802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Submodel for your 2002 Nissan Sentra

  • CA
  • GXE
  • GXE Sport
  • SE-R
  • SE-R Spec V
  • XE

Shop By Brand

The Following brands are available based on your search.

  • Atlantic Automotive Enterprise
    Atlantic Automotive Enterprise
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Hitachi
    Hitachi
  • Mapco
    Mapco

Showing Products For 2002 Nissan Sentra Power Steering Pump

Below are all the different brands and applications for 2002 Nissan Sentra Power Steering Pump

Showing 1 - 10 of 10 Products for Power Steering Pump.

Refine Your Search

Atlantic Automotive Enterprise
2002 Nissan Sentra Power Steering Pump Atlantic Automotive Enterprise

P311-2205839    5576  New

Qty:
Atlantic Automotive Enterprise Power Steering Pump
  • L4
Brand: Atlantic Automotive Enterprise
Additional Fitment Information:
Vehicle
2002 - Nissan Sentra
Cardone
2002 Nissan Sentra Power Steering Pump 4 Cyl 1.8L Cardone - Reman. Power Steering Pump

P311-12FAEE5    21-5152  Remanufactured

491105M010 , 491108B700 , 491108B710

Qty:
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/o Reservoir
  • In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system ; Supplied w/o Reservoir
  • Reman. Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% New Armatures
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Brush Assembly Tolerance Specs Validated Or Replaced With New Components, If Necessary
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Package Contents: Pump, O-ring (3), Washer (2), Instruction Sheet
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Spline
  • CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Nissan Sentra L 4 Cyl 1.8L - 1769
Cardone
2002 Nissan Sentra Power Steering Pump 4 Cyl 2.5L Cardone - Reman. Power Steering Pump

P311-0813ECC    21-5304  Remanufactured

491108J000

Qty:
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/o Reservoir
  • In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system ; Supplied w/o Reservoir
  • Reman. Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% New Armatures
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Brush Assembly Tolerance Specs Validated Or Replaced With New Components, If Necessary
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Package Contents: Pump, O-ring (3), Washer (2), Instruction Sheet
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Spline
  • CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Nissan Sentra L 4 Cyl 2.5L 152 2488
BBB Industries
2002 Nissan Sentra Power Steering Pump 4 Cyl 1.8L BBB Industries - Reman Power Steering Pump

P311-21275D6    990-0179  New

Qty:
BBB Industries Power Steering Pump
  • ; w/o Reservoir
  • Reman Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Nissan Sentra L 4 Cyl 1.8L - 1769
BBB Industries
2002 Nissan Sentra Power Steering Pump 4 Cyl 2.5L BBB Industries - Reman Power Steering Pump

P311-4CFA55F    990-0631  New

Qty:
BBB Industries Power Steering Pump
  • ; w/o Reservoir
  • Reman Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Nissan Sentra L 4 Cyl 2.5L 152 2488
Hitachi
2002 Nissan Sentra Power Steering Pump Hitachi

P311-0DF2F56    PSP0009  New

49110-8J000

Qty:
Hitachi Power Steering Pump
  • POWER STEERING PUMP ACTUAL OE PART - NEW
  • ; Includes: 2 washers Grade: Actual OE Availability: Available to Order New Or Remanufactured: New Pulley Attachment Type: Bolt-on Pulley Included: Yes Reservoir Included: No
  • Product Attributes:
    • California Proposition 65: Warning Cancer. Advertencia Cáncer. Avertissement Cancer. Www.p65warnings.ca.gov
    • Copper Washer Included: Yes
    • Manufacturer: Hitachi
    • Mounting Hardware Included: No
    • New Or Remanufactured: New
    • Quantity Copper Washer Needed Per Unit: 2
  • Hitachi power steering pumps offer high displacement for reduced turning effort. Low friction and even fluid flow contribute to engine efficiency. All Hitachi power steering pumps come brand new with the needed gaskets and pulleys to help expedite installation times. Built with an aluminum housing for reduced weight and increased thermal efficiency, the internal components are made of high-strength steel alloy for greater durability and increased longevity. The housing and internal components are precision machined to increase pump efficiency and deter pressure loss while also decreasing Noise, Vibration and Harshness (NVH) characteristics for a smoother, more reliable pump versus other products. Designed to meet the exact needs of each specific vehicle, Hitachi power steering pumps are the premium choice.
Brand: Hitachi
Additional Fitment Information:
Vehicle Submodel
2002 - Nissan Sentra SE-R Spec V
Hitachi
2002 Nissan Sentra Power Steering Pump Hitachi

P311-14328C1    PSP0010  New

49110-4Z800

Qty:
Hitachi Power Steering Pump
  • POWER STEERING PUMP ACTUAL OE PART - NEW
  • From 07/2002; Includes: 2 washers Grade: Actual OE Availability: Available to Order New Or Remanufactured: New Pulley Attachment Type: Bolt-on Pulley Included: Yes Reservoir Included: No
  • Product Attributes:
    • California Proposition 65: Warning Cancer. Advertencia Cáncer. Avertissement Cancer. Www.p65warnings.ca.gov
    • Copper Washer Included: Yes
    • Manufacturer: Hitachi
    • Mounting Hardware Included: No
    • New Or Remanufactured: New
    • Quantity Copper Washer Needed Per Unit: 2
  • Hitachi power steering pumps offer high displacement for reduced turning effort. Low friction and even fluid flow contribute to engine efficiency. All Hitachi power steering pumps come brand new with the needed gaskets and pulleys to help expedite installation times. Built with an aluminum housing for reduced weight and increased thermal efficiency, the internal components are made of high-strength steel alloy for greater durability and increased longevity. The housing and internal components are precision machined to increase pump efficiency and deter pressure loss while also decreasing Noise, Vibration and Harshness (NVH) characteristics for a smoother, more reliable pump versus other products. Designed to meet the exact needs of each specific vehicle, Hitachi power steering pumps are the premium choice.
Brand: Hitachi
Additional Fitment Information:
Vehicle Submodel
2002 - Nissan Sentra CA
Mapco
2002 Nissan Sentra Power Steering Pump 4 Cyl 2.5L Mapco

P311-0BDD48E    96362M  Remanufactured

21-5304 , 5576 , 49100-8J000

Qty:
  • POWER STEERING PUMP
  • ; Pump is equipped with a sensor that needs to be transferred from the original pump to the replacement pump. If this sensor and related spring and plunger are not transferred correctly, the shaft seal may fail as a result of high pressure.
Brand: Mapco
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Nissan Sentra L 4 Cyl 2.5L 152 2488
Mapco
2002 Nissan Sentra Power Steering Pump 4 Cyl 1.8L Mapco

P311-31E0ADA    96291M  Remanufactured

49110-8B700 , 21-5152 , 5579

Qty:
  • POWER STEERING PUMP
  • ; Pump is equipped with a sensor that needs to be transferred from the original pump to the replacement pump. If this sensor and related spring and plunger are not transferred correctly, the shaft seal may fail as a result of high pressure.
Brand: Mapco
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Nissan Sentra L 4 Cyl 1.8L - 1769

Showing 1 - 10 of 10 Products for Power Steering Pump.