Finish Selecting Your Vehicle

Choose your Engine for your 2003 Land Rover Discovery

  • 8 Cyl 4.6L

Shop By Brand

The Following brands are available based on your search.

  • Bosch
    Bosch
  • Delphi
    Delphi
  • Holley
    Holley
  • URO Parts
    URO Parts

Showing Products For 2003 Land Rover Discovery Fuel Pump Module Assembly

Below are all the different brands and applications for 2003 Land Rover Discovery Fuel Pump Module Assembly

Showing 1 - 10 of 24 Products for Fuel Pump Module Assembly.

Refine Your Search

Bosch
2003 Land Rover Discovery Fuel Pump Module Assembly Bosch - with Sending Unit

P311-06F83DB    W0133-1597574  New

Qty:
In Stock & Ready to Ship
$336.91
Bosch Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • w/o Secondary Air Injection
  • Includes Sending Unit. Tank Seal Serviced Separately.
  • with Sending Unit
Brand: Bosch
Additional Fitment Information:
Vehicle
2003 - Land Rover Discovery
Bosch
2003 Land Rover Discovery Fuel Pump Module Assembly Bosch - with Sending Unit

P311-2EF4E66    W0133-1597624  New

Qty:
In Stock & Ready to Ship
$345.39
Bosch Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • with Secondary Air Injection
  • Includes Sending Unit. Tank Seal Serviced Separately.
  • with Sending Unit
Brand: Bosch
Additional Fitment Information:
Vehicle
2003 - Land Rover Discovery
URO Parts
2003 Land Rover Discovery Fuel Pump Module Assembly URO Parts

P311-0BCFF7B    WFX101060  New

1521022 , 69 339 , 69339 , SP5075M , URO-009099 , WFX000130 , WFX101060

Qty:
In Stock & Ready to Ship
$152.92
URO Parts Fuel Pump Module Assembly
  • Electric Fuel Pump Assembly
  • with Secondary Air Injection
  • Product Attributes:
    • : New
    • Connector Gender: Male
    • Fuel Sending Unit Included: Yes
    • Inlet Type: Quick Disconnect
    • Maximum Pressure: 45
    • Mounting Hardware Included: No
    • Outlet Outside Diameter: .3125
    • Pump Type: Electric
    • Strainer Included: No
    • Guaranteed fitment
    • Efficient impeller design maximizes fuel flow while minimizing current draw
    • Precision armature bearings for quiet operation and reduced vibration
    • Low-resistance motor brushes for durability and efficiency
    • Durable high-quality housing materials
    • Factory tested for proper operation
    • 24 Month Unlimited Mileage Warranty
Brand: URO Parts
Additional Fitment Information:
Vehicle
2003 - Land Rover Discovery
Bosch
2003 Land Rover Discovery Fuel Pump Module Assembly 8 Cyl 4.6L Bosch - Fuel Pump Module Assembly (New)

P311-348B52C    69340  New

WFX101070

Qty:
In Stock & Ready to Ship
$227.51
  • Bosch Fuel Pump Module Assembly
  • For vehicles without secondary air pump
  • Fuel Pump Module Assembly (New)
  • Product Attributes:
    • Electric Or Mechanical: Electric
    • Gaskets Included (Fuel Pump): No
    • In-Line Pump: N
    • Mounting Hardware Included: No
    • Negative Ground: No
    • Package Contents: 1 Module Assembly
    • Prefiltro usado con bomba: Yes
    • Prop 65 Warning Label Required?: No
    • Pump Only Or Module: Module
  • Features:
    • Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
    • Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
    • Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
    • Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
    • All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
  • Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.
Brand: Bosch
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Land Rover Discovery V 8 Cyl 4.6L 278 4554
Bosch
2003 Land Rover Discovery Fuel Pump Module Assembly Bosch - with Sending Unit

P311-54A22F0    W0133-2881650  New

Qty:
In Stock & Ready to Ship
$329.68
Bosch Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • w/o Secondary Air Injection
  • with Sending Unit
Brand: Bosch
Additional Fitment Information:
Vehicle
2003 - Land Rover Discovery
Delphi
2003 Land Rover Discovery Fuel Pump Module Assembly 8 Cyl 4.6L Delphi

P311-44D43EA    FG1852  New

69340 , A30249 , DFG1852 , E8478M , SP5097M , WFX 101070

Qty:
In Stock & Ready to Ship
$618.27
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Without Air Injection System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 31
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 123.0
    • Outlet Outside Diameter: 0.375
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 245.0
    • Resistance Ohms Full: 15.0
    • Strainer Included: Yes
    • System Pressure: 51 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Pin
    • Vapor Pressure Sensor: Yes
    • Voltage: 12.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Land Rover Discovery V 8 Cyl 4.6L 278 4554
Delphi
2003 Land Rover Discovery Fuel Pump Module Assembly 8 Cyl 4.6L Delphi

P311-0FA695E    FG1718  New

69339 , A46515 , DFG1718 , E8478M , SP5075M , WFX 101060 , WFX101060

Qty:
In Stock & Ready to Ship
$356.17
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Air Injection System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 10
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Outlet Outside Diameter: 0.313
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 244.0
    • Resistance Ohms Full: 15.0
    • Strainer Included: Yes
    • System Pressure: 51 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Pin
    • Vapor Pressure Sensor: No
    • Voltage: 12.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Land Rover Discovery V 8 Cyl 4.6L 278 4554
Delphi
Fuel Pump Module Assembly Delphi

P311-1AC5F71    FG1483  New

3924710C1 , EFG1483

Qty:
In Stock & Ready to Ship
$255.27
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 46
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 80.0
    • Notes: Used On 2012 F64 Navistar
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 54 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Delphi
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-473F3E1    12-131  New

Qty:
In Stock & Ready to Ship
$705.55
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Returnless; Installs In Any Tank From 7.25 in. To 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-3FEFDF7    12-130  New

Qty:
In Stock & Ready to Ship
$851.97
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 24 Products for Fuel Pump Module Assembly.