Finish Selecting Your Vehicle

Choose your Engine for your 2003 Ford Ranger

  • 6 Cyl 3.0L
  • 6 Cyl 4.0L

Shop By Brand

The Following brands are available based on your search.

  • Dana Spicer Chassis
    Dana Spicer Chassis
  • FAG
    FAG
  • Ford Racing
    Ford Racing
  • National Bearing
    National Bearing
  • SKF
    SKF
  • Timken
    Timken

Showing Products For 2003 Ford Ranger Differential Pinion Seal

Below are all the different brands and applications for 2003 Ford Ranger Differential Pinion Seal

Showing 1 - 10 of 18 Products for Differential Pinion Seal.

Refine Your Search

SKF
2003 Ford Ranger Differential Pinion Seal - Rear 6 Cyl 4.0L SKF

P311-39E7877    W0133-1943557  New

Qty:
In Stock & Ready to Ship
$41.41
SKF Differential Pinion Seal  Rear
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: SKF
Position: Rear
Additional Fitment Information:
Vehicle Drive Type Position Block Engine CID CC
2003 - Ford Ranger 4WD Rear V 6 Cyl 4.0L 245 -
Timken
2003 Ford Ranger Differential Pinion Seal - Rear Timken

P311-18B74AD    3604  New

Qty:
In Stock & Ready to Ship
$18.99
Timken Differential Pinion Seal  Rear
  • Grease/Oil Seal
  • 7.5 in., 8.8 in., 8.8 in. Ring Gear - Independent Rear Suspension
  • Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up
Brand: Timken
Position: Rear
Additional Fitment Information:
Vehicle Position
2003 - Ford Ranger Rear
Timken
2003 Ford Ranger Differential Pinion Seal - Front Outer Timken

P311-52D90BC    714675  New

Qty:
In Stock & Ready to Ship
$12.33
Timken Differential Pinion Seal  Front Outer
  • Grease/Oil Seal
  • Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up
Brand: Timken
Position: Front Outer
Additional Fitment Information:
Vehicle Drive Type Position
2003 - Ford Ranger 4WD Front Outer
Timken
2003 Ford Ranger Differential Pinion Seal - Rear 6 Cyl 4.0L Timken

P311-2D703BE    W0133-2036269  New

Qty:
In Stock & Ready to Ship
$35.38
Timken Differential Pinion Seal  Rear
Brand: Timken
Position: Rear
Additional Fitment Information:
Vehicle Drive Type Position Block Engine CID CC
2003 - Ford Ranger 4WD Rear V 6 Cyl 4.0L 245 -
SKF
2003 Ford Ranger Differential Pinion Seal - Front SKF

P311-27283D8    18472  New

Qty:
In Stock & Ready to Ship
$12.12
SKF Differential Pinion Seal  Front
  • Seal
  • SKF has long been a leader in the design and development of seals, inventing the first integrated shaft seal in 1928. Since then we have continually pioneered new designs and bonding techniques. Our seals are made to specific designs using premium materials to ensure the seal has the correct properties for both the application and it's environment. SKF seals have been on the road for more than a hundred years, keeping lubricants in and contaminants out. SKF products are designed and manufactured to the highest quality standards, ensuring long life and safety.
Brand: SKF
Position: Front
Additional Fitment Information:
Vehicle Region Position
2003 - Ford Ranger Mexico Front
Dana Spicer Chassis
2003 Ford Ranger Differential Pinion Seal - Front Dana Spicer Chassis - FSGR

P311-02C0FD2    43085  New

43085 , 5579448 , 83504946 , DS43085 , F57Z-4L616-AA , ZBP043085

Qty:
In Stock & Ready to Ship
$12.30
Dana Spicer Chassis Differential Pinion Seal  Front
  • Differential Pinion Seal
  • Replaces OE Part Number(s) F57Z-4L616-AA with Dana Model Super 30 Axle
  • FSGR
  • Product Attributes:
    • Axle Model: Dana 35, Dana 44
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Brand: Dana Spicer Chassis
Position: Front
Additional Fitment Information:
Vehicle Position
2003 - Ford Ranger Front
SKF
2003 Ford Ranger Differential Pinion Seal - Rear SKF

P311-3C2B136    18136  New

Qty:
In Stock & Ready to Ship
$8.77
SKF Differential Pinion Seal  Rear
  • Seal
  • with 8.80" Ring Gear
  • SKF has long been a leader in the design and development of seals, inventing the first integrated shaft seal in 1928. Since then we have continually pioneered new designs and bonding techniques. Our seals are made to specific designs using premium materials to ensure the seal has the correct properties for both the application and it's environment. SKF seals have been on the road for more than a hundred years, keeping lubricants in and contaminants out. SKF products are designed and manufactured to the highest quality standards, ensuring long life and safety.
Brand: SKF
Position: Rear
Additional Fitment Information:
Vehicle Region Position
2003 - Ford Ranger Mexico Rear
SKF
2003 Ford Ranger Differential Pinion Seal - Rear SKF

P311-3C2B136    18136  New

Qty:
In Stock & Ready to Ship
$8.77
SKF Differential Pinion Seal  Rear
  • Seal
  • 7.50" Ring Gear
  • SKF has long been a leader in the design and development of seals, inventing the first integrated shaft seal in 1928. Since then we have continually pioneered new designs and bonding techniques. Our seals are made to specific designs using premium materials to ensure the seal has the correct properties for both the application and it's environment. SKF seals have been on the road for more than a hundred years, keeping lubricants in and contaminants out. SKF products are designed and manufactured to the highest quality standards, ensuring long life and safety.
Brand: SKF
Position: Rear
Additional Fitment Information:
Vehicle Region Position
2003 - Ford Ranger Mexico Rear
National Bearing
2003 Ford Ranger Differential Pinion Seal - Rear Outer National Bearing

P311-571E10A    3604  New

12305284 , 18136 , 18190 , 29249 , 2L1W-3N134AA , 2L1Z-3N134AA , 3604 , 47449 , 47680 , A86207P , A86207S , BR3Z-4676-A , C2S1490 , C2S52518 , C7AW4676A , C7AZ4676A , CC7AZ4676A , D0AW4676C , D2AW4676A , D8BW4676AA , D8BZ4676A , D8BZ4676AA , D9AW4676AA , D9AZ4676A , D9AZ467AA , E27W4676A1A , E27W4676AA , E3TZ4676A , E4TW4676A1A , E5DW4676AA , E5DZ4676A , E87W4676BA , E8TZ4676C , F65W-3N134-AA , F65Z-3N134-AA , F89W-4676-AB , F89W-4676-AC , F89W4676AA , F89Z4676AA , N18190 , T3903 , YL8W-7H426-AA1 , YMS3604 , YMSF1009 , ZZL0-26-154 , ZZL0-27-018 , ZZL027018 , ZZR0-27-018 , ZZR0-27-018A

Qty:
In Stock & Ready to Ship
$15.94
National Bearing Differential Pinion Seal  Rear Outer
  • Differential Pinion Seal
  • with 8.8 (in) Ring Gear with Visteon Axle
  • National 3604 Differential Pinion Seal
  • Product Attributes:
    • Flanged Outside Diameter (Inch): 3.150
    • Flanged Outside Diameter (MM): 80.000
    • Helix Type: Clockwise-spiral Lip Design
    • Housing Bore (Inch): 2.777
    • Inside Diameter:
      • 1.812
      • 46.020
    • Outside Diameter:
      • 2.783
      • 70.690
    • Outside Diameter (Inch): 2.783
    • Overall Width with Side Lip (MM): 15.000
    • Overall Width with Side Lip (Inch): 0.591
    • Part Description: Oil Seal
    • Redicoat: Yes
    • Shaft (Inch): 1.812
    • Shaft (MM): 46.020
    • Unit of Dimension: Inch
    • Width (Inch): 0.455
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Brand: National Bearing
Position: Rear Outer
Additional Fitment Information:
Vehicle Position
2003 - Ford Ranger Rear Outer
National Bearing
2003 Ford Ranger Differential Pinion Seal - Rear Outer National Bearing

P311-571E10A    3604  New

Qty:
In Stock & Ready to Ship
$15.94
National Bearing Differential Pinion Seal  Rear Outer
  • Differential Pinion Seal
  • with 7.5 (in) Ring Gear with Visteon Axle
  • National 3604 Differential Pinion Seal
  • Product Attributes:
    • Flanged Outside Diameter (Inch): 3.150
    • Flanged Outside Diameter (MM): 80.000
    • Helix Type: Clockwise-spiral Lip Design
    • Housing Bore (Inch): 2.777
    • Inside Diameter:
      • 1.812
      • 46.020
    • Outside Diameter:
      • 2.783
      • 70.690
    • Outside Diameter (Inch): 2.783
    • Overall Width with Side Lip (MM): 15.000
    • Overall Width with Side Lip (Inch): 0.591
    • Part Description: Oil Seal
    • Redicoat: Yes
    • Shaft (Inch): 1.812
    • Shaft (MM): 46.020
    • Unit of Dimension: Inch
    • Width (Inch): 0.455
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Brand: National Bearing
Position: Rear Outer
Additional Fitment Information:
Vehicle Position
2003 - Ford Ranger Rear Outer

Showing 1 - 10 of 18 Products for Differential Pinion Seal.