Finish Selecting Your Vehicle

Choose your Engine for your 2004 Suzuki Forenza

  • 4 Cyl 2.0L

Shop By Brand

The Following brands are available based on your search.

  • Atlantic Automotive Enterprise
    Atlantic Automotive Enterprise
  • BBB Industries
    BBB Industries
  • Borgeson
    Borgeson
  • Cardone
    Cardone
  • Mapco
    Mapco
  • Maval
    Maval
  • Tuff Stuff Performance Accessories
    Tuff Stuff Performance Accessories

Showing Products For 2004 Suzuki Forenza Power Steering Pump

Below are all the different brands and applications for 2004 Suzuki Forenza Power Steering Pump

Showing 1 - 10 of 28 Products for Power Steering Pump.

Refine Your Search

Maval
2004 Suzuki Forenza Power Steering Pump Maval - w/o Pulley - with Core

P311-548B957    W0133-1937356  Remanufactured

Qty:
In Stock & Ready to Ship
$42.00 $233.55
Maval Power Steering Pump
  • Remanufactured
  • with HV code on the return hose nipple.
  • w/o Pulley
  • w/o Pulley - with Core
Brand: Maval
Additional Fitment Information:
Vehicle
2004 - Suzuki Forenza
Cardone
2004 Suzuki Forenza Power Steering Pump Cardone - Power Steering Pump

P311-4B82253    20-807  Remanufactured

4911085Z00 , 4911085Z03

Qty:
In Stock & Ready to Ship
$10.80 $126.61
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
2004 - Suzuki Forenza
Mapco
2004 Suzuki Forenza Power Steering Pump Mapco

P311-1AF2DAB    97170M  New

20-807 , 5621V

Qty:
In Stock & Ready to Ship
$35.00 $144.10
  • Power Steering Pump
  • (All Models) Pulley needs to be transferred with proper pulley removal/install toll.
Brand: Mapco
Additional Fitment Information:
Vehicle
2004 - Suzuki Forenza
Mapco
2004 Suzuki Forenza Power Steering Pump - Front Mapco

P311-082A854    97211M  New

20-805 , 49110-85Z02

Qty:
In Stock & Ready to Ship
$50.00 $152.11
  • Power Steering Pump
  • w/"MP" Code Pulley needs to be transferred with proper pulley removal/install toll.
Brand: Mapco
Position: Front
Additional Fitment Information:
Vehicle Position
2004 - Suzuki Forenza Front
BBB Industries
2004 Suzuki Forenza Power Steering Pump BBB Industries - New Power Steering Pump

P311-4F3FE36    N733-0145  New

19318743

Qty:
In Stock & Ready to Ship
$166.38
BBB Industries Power Steering Pump
  • w/o Reservoir
  • New Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle
2004 - Suzuki Forenza
Atlantic Automotive Enterprise
2004 Suzuki Forenza Power Steering Pump 4 Cyl 2.0L Atlantic Automotive Enterprise - New Power Steering Pump

P311-2811B90    5621VN  New

Qty:
In Stock & Ready to Ship
$198.85
Atlantic Automotive Enterprise Power Steering Pump
  • AAE New Hydraulic Power Steering Pump 100% Tested
  • New, w/Pulley, w/Sensor
  • New Power Steering Pump
  • Product Attributes:
    • Application Type: Application Specific
    • Bullet Point 1: Each Unit Is 100% Hydraulically Tested Under Load In The Usa.
    • Bullet Point 2: Pulley Included And Preinstalled.
    • Bullet Point 3: Sensor Included And Preinstalled.
    • Bullet Point 4: Upgraded Shaft Is Heat Treated To Prevent Premature Failure.
    • Bullet Point 5: Aae New P/s Pumps Are Sold Without A Core Charge.
    • Link to Manufacturer Page: Www.aaesteering.com
    • Warranty Distance: 24000
    • Warranty Distance UOM: Mi
    • Warranty Time UOM: Mo
  • AAE New Hydraulic Power Steering Pumps are manufactured with OE quality components. Each unit undergoes thorough inspection and testing procedures to ensure OE operation and fitment. Prior to shipment, each unit is 100% tested in the USA and held to the strictest standards in the industry. CRP goes beyond original equipment specifications to improve the performance of every part we offer. To safeguard long life, as well as OE performance and operation, be sure to flush and fill the steering system with an OE approved power steering fluid.
Brand: Atlantic Automotive Enterprise
Additional Fitment Information:
Vehicle Block Engine CID CC
2004 - Suzuki Forenza L 4 Cyl 2.0L 122 1998
Mapco
Power Steering Pump Mapco

P311-3F7F6AE    97240M  New

Qty:
In Stock & Ready to Ship
$150.00 $136.09
  • Power Steering Pump

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mapco
Additional Fitment Information:
Vehicle
Tuff Stuff Performance Accessories
Power Steering Pump Tuff Stuff Performance Accessories

P311-451672B    6170AL-2  New

Qty:
In Stock & Ready to Ship
$180.09
Tuff Stuff Performance Accessories Power Steering Pump
  • Type II Alum. Power Steering Pump
  • Type II Alum. Power Steering Pump; AN-6 And AN-10 Fitting; M8x1.25 Threaded Hole Mtg; Btm Pressure Port; For StreetRods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
  • Features:
    • Compact Size Ideal For Tight Applications
    • Requires A Press Fit Pulley Not Included
    • 1200 PSI Rating
    • 3 GPM Flow
    • Bottom Pressure Port
    • Clockwise Rotation Only
    • 100% New Components
    • Made In The U.S.A.
  • Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Tuff Stuff Performance Accessories
Additional Fitment Information:
Vehicle
Tuff Stuff Performance Accessories
Power Steering Pump Tuff Stuff Performance Accessories

P311-2AA7DBB    6174A  New

Qty:
In Stock & Ready to Ship
$229.90
Tuff Stuff Performance Accessories Power Steering Pump
  • Saginaw Style Power Steering Pump
  • Saginaw Style Power Steering Pump; Univ. Fit; 5/8 in. Keyed Shaft; 850 PSI; 5/8-18 SAE Pressure Fittings; 3/8 in.-16 Mtg. Holes; Chrome;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
  • Features:
    • Includes Reservoir/Pump Assembly/Billet Cap/Dipstick/Hardware
    • Requires A Bolt On Pulley Which Is Not Included
    • Clockwise Rotation Only
    • 850 PSI Rating
    • 2 GPM Flow
    • 100% New Components
    • Made In The U.S.A.
  • Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Tuff Stuff Performance Accessories
Additional Fitment Information:
Vehicle
Tuff Stuff Performance Accessories
Power Steering Pump Tuff Stuff Performance Accessories

P311-2D8BCEB    6170AL-1  New

Qty:
In Stock & Ready to Ship
$159.22
Tuff Stuff Performance Accessories Power Steering Pump
  • Type II Alum. Power Steering Pump
  • Type II Alum. Power Steering Pump; GM PressureSlipFitting; M8x1.25 Threaded Hole Mtg; Btm PressurePort; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
  • Features:
    • Compact Size Ideal For Tight Applications
    • Requires A Press Fit Pulley Not Included
    • 1200 PSI Rating
    • 3 GPM Flow
    • Bottom Pressure Port
    • 100% New Components
    • Made In The U.S.A.
    • Clockwise Rotation Only
  • Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Tuff Stuff Performance Accessories
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 28 Products for Power Steering Pump.