Finish Selecting Your Vehicle

Choose your Engine for your 2003 Chevrolet Express 2500

  • 6 Cyl 4.3L
  • 8 Cyl 4.8L
  • 8 Cyl 5.3L
  • 8 Cyl 6.0L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Airtex
    Airtex
  • AutoBest
    AutoBest
  • Carter
    Carter
  • Delphi
    Delphi
  • Holley
    Holley
  • LKQ
    LKQ
  • TYC Products
    TYC Products
  • US Motor Works
    US Motor Works

Showing Products For 2003 Chevrolet Express 2500 Fuel Pump Module Assembly

Below are all the different brands and applications for 2003 Chevrolet Express 2500 Fuel Pump Module Assembly

Showing 1 - 10 of 26 Products for Fuel Pump Module Assembly.

Refine Your Search

ACDelco
2003 Chevrolet Express 2500 Fuel Pump Module Assembly ACDelco

P311-357C2DF    W0133-2082369  New

Qty:
In Stock & Ready to Ship
$710.31
ACDelco Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • GM OE Lifetime Warranty
Brand: ACDelco
Additional Fitment Information:
Vehicle
2003 - Chevrolet Express 2500
Delphi
2003 Chevrolet Express 2500 Fuel Pump Module Assembly Delphi

P311-3C33AEA    W0133-2082369  New

Qty:
In Stock & Ready to Ship
$479.88
Delphi Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Lifetime Warranty
Brand: Delphi
Additional Fitment Information:
Vehicle
2003 - Chevrolet Express 2500
Delphi
2003 Chevrolet Express 2500 Fuel Pump Module Assembly 6 Cyl 4.3L Delphi

P311-09D6C14    FG0326  New

19152157 , 19303373 , 25348387 , 25369312 , 28074112 , 67428 , 953-5112 , 9535112 , A27085 , DFG0326 , E3584M , MU1229 , P75019M , RE0890S , SP3584M

Qty:
In Stock & Ready to Ship
$251.31
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Flow Rating: 29
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 73.0
    • Outlet Fitting Thread Size: M16-1.5
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 40.0
    • Resistance Ohms Full: 250.0
    • Strainer Included: Yes
    • System Pressure: 59 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2003 - Chevrolet Express 2500 GAS V 6 Cyl 4.3L 262 -
Airtex
2003 Chevrolet Express 2500 Fuel Pump Module Assembly 8 Cyl 4.8L Airtex

P311-19A0961    E3584M  New

150278 , 19152157 , 19303373 , 238209 , 25348387 , 25348388 , 25369312 , 2920347 , 402-P3584M , 530-2940 , 67428 , 953-5112 , A27113 , AFS0890S , C0223M , D11111149TG , E3584M , EC584M , EFP3584M , FG0326 , M3510470 , MU1140 , MU1229 , P1559 , P1605M , P75019M , RE0890S , SP3584M , USEP3584M

Qty:
In Stock & Ready to Ship
$166.40
Airtex Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • with 2 Connectors with 2 Tube Ports ; Includes Tank Seal, Connectors, and Wire Harness
  • Product Attributes:
    • Connector Color: White
    • Connector Gender: Male
    • Connector Shape: Oval
    • Filter Included: No
    • Fuel Sending Unit Included: Yes
    • Fuel Tank Pressure Sensor Included: Yes
    • Grade Type: Regular
    • Internal Or External Strainer: External
    • Lock Ring Included: No
    • Minimum Pressure: 60.0
    • Mounting Hardware Included: No
    • Negative Ground: Yes
    • Outlet Fitting Thread Size: 3/8
    • Pump Type:
      • Electric
      • Electrical
    • Regulator Included: No
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Spade
    • Voltage: 12v
    • Wire Quantity: 4
    • Wiring Harness Included: Yes
  • The Airtex Fuel Systems program features unique innovation and solutions by offering premium fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features. Airtex Fuel Pump Modules, Hanger Assemblies, Tank Reservoirs, and Tank Sender Assemblies are built to meet or exceed OEM fit and reliability. Most applications include the necessary accessories such as tank seals, patented high-gradient density strainers and wiring harnesses. Fuel sensor design provides resistance to corrosive fuel blends and additives.
Brand: Airtex
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Chevrolet Express 2500 V 8 Cyl 4.8L 294 -
Carter
2003 Chevrolet Express 2500 Fuel Pump Module Assembly 8 Cyl 4.8L Carter

P311-48C9215    P75019M  New

150278 , 19152157 , 19303373 , 238209 , 25348387 , 25348388 , 25369312 , 2920347 , 530-2940 , 953-5112 , A27085 , A27113 , AFS0890S , C-0223-M , C0223M , D11111149TG , E3584M , FG0326 , M3510470 , MU1140 , MU1229 , MU1230 , RE0890S , SP3574M , SP3584M , USEP3584M

Qty:
In Stock & Ready to Ship
$194.96
Carter Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • with 2 Connectors with 2 Tube Ports ; Includes Tank Seal, Connectors, and Wire Harness
  • Product Attributes:
    • Connector Color: White
    • Connector Gender: Male
    • Connector Shape: Oval
    • Fuel Filter Included: No
    • Fuel Sending Unit Included: Yes
    • Fuel Tank Pressure Sensor Included: Yes
    • Grade Type: Regular
    • Internal Or External Strainer: External
    • Lock Ring Included: No
    • Minimum Pressure: 60.0
    • Mounting Hardware Included: No
    • Negative Ground: Yes
    • Outlet Fitting Thread Size: 3/8
    • Pump Type: Electric
    • Regulator Included: No
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Spade
    • Voltage: 12v
    • Wire Harness Included: Yes
    • Wire Quantity: 4
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
Brand: Carter
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Chevrolet Express 2500 V 8 Cyl 4.8L 294 -
AutoBest
2003 Chevrolet Express 2500 Fuel Pump Module Assembly 8 Cyl 6.0L AutoBest

P311-1158216    F2595A  New

Qty:
In Stock & Ready to Ship
$100.55
AutoBest Fuel Pump Module Assembly
  • Includes Fuel Pump, Fuel Tank Pressure Sensor, Sending Unit, Float, Fuel Reservoir, Fuel Strainer and Tank Seal
  • Product Attributes:
    • Inlet Diameter: 0.37
Brand: AutoBest
Additional Fitment Information:
Vehicle Body Block Engine CID CC
2003 - Chevrolet Express 2500 Standard Passenger Van V 8 Cyl 6.0L 364 5967
TYC Products
2003 Chevrolet Express 2500 Fuel Pump Module Assembly 8 Cyl 6.0L TYC Products - TYC CRQ Premium Fuel Pump Module

P311-16A27E3    150278-A  New

19152157 , 530-2940 , E3584M , EC584M , P75019M , SP3584M

Qty:
In Stock & Ready to Ship
$115.12
TYC Products Fuel Pump Module Assembly
  • TYC CRQ Premium Fuel Pump Module
  • Product Attributes:
    • Accessories Included: Yes
    • Connector Pins Qty On Main Connector: 4pins
    • Fuel Level Sensor Resitance Range: 250-40
    • Fuel Tube Connection Type: Quick Connect
    • Gph (gallons Per Hour Flow): 55.7-68.0
    • Maximum Air Pressure: 72.5-130.5
    • Strainer Included: Yes
Brand: TYC Products
Additional Fitment Information:
Vehicle Block Engine CID CC
2003 - Chevrolet Express 2500 V 8 Cyl 6.0L 364 5967
US Motor Works
2003 Chevrolet Express 2500 Fuel Pump Module Assembly 6 Cyl 4.3L US Motor Works - ELECTRIC FUEL PUMP MODULE

P311-39538AC    USEP3584M  New

Qty:
In Stock & Ready to Ship
$164.14
US Motor Works Fuel Pump Module Assembly
  • ELECTRIC FUEL PUMP MODULE
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
  • Includes: Tank Seal
Brand: US Motor Works
Additional Fitment Information:
Vehicle Fuel Type Engine VIN Block Engine CID CC
2003 - Chevrolet Express 2500 GAS X V 6 Cyl 4.3L 262 -
Holley
Fuel Pump Module Assembly Holley

P311-1236054    12-132  New

Qty:
In Stock & Ready to Ship
$806.53
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 450 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 450
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-52782C4    12-147  New

Qty:
In Stock & Ready to Ship
$782.55
Holley Fuel Pump Module Assembly
  • Drop In Fuel Pump Module Assembly
  • Drop In Fuel Pump Module Assembly; Dual Pumps; Free Flow LPH 450; 8AN Inlet/10 AN Outlet; For Use w/12 Bolt Flange Fuel Cells;
  • Product Attributes:
    • Flange Type: 12 Bolt
    • Free Flow GPH: 230
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 900
    • Inlet Size: 8an
    • Maximum PSI: 87
    • Outlet Size: 10an
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Complete Drop-In Fuel Module Assembly
    • Billet Top Flange Housing
    • Pump Depth Is Fully Adjustable For Fitment
  • Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single and dual 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 1750 EFI or 2200 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 26 Products for Fuel Pump Module Assembly.