Finish Selecting Your Vehicle

Choose your Engine for your 2003 Chevrolet Tahoe

  • 8 Cyl 4.8L
  • 8 Cyl 5.3L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Airtex
    Airtex
  • AutoBest
    AutoBest
  • Autopart International
    Autopart International
  • Bosch
    Bosch
  • Carter
    Carter
  • Delphi
    Delphi
  • Dorman
    Dorman
  • GMB
    GMB
  • Holley
    Holley
  • LKQ
    LKQ
  • Opparts
    Opparts
  • Skyward
    Skyward
  • TYC Products
    TYC Products
  • TechPro Body
    TechPro Body
  • US Motor Works
    US Motor Works

Showing Products For 2003 Chevrolet Tahoe Fuel Pump Module Assembly

Below are all the different brands and applications for 2003 Chevrolet Tahoe Fuel Pump Module Assembly

Showing 21 - 30 of 45 Products for Fuel Pump Module Assembly.

Refine Your Search

Delphi
2003 Chevrolet Tahoe Fuel Pump Module Assembly 8 Cyl 4.8L Delphi

P311-2E5B3CC    PN3026  New

19121628 , 19153713 , 19369914 , 1AMFP00043 , 25169302 , 25335922 , 25383460 , 402-P3508M , 67307 , 67308 , 67309 , 67311 , 67312 , 67317 , 67458 , 953-0030 , 953-5111 , A30028 , AFS0390S , C0175M , C5341011 , E3508M , F2519A , M2228194 , MPA30028 , MU1138 , MU1518 , MU1615 , MU170 , MU281 , P74832M , RE0390S , SP61321M , SP6170M , USEP3508M

Qty:
In Stock & Ready to Ship
$92.01
  • Fuel Pump Module Assembly
  • with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 24
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
    • Connector Gender: Female
    • Connector Quantity: 1
    • Fuel Filter Included: No
    • Fuel Sending Unit Included: Yes
    • Fuel Tank Pressure Sensor Included: Yes
    • Fuel Type: Gas
    • Gasket Or Seal Included: Yes
    • Gasket Or Seal Material: Nitrile Rubber
    • Grade Type: Regular
    • In Tank or External: In Tank
    • Inlet Type: Strainer
    • Installation Warnings: No
    • Internal Or External Strainer: External
    • Lock Ring Included: No
    • Maximum Pressure: 65
    • Minimum Pressure: 62
    • Mounting Hardware Included: No
    • Negative Ground: No
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Outlet Type: Quick Connect
    • Pump Design: Turbine
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 40
    • Resistance Ohms Full: 250
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Voltage: 13
    • Wire Harness Included: Yes
    • Wire Quantity: 4
  • Features:
    • Each part undergoes testing to ensure the same fit, form, and function as the OE
    • Always be sure to check and clean fuel tank to avoid returns
    • Instructional installation sheets included in every box
  • Sparta, distributed by the only OE full-line fuel supplier Delphi, is specifically designed for higher mileage and earlier model vehicles. Turn to the brand backed by the OE experts, who know fit and performance better than anyone.
Brand: Delphi
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2003 - Chevrolet Tahoe GAS V 8 Cyl 4.8L 294 -
Delphi
2003 Chevrolet Tahoe Fuel Pump Module Assembly 8 Cyl 5.3L Delphi

P311-1C39290    PN3098  New

10355739 , 15049578 , 15113126 , 15161686 , 15205632 , 1AMFP00054 , 402-P3559M , 67452 , 88965445 , 88966962 , A33003 , AFS0868S , C0204M , E3559M , F2560A , M2480518 , MU1378 , MU1639 , P74904M , RE0868S , SP6027M , USEP3559M

Qty:
In Stock & Ready to Ship
$106.84
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 33
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
    • Connector Gender: Female
    • Connector Quantity: 1
    • Connector Shape: Square
    • Fuel Filter Included: No
    • Fuel Sending Unit Included: Yes
    • Fuel Tank Pressure Sensor Included: Yes
    • Fuel Type: Flex
    • Gasket Or Seal Included: Yes
    • Gasket Or Seal Material: Nitrile Rubber
    • Grade Type: Regular
    • In Tank or External: In Tank
    • Inlet Type: Strainer
    • Installation Warnings: No
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 78
    • Minimum Pressure: 51
    • Mounting Hardware Included: No
    • Negative Ground: No
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Outlet Type: Quick Connect
    • Pump Design: Turbine
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 40
    • Resistance Ohms Full: 250
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Voltage: 12
    • Wire Harness Included: No
  • Features:
    • Always be sure to check and clean fuel tank to avoid returns
    • Instructional installation sheets included in every box
    • Each part undergoes testing to ensure the same fit, form, and function as the OE
  • Sparta, distributed by the only OE full-line fuel supplier Delphi, is specifically designed for higher mileage and earlier model vehicles. Turn to the brand backed by the OE experts, who know fit and performance better than anyone.
Brand: Delphi
Additional Fitment Information:
Vehicle Fuel Type Engine VIN Block Engine CID CC
2003 - Chevrolet Tahoe FLEX Z V 8 Cyl 5.3L 325 5328
Opparts
2003 Chevrolet Tahoe Fuel Pump Module Assembly 8 Cyl 4.8L Opparts

P311-54EEA62    60520115  New

Qty:
In Stock & Ready to Ship
$82.81
Opparts Fuel Pump Module Assembly
  • With TCB Tag Code
Brand: Opparts
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Chevrolet Tahoe V 8 Cyl 4.8L 294 -
Dorman
2003 Chevrolet Tahoe Fuel Pump Module Assembly Dorman

P311-5E1657B    2630356  New

150007 , 19121628 , 19153713 , 25169302 , E3508M , FG0324 , MU1615 , P74832M , SP6170M

Qty:
In Stock & Ready to Ship
$139.10
Dorman Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • wo/RPO Code K53 (Robust Fuel System Fuel Sender Assembly)
  • Product Attributes:
    • Contenidos del paquete:
      • 1arn??s
      • 1ensamble Del M??dulo De La Bomba Del Combustible
      • 4conectores De Presi??n
    • Package Contents:
      • 1 Fuel Pump Module Assembly
      • 1 Harness
      • 4 Butt Connectors
    • Terminal Quantity: 4
    • Terminal Type:
      • Horquilla
      • Spade
  • Features:
    • Direct replacement - this fuel pump assembly matches the fit and function of the original equipment fuel pump on specified vehicles
    • Durable construction - this fuel pump is made of quality materials for a long service life
    • Saves money - offers original equipment quality at a competitive price
    • Quality assured - this fuel pump assembly has undergone rigorous testing to ensure reliable performance
  • This fuel pump module assembly matches the fit and function of the original parts in specific vehicles. Built from durable materials, this pump is designed to be reliable over a long service life.
Brand: Dorman
Additional Fitment Information:
Vehicle
2003 - Chevrolet Tahoe
LKQ
2003 Chevrolet Tahoe Fuel Pump Module Assembly LKQ

P311-0886C58    FMD010127  New

Qty:
In Stock & Ready to Ship
$176.48
LKQ Fuel Pump Module Assembly
  • Platinum Pro Part
  • FUEL MODULE
Brand: LKQ
Additional Fitment Information:
Vehicle Fuel Type
2003 - Chevrolet Tahoe FLEX
Holley
Fuel Pump Module Assembly Holley

P311-473F3E1    12-131  New

Qty:
In Stock & Ready to Ship
$724.98
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Returnless; Installs In Any Tank From 7.25 in. To 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-5E83093    12-146  New

Qty:
In Stock & Ready to Ship
$647.15
Holley Fuel Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly; 12 Bolt Flange; 450 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
  • Product Attributes:
    • Flange Type: 12 Bolt
    • Free Flow GPH: 118
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 450
    • Maximum PSI: 87
    • Outlet Size: 10an
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Update Your Fuel Cell To EFI The Easy Way
    • Designed To Drop Right In Your Existing 6/12 Bolt Flange
    • Billet Top Flange Housing
    • Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
  • Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-059CCA6    19-360  New

Qty:
In Stock & Ready to Ship
$521.10
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 340 LPH; Returnless; Install In Any Tank From 7 in. to 12 in. Deep;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • The Easiest Way To Convert Your Vehicle To An In-tank EFI Fuel System
    • Your Factory Fuel Level Sending Unit
    • The Low Profile 5 Inch Diameter Design Is Only 1.275 Inches Thick Above The Tank Mounting Surface
    • The Innovative Clamping System Allows You To Locate The Module Anywhere In The Tank
    • Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing
    • Die Cast Aluminum Construction For Corrosion Resistance And Long Lasting Good Looks
  • Holley/MSD is pleased to announce the release of Sniper Diecast Retrofit Fuel Pump Modules, which support up to 700 EFI horsepower or 900 carbureted horsepower and make it easy to affordably upgrade to EFI. Available in return and returnless versions, they convert your factory tank or fuel cell to an in-tank EFI fuel system. They're easy to install with basic hand tools and require no welding or fabrication whatsoever. Sniper Diecast Retrofit Fuel Pump Modules include a diecast pump-hanger bracket to control pump vibration in a low-profile design thats perfect wherever space is at a premium. They fit any fuel-tank depth from 7 to 12 inches and protrude only 1.275-inch above the tank-mounting surface to accommodate numerous applications. You can locate the 5 inch diameter module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power-source/ground and fuel lines. Supports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-13FC370    19-380  New

Qty:
In Stock & Ready to Ship
$441.48
Holley Fuel Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly; Return Style; 12-Bolt Flange; 340 LPH Drop-In Module; 6AN Inlet/6AN Outlet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Update Your Fuel Cell To EFI The Easy Way
    • Designed To Drop Right In Your Existing 6/12 Bolt Flange
    • Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
  • Updating your racing fuel system to EFI is so simple! Sniper is introducing their latest Diecast Fuel Cell EFI Pump Modules. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an 6AN inlet port, a 6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 700 EFI or 900 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-52782C4    12-147  New

Qty:
In Stock & Ready to Ship
$777.59
Holley Fuel Pump Module Assembly
  • Drop In Fuel Pump Module Assembly
  • Drop In Fuel Pump Module Assembly; Dual Pumps; Free Flow LPH 450; 8AN Inlet/10 AN Outlet; For Use w/12 Bolt Flange Fuel Cells;
  • Product Attributes:
    • Flange Type: 12 Bolt
    • Free Flow GPH: 230
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 900
    • Maximum PSI: 87
    • Outlet Size: 10an
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Complete Drop-In Fuel Module Assembly
    • Billet Top Flange Housing
    • Pump Depth Is Fully Adjustable For Fitment
  • Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single and dual 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 1750 EFI or 2200 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 21 - 30 of 45 Products for Fuel Pump Module Assembly.