Breakaway Converter for '72' to '80 Torqueflite 904-988
This Breakaway Converter is designed specifically for '72 to '80 Torqueflite 904/988 transmissions. Usually provides 2200 to 2400 Stall behind Small Blocks and 2400 to 2600 Stall Behind Big Blocks.
Expected Stall Speed with Big Block:2400 To 2600 Rpm
Expected Stall Speed with Small Block:2200 To 2400 Rpm
Rear Gear Ratio:3.00 To 3.73
Torque Converter Series:Breakaway
The first step into serious high performance, the Breakaway is a great torque converter for moderately modified street machines and weekend racers that are also used as daily drivers. It provides approximately 2400 to 2600 RPM flash stall without negatively affecting part throttle driving. Designed for both efficiency at highway cruising speeds and to launch hard at wide open throttle, the Breakaway is a fantastic all-around torque converter featuring furnace-brazed fins, needle bearings, a hardened, pre-ground pump hub and computer balancing.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
TH350/400 with Dual Pattern Ultimate StreetFighter Converter.
This Ultimate StreetFighter Converter is designed to provide 3500+ Stall behind Small Blocks and 3800 Stall behind Big Blocks.
Product Attributes:
Advertised Cam Duration:290 Degrees + Up
Engine Characteristics:Up To 750 Hp W/ Power Adders, Custom Application
Expected Stall Speed with Big Block:3500 And Up
Expected Stall Speed with Small Block:3500 And Up
Rear Gear Ratio:3.73 And Up
Torque Converter Series:Ultimate Streetfighter
The latest in the line of TCI torque converters, the Ultimate StreetFighter is designed specifically for extreme street machines and to bridge the gap between the TCI competition series and Super StreetFighter Converters. This torque converter is as close to a fully race-prepped torque converter as you can get and features furnace-brazed, hand-welded fins and a cast steel stator, as well as anti-balloon plates.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Breakaway Converter for '84-'97 700R4, '93-'97 4L60E and '97-'05 Corvette.
This Breakaway Converter is designed specifically for '84-'97 700R4, '93-'97 4L60E and '97-'05 Corvette. Provides 2200 to 2400 Stall behind Small Blocks and 2400 to 2600 Stall behind Big Blocks.
Expected Stall Speed with Big Block:2400 To 2600 Rpm
Expected Stall Speed with Small Block:2200 To 2400 Rpm
Lock Up Type:Yes
Rear Gear Ratio:3.00 To 3.73
Torque Converter Series:Breakaway
The first step into serious high performance, the Breakaway is a great torque converter for moderately modified street machines and weekend racers that are also used as daily drivers. It provides approximately 2400 to 2600 RPM flash stall without negatively affecting part throttle driving. Designed for both efficiency at highway cruising speeds and to launch hard at wide open throttle, the Breakaway is a fantastic all-around torque converter featuring furnace-brazed fins, needle bearings, a hardened, pre-ground pump hub and computer balancing.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Expected Stall Speed with Big Block:2400 To 2600 Rpm
Expected Stall Speed with Small Block:2200 To 2400 Rpm
Rear Gear Ratio:3.00 To 3.73
Torque Converter Series:Breakaway
TCI 9", 10" and 11" Drag Race Torque Converters can be run in applications with up to 750 horsepower and are most commonly used for a bracket race or street/strip application that leans more toward the "strip." Stall speeds vary depending on application but the average is 3800-4500 RPM for 9" and 10" converters and 3000 RPM for the 11" version. Furnace-brazed and reinforced fins increase durability. Needle bearings reduce drag and increase thrust capacity. Three sets of Torrington bearings replace normal thrust washers used in OEM and some aftermarket converters to triple the thrust capacity capabilities. Hardened steel pump hubs increase strength, durability and longevity while decreasing wear. Increased strength and holding capacity of high load sprags ensure stator stays locked when converter stalls and guarantees converter will stall correctly run after run. Ballooning plates (9" and 10" only) double strength of converter when using transbrake and/or power adders. 360 Degree Mounting Ring.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Breakaway Converter for '81-'84 700R4/200C/2004R with 1.703 in Pilot.
This Breakaway Converter is designed specifically for '81-'83 700R4//200C/2004R with 1.703 in pilots. Provides 2200 to 2400 Stall behind Small Blocks and 2400 to 2600 Stall behind Big Blocks.
Expected Stall Speed with Big Block:2400 To 2600 Rpm
Expected Stall Speed with Small Block:2200 To 2400 Rpm
Lock Up Type:Yes
Rear Gear Ratio:3.00 To 3.73
Torque Converter Series:Breakaway
The first step into serious high performance, the Breakaway is a great torque converter for moderately modified street machines and weekend racers that are also used as daily drivers. It provides approximately 2400 to 2600 RPM flash stall without negatively affecting part throttle driving. Designed for both efficiency at highway cruising speeds and to launch hard at wide open throttle, the Breakaway is a fantastic all-around torque converter featuring furnace-brazed fins, needle bearings, a hardened, pre-ground pump hub and computer balancing.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
StreetFighter Converter for '81-'84 700R4/2004R/200C
This StreetFighter Converter is designed specifically for '81-'84 700R4/200C/2004R transmissions. Provides 3000 to 3400 Stall behind Small Blocks and 3400 to 3600 Stall behind Big Blocks.
Product Attributes:
Advertised Cam Duration:280 To 300 Degrees
Engine Characteristics:Rough Idle, Large Fuel System, Raised Compression Ratio
Expected Stall Speed with Big Block:3400 To 3600 Rpm
Expected Stall Speed with Small Block:3000 To 3400 Rpm
Lock Up Type:Yes
Rear Gear Ratio:3.55 To 4.56
Torque Converter Series:Streetfighter
Designed with the street/strip racer in mind, this torque converter benefits more radically prepared street machines (those with performance cams, aftermarket carburetors and higher compression ratios) to bring the launch RPM in line with the performance enhancements. The StreetFighter allows you to take advantage of horsepower gains found in higher RPM ranges and provides up to 1500 RPM increase in stall over stock.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
StreetFighter Lock-Up Converter for 700R4, 4L60E and Corvette.
This StreetFighter Converter is designed specifically for '84-'97 700R4, '93-'97 4L60E and '97-'05 Corvette. Provides 3000 to 3400 Stall behind Small Blocks and 3400 to 3600 Stall behind Big Blocks.
Product Attributes:
Advertised Cam Duration:280 To 300 Degrees
Engine Characteristics:Rough Idle, Large Fuel System, Raised Compression Ratio
Expected Stall Speed with Big Block:3400 To 3600 Rpm
Expected Stall Speed with Small Block:3000 To 3400 Rpm
Lock Up Type:Yes
Rear Gear Ratio:3.55 To 4.56
Torque Converter Series:Streetfighter
Designed with the street/strip racer in mind, this torque converter benefits more radically prepared street machines (those with performance cams, aftermarket carburetors and higher compression ratios) to bring the launch RPM in line with the performance enhancements. The StreetFighter allows you to take advantage of horsepower gains found in higher RPM ranges and provides up to 1500 RPM increase in stall over stock.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This Breakaway Converter is designed specifically for C6 transmissions with 1.875" crank pilot engines. Provides 2200 to 2400 Stall behind Small Blocks and 2400 to 2600 Stall behind Big Blocks.
Expected Stall Speed with Big Block:2400 To 2600 Rpm
Expected Stall Speed with Small Block:2200 To 2400 Rpm
Rear Gear Ratio:3.00 To 3.73
Torque Converter Series:Breakaway
The first step into serious high performance, the Breakaway is a great torque converter for moderately modified street machines and weekend racers that are also used as daily drivers. It provides approximately 2400 to 2600 RPM flash stall without negatively affecting part throttle driving. Designed for both efficiency at highway cruising speeds and to launch hard at wide open throttle, the Breakaway is a fantastic all-around torque converter featuring furnace-brazed fins, needle bearings, a hardened, pre-ground pump hub and computer balancing.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Saturday Night Special Converter for 24-Spline '66 to '69 C4
This Saturday Night Special Converter is specifically designed for '66-'69 C4 Transmissions. Provides 1600 to 1800 Stall behind Small Blocks and 1800 to 2000 Stall behind Big Blocks.
Product Attributes:
Advertised Cam Duration:Stock To 265 Degrees
Engine Characteristics:Smooth Idle, Stock Compression Ratio
Expected Stall Speed with Big Block:1800 To 2000 Rpm
Expected Stall Speed with Small Block:1600 To 1800 Rpm
Rear Gear Ratio:Stock To 3.23
Torque Converter Series:Saturday Night Special
The popular Saturday Night Special Torque Converter delivers premium performance at a reasonable cost. A great choice for show cars and street rods, this converter incorporates many of the manufacturing processes and performance features found in TCI full competition models, including furnace-brazed fins and a hardened, pre-ground pump hub.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: TCI Automotive
Additional Fitment Information:
Vehicle
Showing
1 -
10
of
29 Products for Automatic Transmission Torque Converter.