Finish Selecting Your Vehicle

Choose your Engine for your 2003 Chrysler 300M

  • 6 Cyl 3.5L

Shop By Brand

The Following brands are available based on your search.

  • Continental
    Continental
  • Delphi
    Delphi
  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • GBR Fuel Injection
    GBR Fuel Injection
  • Holley
    Holley
  • Standard Ignition
    Standard Ignition
  • VDO
    VDO

Showing Products For 2003 Chrysler 300M Fuel Injector

Below are all the different brands and applications for 2003 Chrysler 300M Fuel Injector

Showing 1 - 10 of 36 Products for Fuel Injector.

Refine Your Search

VDO
2003 Chrysler 300M Fuel Injector VDO

P311-5EA070C    W0133-1668949  New

Qty:
In Stock & Ready to Ship
$105.01
VDO Fuel Injector
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Includes O-Ring Seals
Brand: VDO
Additional Fitment Information:
Vehicle
2003 - Chrysler 300M
GBR Fuel Injection
2003 Chrysler 300M Fuel Injector 6 Cyl 3.5L GBR Fuel Injection - Reman Multi Port Fuel Injector

P311-3029B77    812-12127  New

Qty:
In Stock & Ready to Ship
$10.00 $32.36
GBR Fuel Injection Fuel Injector
  • Always replace fuel filter when injector is replaced.
  • Reman Multi Port Fuel Injector
  • GB’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
Brand: GBR Fuel Injection
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Chrysler 300M V 6 Cyl 3.5L 215 3497
Standard Ignition
2003 Chrysler 300M Fuel Injector 6 Cyl 3.5L Standard Ignition

P311-1BBAC73    FJ455  New

12-12127 , 142-651 , 19236331 , 2-38838 , 217-3236 , 4591658AA , 4G1149 , 63837 , 800-1462N , 812-12127 , FI11336S , FJ10704 , M741 , MP-10541 , MP1055 , RL591658AA

Qty:
In Stock & Ready to Ship
$74.27
Standard Ignition Fuel Injector
  • Fuel Injector
  • New
  • Product Attributes:
    • Fuel Injector Type: Mfi Injector
    • Fuel Type: Gas
    • New or Reman: New
    • O-Rings Included: Yes
    • System Type: Top Feed
    • Terminal Gender: Male
    • Terminal Quantity: 2
    • Terminal Type: Blade
  • Stainless-steel calibration slide and spring assembly prevents corrosion within the fuel control body, which leads to an extended service life. Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel. High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions. Fiber-optic yttrium aluminum garnet YAG laser welding and 100 million cycle testing ensure quality in every box.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Chrysler 300M V 6 Cyl 3.5L 215 3497
Continental
2003 Chrysler 300M Fuel Injector Continental

P311-589403C    FI11336S  New

4591658AA , 4G1149 , 63837 , 800-1462N , FJ455 , M741 , RL591658AA

Qty:
In Stock & Ready to Ship
$63.41
Continental Fuel Injector
  • Multi-port Fuel Injector
  • Product Attributes:
    • Body Material: Plastic
    • Flow Rate: 21
    • Fuel Injection Type: Mpfi
    • Fuel Type: Gas
    • Injector Terminal Type: Uscar
    • Terminal Quantity: 2
    • Terminal Type: Pin
    • Wiring Harness Included: No
  • Continental original equipment fuel injectors are identical fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Continental fuel injectors are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being original equipment while still maintaining a competitive price.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
Brand: Continental
Additional Fitment Information:
Vehicle
2003 - Chrysler 300M
Delphi
Fuel Injector Delphi

P311-2FEE12F    FJ10471  New

12575073 , 17114101 , 25176061

Qty:
In Stock & Ready to Ship
$90.65
Delphi Fuel Injector
  • Fuel Injector
  • Product Attributes:
    • Attachment Method: Clip
    • Body Material: Metal And Plastic
    • Connector Gender: Female
    • Connector Shape: Rectangle
    • Fuel Injection Type: Gas
    • Fuel Type: Gas
    • Mounting Hardware Included: No
    • New or Reman'd: New
    • O-Ring Quantity: 2
    • Retainer Clips Included: Yes
    • System Type: Light Duty Injector
    • Terminal Quantity: 2
    • Terminal Type: Blade
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Delphi
Additional Fitment Information:
Vehicle
FAST
Fuel Injector FAST

P311-24A4783    30332-8  New

Qty:
In Stock & Ready to Ship
$415.98
  • Precision-Flow LS2 Profile 33 Lb/Hr High Impedance Injectors - Set of 8
  • This pack of fuel injectors includes eight 33 Lb/Hr LS2 Type Fuel Injectors.
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Flow Rate (Lb/Hr) at 58 PSI: 33
    • Injector Electrical Connector Style: Uscar/ev6
    • O-Ring to O-Ring Height: 2.078
    • Title: Precision-flow Ls2 Profile 33 Lb/hr High Impedance Injectors - Set Of 8
  • FAST Precision-Flow Fuel Injectors deliver the outstanding idle quality, unparalleled flow consistency and durability essential for high performance EFI engine applications. Engineered to yield faster throttle response, reduced clogging and superior fuel atomization, Precision-Flow Fuel Injectors are manufactured to the tightest tolerances in the industry. FAST also offers Precision-Flow Fuel Injectors specifically for GM Gen IV engines that are the highest flowing injectors available for these applications and are uniquely designed for direct installation into LS2 and LS3/LS7/L76/L92/L99-style engines. Available in two different height configurations and a wide range of flow rates, the injectors are correctly sized (shorter than common LS1/LS6 injectors) and feature the correct EV6/USCAR connector, enabling a hassle-free plug-in operation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
FAST
Fuel Injector FAST

P311-0913B4E    303600  New

Qty:
In Stock & Ready to Ship
$70.73
  • Precision-Flow LS1 Profile 36 Lb/Hr High Impedance Injectors
  • This contains 1 36 Lb/Hr LS1 Type Fuel Injector
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Flow Rate (Lb/Hr) at 43 PSI: 36
    • Injector Electrical Connector Style: Minitimer/ev1
    • O-Ring to O-Ring Height: 2.55
    • Title: Precision-flow Ls1 Profile 36 Lb/hr High Impedance Injectors
  • FAST Precision-Flow Fuel Injectors deliver the outstanding idle quality, unparalleled flow consistency and durability essential for high performance EFI engine applications. Engineered to yield faster throttle response, reduced clogging and superior fuel atomization, Precision-Flow Fuel Injectors are manufactured to the tightest tolerances in the industry. FAST also offers Precision-Flow Fuel Injectors specifically for GM Gen IV engines that are the highest flowing injectors available for these applications and are uniquely designed for direct installation into LS2 and LS3/LS7/L76/L92/L99-style engines. Available in two different height configurations and a wide range of flow rates, the injectors are correctly sized (shorter than common LS1/LS6 injectors) and feature the correct EV6/USCAR connector, enabling a hassle-free plug-in operation.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
FAST
Fuel Injector FAST

P311-36BFE25    303608  New

Qty:
In Stock & Ready to Ship
$458.23
  • Precision-Flow LS1 Profile 36 Lb/Hr High Impedance Injectors - Set of 8
  • This contains 8 36 Lb/Hr LS1 Type Fuel Injectors
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Flow Rate (Lb/Hr) at 43 PSI: 36
    • Injector Electrical Connector Style: Minitimer/ev1
    • O-Ring to O-Ring Height: 2.55
    • Title: Precision-flow Ls1 Profile 36 Lb/hr High Impedance Injectors - Set Of 8
  • FAST Precision-Flow Fuel Injectors deliver the outstanding idle quality, unparalleled flow consistency and durability essential for high performance EFI engine applications. Engineered to yield faster throttle response, reduced clogging and superior fuel atomization, Precision-Flow Fuel Injectors are manufactured to the tightest tolerances in the industry. FAST also offers Precision-Flow Fuel Injectors specifically for GM Gen IV engines that are the highest flowing injectors available for these applications and are uniquely designed for direct installation into LS2 and LS3/LS7/L76/L92/L99-style engines. Available in two different height configurations and a wide range of flow rates, the injectors are correctly sized (shorter than common LS1/LS6 injectors) and feature the correct EV6/USCAR connector, enabling a hassle-free plug-in operation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
FAST
Fuel Injector FAST

P311-198B3B9    30462-8  New

Qty:
In Stock & Ready to Ship
$629.12
  • Precision-Flow LS2 Profile 46 Lb/Hr High Impedance Injectors - Set of 8
  • This pack of fuel injectors includes eight 46 Lb/Hr LS2 Type Fuel Injectors.
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Flow Rate (Lb/Hr) at 58 PSI: 46
    • Injector Electrical Connector Style: Uscar/ev6
    • O-Ring to O-Ring Height: 2.078
    • Title: Precision-flow Ls2 Profile 46 Lb/hr High Impedance Injectors - Set Of 8
  • Features:
    • Flow rated at 58 PSI.
    • Has USCAR/EV6 Electrical Connection.
  • FAST Precision-Flow Fuel Injectors deliver the outstanding idle quality, unparalleled flow consistency and durability essential for high performance EFI engine applications. Engineered to yield faster throttle response, reduced clogging and superior fuel atomization, Precision-Flow Fuel Injectors are manufactured to the tightest tolerances in the industry. FAST also offers Precision-Flow Fuel Injectors specifically for GM Gen IV engines that are the highest flowing injectors available for these applications and are uniquely designed for direct installation into LS2 and LS3/LS7/L76/L92/L99-style engines. Available in two different height configurations and a wide range of flow rates, the injectors are correctly sized (shorter than common LS1/LS6 injectors) and feature the correct EV6/USCAR connector, enabling a hassle-free plug-in operation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
FAST
Fuel Injector FAST

P311-34D5DD0    30397-8  New

Qty:
In Stock & Ready to Ship
$423.89
  • Precision-Flow LS3/LS7 Profile 39 Lb/Hr High Impedance Injectors - Set of 8
  • This pack of fuel injectors includes eight 39 Lb/Hr LS3/LS7 Type Fuel Injectors.
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Flow Rate (Lb/Hr) at 58 PSI: 39
    • Injector Electrical Connector Style: Uscar/ev6
    • O-Ring to O-Ring Height: 1.48
    • Title: Precision-flow Ls3/ls7 Profile 39 Lb/hr High Impedance Injectors - Set Of 8
  • FAST Precision-Flow Fuel Injectors deliver the outstanding idle quality, unparalleled flow consistency and durability essential for high performance EFI engine applications. Engineered to yield faster throttle response, reduced clogging and superior fuel atomization, Precision-Flow Fuel Injectors are manufactured to the tightest tolerances in the industry. FAST also offers Precision-Flow Fuel Injectors specifically for GM Gen IV engines that are the highest flowing injectors available for these applications and are uniquely designed for direct installation into LS2 and LS3/LS7/L76/L92/L99-style engines. Available in two different height configurations and a wide range of flow rates, the injectors are correctly sized (shorter than common LS1/LS6 injectors) and feature the correct EV6/USCAR connector, enabling a hassle-free plug-in operation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 36 Products for Fuel Injector.