Finish Selecting Your Vehicle

Choose your Submodel for your 2003 Audi A4 Quattro

  • Avant
  • Base

Shop By Brand

The Following brands are available based on your search.

  • ATE
    ATE
  • ATE Coated
    ATE Coated
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric
  • Dynamic Friction
    Dynamic Friction
  • Mando
    Mando
  • Pagid
    Pagid
  • Raybestos
    Raybestos
  • TRW
    TRW

Showing Products For 2003 Audi A4 Quattro Disc Brake Caliper

Below are all the different brands and applications for 2003 Audi A4 Quattro Disc Brake Caliper

Showing 1 - 10 of 48 Products for Disc Brake Caliper.

Refine Your Search

TRW
2003 Audi A4 Quattro Disc Brake Caliper - Rear Right TRW

P311-2D14162    W0133-2223275  New

Qty:
In Stock & Ready to Ship
$126.76
TRW Disc Brake Caliper  Rear Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • with 245mm Brake Disc
Brand: TRW
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Rear Right
TRW
2003 Audi A4 Quattro Disc Brake Caliper - Rear Right TRW

P311-2D14162    W0133-2223275  New

Qty:
In Stock & Ready to Ship
$126.76
TRW Disc Brake Caliper  Rear Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • with 255mm Brake Disc
Brand: TRW
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Rear Right
TRW
2003 Audi A4 Quattro Disc Brake Caliper - Rear Left TRW

P311-15CE3C0    W0133-2223336  New

Qty:
In Stock & Ready to Ship
$152.74
TRW Disc Brake Caliper  Rear Left
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • with 255mm Brake Disc
Brand: TRW
Position: Rear Left
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Rear Left
TRW
2003 Audi A4 Quattro Disc Brake Caliper - Rear Left TRW

P311-15CE3C0    W0133-2223336  New

Qty:
In Stock & Ready to Ship
$152.74
TRW Disc Brake Caliper  Rear Left
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • with 245mm Brake Disc
Brand: TRW
Position: Rear Left
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Rear Left
Cardone
2003 Audi A4 Quattro Disc Brake Caliper - Rear Left Cardone - Remanufactured Brake Caliper

P311-3E63E61    19-B2891  New

8E0615423B

Qty:
In Stock & Ready to Ship
$62.10 $81.04
Cardone Disc Brake Caliper  Rear Left
  • Remanufactured Unloaded Caliper w/Bracket
  • 245 (mm) Disc Brakes Installation Hardware Included with Metal Piston Supplied with Mounting Bracket
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.0
    • Bracket Included: Yes
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number:
      • 737
      • Lucas 5780/2
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Aluminum
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Inverted Flare
    • Inlet Port Size:
      • 0.472
      • 11.98408
    • Inlet Thread Size: M12x1.0
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.325
      • 8.25175
    • Mounting Hole Thread Diameter:
      • 0.325
      • 8.25175
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 1.499
      • 38.0746
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Rear Left
Cardone
2003 Audi A4 Quattro Disc Brake Caliper - Rear Right Cardone - Remanufactured Brake Caliper

P311-08AD925    19-B2890  New

8E0615424B

Qty:
In Stock & Ready to Ship
$62.10 $81.04
Cardone Disc Brake Caliper  Rear Right
  • Remanufactured Unloaded Caliper w/Bracket
  • 245 (mm) Disc Brakes Installation Hardware Included with Metal Piston Supplied with Mounting Bracket
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.0
    • Bracket Included: Yes
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number:
      • 738
      • Lucas 5780/2
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Aluminum
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Inverted Flare
    • Inlet Port Size:
      • 0.472
      • 11.98408
    • Inlet Thread Size: M12x1.0
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.325
      • 8.25175
    • Mounting Hole Thread Diameter:
      • 0.325
      • 8.25175
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 1.499
      • 38.0746
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Rear Right
ATE
2003 Audi A4 Quattro Disc Brake Caliper - Front Left ATE

P311-44396A0    W0133-1735169  New

Qty:
In Stock & Ready to Ship
$215.85
ATE Disc Brake Caliper  Front Left
  • 100% New
  • with 288mm Brake Disc
  • Front - Left
Brand: ATE
Position: Front Left
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Front Left
ATE
2003 Audi A4 Quattro Disc Brake Caliper - Front Right ATE

P311-42DE1EF    W0133-1735170  New

Qty:
In Stock & Ready to Ship
$215.85
ATE Disc Brake Caliper  Front Right
  • 100% New
  • with 288mm Brake Disc
  • Front - Right
Brand: ATE
Position: Front Right
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Front Right
Centric
2003 Audi A4 Quattro Disc Brake Caliper - Rear Left 4 Cyl 1.8L Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-2F4A9B4    141.33560  Remanufactured

Qty:
In Stock & Ready to Ship
$60.00 $75.70
Centric Disc Brake Caliper  Rear Left
  • Centric Semi-Loaded Brake Caliper
  • Fr Ch# 8E-3-235 001 To Ch# 8E-5-060 000
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.03400
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 12.0
      • 12.000
      • M12x1.0
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2003 - Audi A4 Quattro Rear Left L 4 Cyl 1.8L - 1781
Cardone
2003 Audi A4 Quattro Disc Brake Caliper - Front Left Cardone - Remanufactured Brake Caliper

P311-1EA81C7    19-1816  New

4B0615124 , 8D0615123B , 8E0615123A , 8E0615123A

Qty:
In Stock & Ready to Ship
$41.40 $45.19
Cardone Disc Brake Caliper  Front Left
  • Remanufactured Unloaded Caliper
  • with Forward Mount Brake Calipers 312 (mm) Disc Brakes Installation Hardware Included with Metal Piston Supplied without Mounting Bracket Check position of caliper prior to removal of old unit
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: Yes
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.0
    • Bracket Included: No
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number: 967
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Cast Iron
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Inverted Flare
    • Inlet Port Size:
      • 0.394
      • 10.00366
    • Inlet Thread Size: M10x1.0
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: No
    • Mounting Bracket Included: No
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.725
      • 18.40775
    • Mounting Hole Thread Diameter:
      • 0.725
      • 18.40775
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 2.242
      • 56.9468
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
2003 - Audi A4 Quattro Front Left

Showing 1 - 10 of 48 Products for Disc Brake Caliper.