Finish Selecting Your Vehicle

Choose your Engine for your 2003 Kia Sedona

  • 6 Cyl 3.5L

Shop By Brand

The Following brands are available based on your search.

  • Accel
    Accel
  • Beck Arnley
    Beck Arnley
  • Denso
    Denso
  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Karlyn STI
    Karlyn STI
  • MSD
    MSD
  • Mallory
    Mallory
  • NGK
    NGK
  • Pertronix
    Pertronix
  • Prenco
    Prenco
  • Standard Wires
    Standard Wires
  • Taylor Cable
    Taylor Cable
  • Walker Products
    Walker Products

Showing Products For 2003 Kia Sedona Spark Plug Wire Set

Below are all the different brands and applications for 2003 Kia Sedona Spark Plug Wire Set

Showing 11 - 20 of 131 Products for Spark Plug Wire Set.

Refine Your Search

Mallory
Spark Plug Wire Set Mallory

P311-206ADCD    947C  New

Qty:
In Stock & Ready to Ship
$187.59
Mallory Spark Plug Wire Set
  • Spark Plug Wire Set
  • Spark Plug Wire Set; Universal V8; Pro Sidewinder Plug; Ceramic Boot; 135 Degree; 240-360 Ohms/ft. Resistance; Red;
  • Product Attributes:
    • Boot Angle: 135 Degree
    • Boot Material: Ceramic
    • Boot Temperature Rating: 2000 Degrees
    • Boot Type: 135 Degree
    • Core Type: Nicr Alloy
    • Engine: 8 Cylinder
    • Resistance: 240-360 Ohms Per Ft.
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Wire Diameter: 8mm
  • Features:
    • Withstands Temperatures Up To 2000 Degrees Fahrenheit
    • 8mm Red Silicon Jacket Withstands Temps Up To 550 Degrees F
    • Spiral Round NiCR Core For Low Resistance/High Noise Suppression
    • HEI Type/Socket Type Distributor Ends
    • Custom Build To Specific Length For Neat/Clean Install/Routing
  • Burning spark plug boots in high heat applications is a thing of the past with Mallorys high temp ceramic boot spark plug wires. The ceramic boot is capable of withstanding temps up to 2,000°F making them ideal for applications with close tolerance headers and any other application where boot failure is an issue.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mallory
Additional Fitment Information:
Vehicle
Mallory
Spark Plug Wire Set Mallory

P311-1BAAE62    937C  New

Qty:
In Stock & Ready to Ship
$187.59
Mallory Spark Plug Wire Set
  • Spark Plug Wire Set
  • Spark Plug Wire Set; Universal V8; Pro Sidewinder Plug; Ceramic Boot; 90 Degree; 240-360 Ohms/ft. Resistance; Red;
  • Product Attributes:
    • Boot Angle: 90 Degree
    • Boot Material: Ceramic
    • Boot Temperature Rating: 2000 Degrees
    • Boot Type: 90 Degree
    • Core Type: Nicr Alloy
    • Engine: 8 Cylinder
    • Resistance: 240-360 Ohms Per Ft.
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Wire Diameter: 8mm
  • Features:
    • Withstands Temperatures Up To 2000 Degrees Fahrenheit
    • 8mm Red Silicon Jacket Withstands Temps Up To 550 Degrees F
    • Spiral Round NiCR Core For Low Resistance/High Noise Suppression
    • HEI Type/Socket Type Distributor Ends
    • Custom Build To Specific Length For Neat/Clean Install/Routing
  • Burning spark plug boots in high heat applications is a thing of the past with Mallorys high temp ceramic boot spark plug wires. The ceramic boot is capable of withstanding temps up to 2,000°F making them ideal for applications with close tolerance headers and any other application where boot failure is an issue.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mallory
Additional Fitment Information:
Vehicle
MSD
Spark Plug Wire Set MSD

P311-5906216    30479  New

Qty:
In Stock & Ready to Ship
$185.21
MSD Spark Plug Wire Set
  • Custom Spark Plug Wire Set
  • Custom Spark Plug Wire Set; 8.5mm; Specifically For Small Block Chevy Race Engines Equipped w/Headers Or An MSD Distributor; For Use w/PN[8541] Cap;
  • Product Attributes:
    • Boot Type: 90 Degree
    • Engine: Chevy Small Block
    • Engine Make/Size: Chevy Small Block
    • WARNING CA Proposition 65: No
  • Features:
    • Less than 50 ohms per foot for superior spark
    • Ferro-magnetic impregnated core creates an effective EMI choke
    • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
    • For high EMI suppression
    • Conductor core features Dupont Kevlar material
    • Proprietary compound sleeves for resistance to high heat/abrasion
  • The MSD 8.5mm Super Conductor is the ultimate performance wire! Its extremely low-resistance combined with the ability to suppress Electro Magnetic Interference is a combination that defies the common laws of physics. Less resistance means more energy is going to make it to the spark plug to ignite the air/fuel mixture. The Super Conductor uses a copper alloy conductor resulting in less than 50 ohms per foot of wire! This ensures that the most energy possible makes it to the spark plug. By helically winding the conductor around a special core, we are able to produce a highly effective choke to keep the EMI inside the wire and away from other electronics. This combination is encased in a heavy duty sleeve that will withstand abrasion and high temperatures. Cap off each end with our Dual Crimp Terminals and you have the best wire available.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Spark Plug Wire Set MSD

P311-0618E92    30829  New

Qty:
In Stock & Ready to Ship
$185.21
MSD Spark Plug Wire Set
  • Custom Spark Plug Wire Set
  • Custom Spark Plug Wire Set; 8.5mm; Specifically For Big Block Chevy Race Engines Equipped w/Headers Or An MSD Distributor; For Use w/PN[8541] Cap;
  • Product Attributes:
    • Boot Type: 90 Degree
    • Engine: Chevy Big Block
    • Engine Make/Size: Chevy Big Block
    • WARNING CA Proposition 65: No
  • Features:
    • Less than 50 ohms per foot for superior spark
    • Ferro-magnetic impregnated core creates an effective EMI choke
    • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
    • For high EMI suppression
    • Conductor core features Dupont Kevlar material
    • Proprietary compound sleeves for resistance to high heat/abrasion
  • The MSD 8.5mm Super Conductor is the ultimate performance wire! Its extremely low-resistance combined with the ability to suppress Electro Magnetic Interference is a combination that defies the common laws of physics. Less resistance means more energy is going to make it to the spark plug to ignite the air/fuel mixture. The Super Conductor uses a copper alloy conductor resulting in less than 50 ohms per foot of wire! This ensures that the most energy possible makes it to the spark plug. By helically winding the conductor around a special core, we are able to produce a highly effective choke to keep the EMI inside the wire and away from other electronics. This combination is encased in a heavy duty sleeve that will withstand abrasion and high temperatures. Cap off each end with our Dual Crimp Terminals and you have the best wire available.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Taylor Cable
Spark Plug Wire Set Taylor Cable

P311-42FE79E    79651  New

Qty:
In Stock & Ready to Ship
$175.45
Taylor Cable Spark Plug Wire Set
  • 409 Spiro-Pro 10.4mm Ignition Wire Set
  • 409 Spiro-Pro 10.4mm Ignition Wire Set; Spiro-Wound; Universal Fit; 90 deg. Plug Boot; 8 cyl. Blue;
  • Product Attributes:
    • Boot Angle: 90 Degree
    • Boot Type: Spiro Wound
    • Engine: Universal 8 Cylinder
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Cancer And Reproductive
  • Features:
    • 10.4mm Diameter
    • 100 percent Pure Silicone Ignition Wire
    • 350 Ohm Per Foot Resistance
    • Heat Treated Fiberglass Braid
    • Spiro-Wound Core
    • Eliminates Radio Frequency Interference
    • Blue
  • 10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Taylor Cable
Additional Fitment Information:
Vehicle
Taylor Cable
Spark Plug Wire Set Taylor Cable

P311-484E564    79055  New

Qty:
In Stock & Ready to Ship
$175.45
Taylor Cable Spark Plug Wire Set
  • 409 Spiro-Pro 10.4mm Ignition Wire Set
  • 409 Spiro-Pro 10.4mm Ignition Wire Set; Spiro-Wound; Universal Fit; 180 deg.; 8 cyl.; Black;
  • Product Attributes:
    • Boot Angle: 180 Degree
    • Boot Type: Spiro Wound
    • Engine: Universal 8 Cylinder
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Cancer And Reproductive
  • Features:
    • 10.4mm Diameter
    • 100 percent Pure Silicone Ignition Wire
    • 350 Ohm Per Foot Resistance
    • Heat Treated Fiberglass Braid
    • Spiro-Wound Core
    • Eliminates Radio Frequency Interference
    • Black
  • 10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Taylor Cable
Additional Fitment Information:
Vehicle
Taylor Cable
Spark Plug Wire Set Taylor Cable

P311-0D1627B    79251  New

Qty:
In Stock & Ready to Ship
$175.45
Taylor Cable Spark Plug Wire Set
  • 409 Spiro-Pro 10.4mm Ignition Wire Set
  • 409 Spiro-Pro 10.4mm Ignition Wire Set; Spiro-Wound; 90 deg.; Universal Fit; 8 cyl.; Red;
  • Product Attributes:
    • Boot Angle: 90 Degree
    • Boot Type: Spiro Wound
    • Engine: Universal 8 Cylinder
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Cancer And Reproductive
  • Features:
    • 10.4mm Diameter
    • 100 percent Pure Silicone Ignition Wire
    • 350 Ohm Per Foot Resistance
    • Heat Treated Fiberglass Braid
    • Spiro-Wound Core
    • Eliminates Radio Frequency Interference
    • Red
  • 10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Taylor Cable
Additional Fitment Information:
Vehicle
Taylor Cable
Spark Plug Wire Set Taylor Cable

P311-01A9BCC    79255  New

Qty:
In Stock & Ready to Ship
$175.45
Taylor Cable Spark Plug Wire Set
  • 409 Spiro-Pro 10.4mm Ignition Wire Set
  • 409 Spiro-Pro 10.4mm Ignition Wire Set; Spiro-Wound; Universal Fit; 180 deg.; 8 cyl.; Red;
  • Product Attributes:
    • Boot Angle: 180 Degree
    • Boot Type: Spiro Wound
    • Engine: Universal 8 Cylinder
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Cancer And Reproductive
  • Features:
    • 10.4mm Diameter
    • 100 percent Pure Silicone Ignition Wire
    • 350 Ohm Per Foot Resistance
    • Heat Treated Fiberglass Braid
    • Spiro-Wound Core
    • Eliminates Radio Frequency Interference
    • Red
  • 10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Taylor Cable
Additional Fitment Information:
Vehicle
MSD
Spark Plug Wire Set MSD

P311-0AF69E9    31299  New

Qty:
In Stock & Ready to Ship
$167.14
MSD Spark Plug Wire Set
  • 8.5mm Super Conductor Wire Set
  • 8.5mm Super Conductor Wire Set; Fits Big Block Chevy w/Low Profile Distributor; Red;
  • Product Attributes:
    • Boot Type: 90 Degree
    • Engine: Chevy Big Block
    • Engine Make/Size: Chevy Big Block
    • WARNING CA Proposition 65: No
  • Features:
    • Dt Series
    • Ferro-magnetic impregnated core creates an effective EMI choke
    • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
    • For high EMI suppression
    • Conductor core features Dupont Kevlar material
    • Proprietary compound sleeves for resistance to high heat/abrasion
  • The MSD 8.5mm Super Conductor is the ultimate performance wire! Its extremely low-resistance combined with the ability to suppress Electro Magnetic Interference is a combination that defies the common laws of physics. Less resistance means more energy is going to make it to the spark plug to ignite the air/fuel mixture. The Super Conductor uses a copper alloy conductor resulting in less than 50 ohms per foot of wire! This ensures that the most energy possible makes it to the spark plug. By helically winding the conductor around a special core, we are able to produce a highly effective choke to keep the EMI inside the wire and away from other electronics. This combination is encased in a heavy duty sleeve that will withstand abrasion and high temperatures. Cap off each end with our Dual Crimp Terminals and you have the best wire available.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
FAST
Spark Plug Wire Set FAST

P311-57F51C1    295-0082  New

Qty:
In Stock & Ready to Ship
$189.39
  • Firewire 8 Cyl Cut-To-Fit Wireset Kit with Heat Sleeve
  • Kit contains 8 wires. Distributor Terminal is HEI/Socket. Spark plug boots are 90 degrees. Wrapped in Heat Sleeve.
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: Yes
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Firewire 8 Cyl Cut-to-fit Wireset Kit W/ Heat Sleeve
  • Features:
    • The lowest resistance wire available with only 25 ohms per foot
    • Extreme suppression capabilities prevent electronic interference
    • Low resistance means more spark energy reaches the spark plugs
    • Silicone plug boots handle 550?F for long life
    • Silicone-on-silicone sleeve construction resists high temperatures and abrasion
    • Available in custom, universal and sets with heat sleeve installed
    • Braided fiberglass sleeve provides an extra level of protection against heat.
    • Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
  • Having a high powered ignition control is only half the equation when it comes to your engine?s performance ? you also need to ensure that the voltage makes it to the spark plug. The FAST FireWire Spark Plug Wire was designed for performance and racing from the inside-out! For FAST, one of the most important aspects of engineering the low resistance FireWire was to ensure it could effectively filter the electro-magnetic interference and "noise" that occurs within spark plug wires. The answer lies within a unique reactive core design that effectively suppresses EMI ensuring trouble-free operation of the ignition control, EFI system and other on-board electronics. From a performance standpoint, the conductor of the FireWire features the lowest resistance, less than 25 ohms per foot, of resistance. Less resistance means the most spark energy reaches the plug gap for every firing. To combat the extreme conditions that wires face under the hood, the core and conductor are protected with a sleeve of double-layered, pure silicone. This design is effective against header heat, oils and abrasion, and to complete the package, our silicone boots can withstand 550?F!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle

Showing 11 - 20 of 131 Products for Spark Plug Wire Set.