Finish Selecting Your Vehicle

Choose your Submodel for your 2003 GMC Envoy

  • SLE
  • SLT

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • BBB Industries
    BBB Industries
  • Borgeson
    Borgeson
  • Cardone
    Cardone
  • Mapco
    Mapco
  • Maval
    Maval
  • PWR
    PWR
  • Tuff Stuff Performance Accessories
    Tuff Stuff Performance Accessories

Showing Products For 2003 GMC Envoy Power Steering Pump

Below are all the different brands and applications for 2003 GMC Envoy Power Steering Pump

Showing 1 - 10 of 34 Products for Power Steering Pump.

Refine Your Search

Cardone
2003 GMC Envoy Power Steering Pump 6 Cyl 4.2L Cardone - Power Steering Pump

P311-31BDF45    20-65990  Remanufactured

15029778 , 15087916 , 26089214 , 26112229 , 8261122290 , 88963627

Qty:
In Stock & Ready to Ship
$22.50 $71.69
Cardone Power Steering Pump
  • Standard Wheelbase Reservoir Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: Yes
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2003 - GMC Envoy SLT L 6 Cyl 4.2L 256 -
Maval
2003 GMC Envoy Power Steering Pump Maval - w/o Reservoir

P311-31BAB93    W0133-1928556  Remanufactured

Qty:
In Stock & Ready to Ship
$77.00 $139.50
Maval Power Steering Pump
  • Remanufactured
  • w/o Reservoir
Brand: Maval
Additional Fitment Information:
Vehicle
2003 - GMC Envoy
Cardone
2003 GMC Envoy Power Steering Pump Cardone - Power Steering Pump

P311-2D246ED    20-990  Remanufactured

15191020 , 26112227 , 26112229 , 26112231 , 8151179510 , 8261122270 , 8261122290

Qty:
In Stock & Ready to Ship
$25.20 $53.88
Cardone Power Steering Pump
  • Standard Wheelbase Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel
2003 - GMC Envoy SLE
Mapco
2003 GMC Envoy Power Steering Pump 6 Cyl 4.2L Mapco - Power Steering Pump

P311-5129157    97143M  Remanufactured

20-990 , 261212229

Qty:
In Stock & Ready to Ship
$25.00 $84.05
  • Power Steering Pump
Brand: Mapco
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - GMC Envoy L 6 Cyl 4.2L 256 -
PWR
2003 GMC Envoy Power Steering Pump 6 Cyl 4.2L PWR

P311-56069F5    60-5031PR  New

Qty:
In Stock & Ready to Ship
$211.30
PWR Power Steering Pump
  • New Power Steering Pump With Pulley and Reservoir
  • Supplied With Pulley and Reservoir
  • Product Attributes:
    • Hose Port Type: O-ring
    • Inlet Diameter: 10
    • Pulley Attachment Type: Press On
    • Pulley Included: Yes
    • Reservoir Included: Yes
    • Shaft Type: Press On
  • Direct Fit - to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks & Gears are 100% tested for leaks, pressure, noise and function
Brand: PWR
Additional Fitment Information:
Vehicle Wheel FeedBase Block Engine CID CC
2003 - GMC Envoy 113.0 L 6 Cyl 4.2L 256 -
BBB Industries
2003 GMC Envoy Power Steering Pump 6 Cyl 4.2L BBB Industries - Reman Power Steering Pump

P311-0DFF23B    734-72132  Remanufactured

15029778 , 15087916 , 19320089 , 26089214 , 26112229 , 88963627

Qty:
In Stock & Ready to Ship
$19.00 $65.23
BBB Industries Power Steering Pump
  • with Reservoir; ** Reservoir Units Are Recommended Replacement **
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Reservoir
    • Inlet Diameter: 0.385
    • Inlet Size: 0.385
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
    • Reservoir Included: Yes
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - GMC Envoy L 6 Cyl 4.2L 256 -
BBB Industries
2003 GMC Envoy Power Steering Pump 6 Cyl 4.2L BBB Industries - Reman Power Steering Pump

P311-2D6A842    734-0132  Remanufactured

19318781

Qty:
In Stock & Ready to Ship
$11.00 $51.74
BBB Industries Power Steering Pump
  • w/o Reservoir
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Reservoir
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
    • Reservoir Included: No
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - GMC Envoy L 6 Cyl 4.2L 256 -
Cardone
2003 GMC Envoy Power Steering Pump 6 Cyl 4.2L Cardone - Power Steering Pump

P311-3AD1002    96-65990  New

26112229 , 8261122290

Qty:
In Stock & Ready to Ship
$135.90
Cardone Power Steering Pump
  • Standard Wheelbase Reservoir Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Seal Kit
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • Manufactured With Premium Grade, High-temperature Seals For Added Durability Under All Driving Conditions.
      • Meets Or Exceeds O.e. Performance.
      • Precise Bushing Alignment Prevents Premature Shaft And Seal Wear, Significantly Reducing Noise And Vibration.
      • Rigorous Computer Load Testing Ensures Optimal Performance And Durability By Incorporating Real-world Parameters During The Test Cycle.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: Yes
    • Product Condition: New
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: Yes
  • Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2003 - GMC Envoy SLT L 6 Cyl 4.2L 256 -
Cardone
2003 GMC Envoy Power Steering Pump Cardone - w/o Reservoir

P311-3EBAA8C    W0133-2258203  Remanufactured

Qty:
In Stock & Ready to Ship
$10.00 $124.95
Cardone Power Steering Pump
  • Remanufactured
  • w/o Reservoir
Brand: Cardone
Additional Fitment Information:
Vehicle
2003 - GMC Envoy
BBB Industries
2003 GMC Envoy Power Steering Pump 6 Cyl 4.2L BBB Industries - New Power Steering Pump

P311-0F27AAD    N734-72132  New

15029778 , 15087916 , 19320089 , 26089214 , 26112229 , 88963627

Qty:
In Stock & Ready to Ship
$146.70
BBB Industries Power Steering Pump
  • with Reservoir; ** Reservoir Units Are Recommended Replacement **
  • New Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - GMC Envoy L 6 Cyl 4.2L 256 -

Showing 1 - 10 of 34 Products for Power Steering Pump.