Finish Selecting Your Vehicle

Choose your Submodel for your 2004 Ford Taurus

  • LX
  • SE
  • SEL
  • SES

Shop By Brand

The Following brands are available based on your search.

  • Atlantic Automotive Enterprise
    Atlantic Automotive Enterprise
  • BBB Industries
    BBB Industries
  • Borgeson
    Borgeson
  • CARQUEST
    CARQUEST
  • Cardone
    Cardone
  • Mapco
    Mapco
  • Motorcraft
    Motorcraft
  • Tuff Stuff Performance Accessories
    Tuff Stuff Performance Accessories

Showing Products For 2004 Ford Taurus Power Steering Pump

Below are all the different brands and applications for 2004 Ford Taurus Power Steering Pump

Showing 1 - 10 of 37 Products for Power Steering Pump.

Refine Your Search

Cardone
2004 Ford Taurus Power Steering Pump Cardone - Power Steering Pump

P311-5255FC0    20-273  Remanufactured

1F1Z3A674AARM , 1F1Z3A674BA , F6DZ3A674A , YF1Z3A674ABRM

Qty:
In Stock & Ready to Ship
$23.40 $61.40
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Cylinder Head Type
2004 - Ford Taurus DOHC
Cardone
2004 Ford Taurus Power Steering Pump Cardone - Power Steering Pump

P311-5B85B2B    20-253  Remanufactured

2F1Z3A674AARM , 5F1Z3A674A , YF1Z3A674DBRM

Qty:
In Stock & Ready to Ship
$9.90 $53.88
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Cylinder Head Type
2004 - Ford Taurus OHV
BBB Industries
2004 Ford Taurus Power Steering Pump 6 Cyl 3.0L BBB Industries - Reman Power Steering Pump

P311-462BC04    711-0108  Remanufactured

19318536 , 5F1Z-3A674-A

Qty:
In Stock & Ready to Ship
$9.00 $47.00
BBB Industries Power Steering Pump
  • w/o Reservoir
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Reservoir
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
    • Reservoir Included: No
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Valves Block Engine CID CC
2004 - Ford Taurus 12 V 6 Cyl 3.0L 182 2986
BBB Industries
2004 Ford Taurus Power Steering Pump 6 Cyl 3.0L BBB Industries - Reman Power Steering Pump

P311-1189C9B    711-2138  Remanufactured

19319742 , 2F1Z-3A674-AA , 5F1Z-3A674-A , YF1Z-3A674-DB , ZZL0-32-690 , ZZM0-32-600 , ZZP0-32-600 , ZZP0-32-600A , ZZP0-32-600B

Qty:
In Stock & Ready to Ship
$27.00 $48.98
BBB Industries Power Steering Pump
  • with Reservoir; ** Reservoir Units Are Recommended Replacement **
  • Reman Power Steering Pump
  • Product Attributes:
    • Inlet Attachment Type: Reservoir
    • Inlet Diameter: 0.376
    • Inlet Size: 0.376
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
    • Reservoir Included: Yes
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Valves Block Engine CID CC
2004 - Ford Taurus 12 V 6 Cyl 3.0L 182 2986
BBB Industries
2004 Ford Taurus Power Steering Pump 6 Cyl 3.0L BBB Industries - Reman Power Steering Pump

P311-45FD1D3    712-0106  Remanufactured

19318553

Qty:
In Stock & Ready to Ship
$12.00 $54.01
BBB Industries Power Steering Pump
  • w/o Reservoir w/o Pulley
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Pipe
    • Inlet Diameter: 0.711
    • Inlet Size: 0.711
    • Inlet Thread Size: M6x1.0
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Cap Included: No
    • Reservoir Included: No
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Valves Block Engine CID CC
2004 - Ford Taurus 24 V 6 Cyl 3.0L 181 2968
BBB Industries
2004 Ford Taurus Power Steering Pump 6 Cyl 3.0L BBB Industries - Reman Power Steering Pump

P311-4B2FCAE    712-0106A1  Remanufactured

19382793

Qty:
In Stock & Ready to Ship
$57.00 $104.02
BBB Industries Power Steering Pump
  • w/o Reservoir with Pulley
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Pipe
    • Inlet Diameter: 0.711
    • Inlet Size: 0.711
    • Inlet Thread Size: M6x1.0
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Belt Type: Serpentine
    • Pulley Included: Yes
    • Remote Reservoir: Yes
    • Reservoir Cap Included: No
    • Reservoir Included: No
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Valves Block Engine CID CC
2004 - Ford Taurus 24 V 6 Cyl 3.0L 181 2968
Atlantic Automotive Enterprise
2004 Ford Taurus Power Steering Pump 6 Cyl 3.0L Atlantic Automotive Enterprise - New Power Steering Pump

P311-487882B    6383N  New

Qty:
In Stock & Ready to Ship
$163.59
  • AAE New Hydraulic Power Steering Pump 100% Tested
  • New, w/OHV, w/o Pulley, w/Reservoir
  • New Power Steering Pump
  • Product Attributes:
    • Application Type: Application Specific
    • Bullet Point 1: Reservoir Included And Preinstalled.
    • Bullet Point 2: Each Unit Is 100% Hydraulically Tested Under Load In The Usa.
    • Bullet Point 3: Aae New P/s Pumps Are Sold Without A Core Charge.
    • Bullet Point 4: Aae Pumps Are Engineered To Meet Or Exceed Oe Specifications In Performance, Fit And Function.
    • Bullet Point 5: It Is Highly Recommended To Replace Steering Fluid Reservoir When Replacing Pump. Clogged Reservoirs Can Starve The Replacement Pump.
    • Link to Manufacturer Page: Www.aaesteering.com
    • Warranty Distance: 24000
    • Warranty Distance UOM: Mi
    • Warranty Time UOM: Mo
  • AAE New Hydraulic Power Steering Pumps are manufactured with OE quality components. Each unit undergoes thorough inspection and testing procedures to ensure OE operation and fitment. Prior to shipment, each unit is 100% tested in the USA and held to the strictest standards in the industry. CRP goes beyond original equipment specifications to improve the performance of every part we offer. To safeguard long life, as well as OE performance and operation, be sure to flush and fill the steering system with an OE approved power steering fluid.
Brand: Atlantic Automotive Enterprise
Additional Fitment Information:
Vehicle Block Engine CID CC
2004 - Ford Taurus V 6 Cyl 3.0L 182 2986
Cardone
2004 Ford Taurus Power Steering Pump Cardone - Power Steering Pump

P311-1730F8F    20-7256  Remanufactured

2F1Z3A674AARM , 5F1Z3A674A , YF1Z3A674DBRM , ZZL032690 , ZZM032600 , ZZP032600 , ZZP032600A , ZZP032600B

Qty:
In Stock & Ready to Ship
$25.20 $56.81
Cardone Power Steering Pump
  • Reservoir Included In-Line Filter available without Aftermarket Filtration Improvement For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: Yes
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Cylinder Head Type
2004 - Ford Taurus OHV
Cardone
2004 Ford Taurus Power Steering Pump Cardone - Power Steering Pump

P311-2348CA6    96-273  New

1F1Z3A674AARM , 1F1Z3A674BA , 5F9Z3A674AA , 6F9Z3A696A , 6F9Z3A696B , 6F9Z3A696C , F6DZ3A674A , YF1Z3A674AARM , YF1Z3A674ABRM

Qty:
In Stock & Ready to Ship
$129.48
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Seal Kit
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • Manufactured With Premium Grade, High-temperature Seals For Added Durability Under All Driving Conditions.
      • Meets Or Exceeds O.e. Performance.
      • Precise Bushing Alignment Prevents Premature Shaft And Seal Wear, Significantly Reducing Noise And Vibration.
      • Rigorous Computer Load Testing Ensures Optimal Performance And Durability By Incorporating Real-world Parameters During The Test Cycle.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: New
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle Cylinder Head Type
2004 - Ford Taurus DOHC
Cardone
2004 Ford Taurus Power Steering Pump Cardone - w/Reservoir

P311-5996154    W0133-2538130  Remanufactured

Qty:
In Stock & Ready to Ship
$48.00 $121.05
Cardone Power Steering Pump
  • Remanufactured
  • w/Reservoir
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel Cylinder Head Type
2004 - Ford Taurus SES OHV

Showing 1 - 10 of 37 Products for Power Steering Pump.