Finish Selecting Your Vehicle

Choose your Engine for your 2003 Hyundai XG350

  • 6 Cyl 3.5L

Shop By Brand

The Following brands are available based on your search.

  • Atlantic Automotive Enterprise
    Atlantic Automotive Enterprise
  • Autopart International
    Autopart International
  • Borgeson
    Borgeson
  • Cardone
    Cardone
  • Mando
    Mando
  • Mapco
    Mapco
  • Nichirin
    Nichirin
  • Tuff Stuff Performance Accessories
    Tuff Stuff Performance Accessories

Showing Products For 2003 Hyundai XG350 Power Steering Pump

Below are all the different brands and applications for 2003 Hyundai XG350 Power Steering Pump

Showing 1 - 10 of 30 Products for Power Steering Pump.

Refine Your Search

Mando
2003 Hyundai XG350 Power Steering Pump Mando

P311-0A5B7AD    W0133-4180488  New

Qty:
In Stock & Ready to Ship
$259.60
Mando Power Steering Pump
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
Brand: Mando
Additional Fitment Information:
Vehicle
2003 - Hyundai XG350
Nichirin
2003 Hyundai XG350 Power Steering Pump Nichirin

P311-1BE9D7E    W0133-1935108  New

Qty:
In Stock & Ready to Ship
$37.75
Nichirin Power Steering Pump
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Line Assembly - Suction
Brand: Nichirin
Additional Fitment Information:
Vehicle
2003 - Hyundai XG350
Cardone
2003 Hyundai XG350 Power Steering Pump Cardone - Power Steering Pump

P311-1DA0453    21-5303  Remanufactured

5710039000 , 5710039020

Qty:
In Stock & Ready to Ship
$21.60 $103.24
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Bolt-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
2003 - Hyundai XG350
Mapco
2003 Hyundai XG350 Power Steering Pump Mapco

P311-3D21BE4    96332M  New

21-5303 , 57100-39000 , 5729

Qty:
In Stock & Ready to Ship
$35.00 $128.08
  • POWER STEERING PUMP
  • Pump is equipped with a sensor that needs to be transferred from the original pump to the replacement pump.
Brand: Mapco
Additional Fitment Information:
Vehicle
2003 - Hyundai XG350
Autopart International
2003 Hyundai XG350 Power Steering Pump Autopart International

P311-0B84652    W0133-3357379  New

Qty:
In Stock & Ready to Ship
$14.10
Autopart International Power Steering Pump
  • Line Assembly - Suction
Brand: Autopart International
Additional Fitment Information:
Vehicle
2003 - Hyundai XG350
Atlantic Automotive Enterprise
2003 Hyundai XG350 Power Steering Pump 6 Cyl 3.5L Atlantic Automotive Enterprise - New Power Steering Pump

P311-5CEAA2C    5838N  New

Qty:
In Stock & Ready to Ship
$185.52
  • AAE New Hydraulic Power Steering Pump 100% Tested
  • New, w/Pulley, w/o Reservoir
  • New Power Steering Pump
  • Product Attributes:
    • Application Type: Application Specific
    • Bullet Point 1: Each Unit Is 100% Inspected And Hydraulically Tested In The Usa.
    • Bullet Point 2: Pulley Included And Preinstalled.
    • Bullet Point 3: Sensor Included And Preinstalled.
    • Bullet Point 4: Products Are Engineered To Meet Or Exceed Oe Specifications In Performance, Fit And Function.
    • Link to Manufacturer Page: Www.aaesteering.com
    • Warranty Distance: 24000
    • Warranty Distance UOM: Mi
    • Warranty Time UOM: Mo
  • AAE New Hydraulic Power Steering Pumps are manufactured with OE quality components. Each unit undergoes thorough inspection and testing procedures to ensure OE operation and fitment. Prior to shipment, each unit is 100% tested in the USA and held to the strictest standards in the industry. CRP goes beyond original equipment specifications to improve the performance of every part we offer. To safeguard long life, as well as OE performance and operation, be sure to flush and fill the steering system with an OE approved power steering fluid.
Brand: Atlantic Automotive Enterprise
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Hyundai XG350 V 6 Cyl 3.5L - 3500
Cardone
2003 Hyundai XG350 Power Steering Pump Cardone - Power Steering Pump

P311-2D536DE    96-5303  New

5710039000 , 5710039020

Qty:
In Stock & Ready to Ship
$180.50
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Seal Kit
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • Manufactured With Premium Grade, High-temperature Seals For Added Durability Under All Driving Conditions.
      • Meets Or Exceeds O.e. Performance.
      • Precise Bushing Alignment Prevents Premature Shaft And Seal Wear, Significantly Reducing Noise And Vibration.
      • Rigorous Computer Load Testing Ensures Optimal Performance And Durability By Incorporating Real-world Parameters During The Test Cycle.
    • Hose Port Type: O-ring
    • Housing Material: Aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: New
    • Pulley Attachement Type: Bolt-on
    • Pulley Included: Yes
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle
2003 - Hyundai XG350
Cardone
2003 Hyundai XG350 Power Steering Pump Cardone - w/o Reservoir

P311-161F401    W0133-2258295  Remanufactured

Qty:
In Stock & Ready to Ship
$26.00 $253.54
Cardone Power Steering Pump
  • Remanufactured
  • w/o Reservoir
Brand: Cardone
Additional Fitment Information:
Vehicle
2003 - Hyundai XG350
Mapco
Power Steering Pump Mapco

P311-3F7F6AE    97240M  New

Qty:
In Stock & Ready to Ship
$150.00 $136.09
  • Power Steering Pump

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mapco
Additional Fitment Information:
Vehicle
Tuff Stuff Performance Accessories
Power Steering Pump Tuff Stuff Performance Accessories

P311-2D8BCEB    6170AL-1  New

Qty:
In Stock & Ready to Ship
$159.22
Tuff Stuff Performance Accessories Power Steering Pump
  • Type II Alum. Power Steering Pump
  • Type II Alum. Power Steering Pump; GM PressureSlipFitting; M8x1.25 Threaded Hole Mtg; Btm PressurePort; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
  • Features:
    • Compact Size Ideal For Tight Applications
    • Requires A Press Fit Pulley Not Included
    • 1200 PSI Rating
    • 3 GPM Flow
    • Bottom Pressure Port
    • 100% New Components
    • Made In The U.S.A.
    • Clockwise Rotation Only
  • Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Tuff Stuff Performance Accessories
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 30 Products for Power Steering Pump.