrock carburetors. Made in U.S.A. Lifetime warranty.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-2A320B7    TCB-40FIT  New

Qty:
In Stock & Ready to Ship
$130.82
Lokar Carburetor Throttle Cable Bracket
  • Throttle Cable Bracket
  • Throttle Cable Bracket; Fits w/Fitech EFI; Stainless Steel;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • CNC Machined For 6061-T6 Billet Aluminum
    • Strength And Style
    • Eliminates Bracket Movement
    • Made In The U.S.A.
    • Lifetime Warranty
  • New Throttle and Kickdown Cable Mounting Brackets for FiTech applications. These new brackets allow for a clean and simple integration between Lokar's throttle and kickdown cables and FiTech systems. The FiTech brackets are available in polished or black stainless steel and come with all mounting hardware and return springs. The Sniper brackets are available in polished or black stainless steel and black anodized or brite billet finish.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Carburetor Throttle Cable Bracket Lokar

P311-321CE94    XSRK-4001  New

Qty:
In Stock & Ready to Ship
$37.61
Lokar Carburetor Throttle Cable Bracket
  • Carburetor Bracket
  • Carburetor Bracket; Fits w/Holley/Edelbrock/AFB/Quadrajet/Demon/In Line Dual Quads; Includes Tension Screw; Stainless Steel; Black Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Provides Improved Clearance On Edelbrock Carbs
    • Made In The U.S.A.
    • Lifetime Warranty
    • Stainless Steel Construction
  • Stainless brackets mount to rear of Holley, Edelbrock, AFB, Quadrajet, Demon and In-Line dual quads. Stainless bracket and GM designed dual stainless spring are used to mount Lokars throttle cable and kickdown assemblies. Design provides improved clearance on Edelbrock carburetors. Design includes tension screw to prevent brackets from movement under extreme pressure on a kickdown cable, such as with 700-R4 transmission.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 30 Products for Carburetor Throttle Cable Bracket.