Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric

Showing Products For 2002 Hummer H1 Disc Brake Caliper

Below are all the different brands and applications for 2002 Hummer H1 Disc Brake Caliper

Showing 1 - 10 of 12 Products for Disc Brake Caliper.

Refine Your Search

BBB Industries
2002 Hummer H1 Disc Brake Caliper - Front Left BBB Industries - Reman Caliper with Installation Hardware

P311-5005EDE    97-17004A  Remanufactured

Qty:
$3.00 23.52
BBB Industries Disc Brake Caliper  Front Left
  • ; with 12" Rear Disc
  • Reman Caliper with Installation Hardware
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: 3/8-24 X 1
    • Bleeder Screw Thread (in): 3/8-24
    • Bracket Included: No
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: Rust Preventative
    • Caliper Slides Included: Not Applicable
    • Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 103707
    • Inlet Fitting Type: Banjo Bolt
    • Inlet Port Thread Size (in): 3/8-24
    • Inlet Thread Size: 3/8-24
    • Pads Included: No
    • Piston 1 Diameter (mm): 66
    • Piston Material: Steel
    • Piston Outside Diameter (in): 3
    • Piston Outside Diameter (mm): 66
    • Piston Quantity: 1
    • Prop 65 Warning: Warning: Cancer And Reproductive Harm
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Front Left
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Left
BBB Industries
2002 Hummer H1 Disc Brake Caliper - Front Right BBB Industries - Reman Caliper with Installation Hardware

P311-5188BAF    97-17004B  Remanufactured

Qty:
$3.00 23.52
BBB Industries Disc Brake Caliper  Front Right
  • ; with 12" Rear Disc
  • Reman Caliper with Installation Hardware
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: 3/8-24 X 1
    • Bleeder Screw Thread (in): 3/8-24
    • Bracket Included: No
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: Rust Preventative
    • Caliper Slides Included: Not Applicable
    • Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 103707
    • Inlet Fitting Type: Banjo Bolt
    • Inlet Port Thread Size (in): 3/8-24
    • Inlet Thread Size: 3/8-24
    • Pads Included: No
    • Piston 1 Diameter (mm): 66
    • Piston Material: Steel
    • Piston Outside Diameter (in): 3
    • Piston Outside Diameter (mm): 66
    • Piston Quantity: 1
    • Prop 65 Warning: Warning: Cancer And Reproductive Harm
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Front Right
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Right
Centric
2002 Hummer H1 Disc Brake Caliper - Front Left Centric - Posi-Quiet Loaded Caliper-Preferred

P311-37298C5    142.56034  Remanufactured

Qty:
$40.00 48.79
Centric Disc Brake Caliper  Front Left
  • Posi Quiet Loaded Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Posi-Quiet Loaded Caliper-Preferred
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Left
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Left
Centric
2002 Hummer H1 Disc Brake Caliper - Front Left Centric - Premium Semi-Loaded Caliper

P311-1B0E5C9    141.56034  Remanufactured

Qty:
$40.00 24.08
Centric Disc Brake Caliper  Front Left
  • Centric Semi-Loaded Brake Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Premium Semi-Loaded Caliper
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter: 3/8"-24
    • Bore Size(s) millimeters: 66
    • Bracket Included: No
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): No
    • Caliper & Pad Hardware Include: Yes
    • Color: Gray
    • Finish: Rust Preventative
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter: 3/8"-24
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Quantity: 1
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Left
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Left
Cardone
2002 Hummer H1 Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-1D2601D    18-4342  Remanufactured

J8133847 , 5934648 , 6002215 , 06002215 , 5252987 , 05745454 , 5252612 , 05934648

Qty:
$25.20 38.14
Cardone Disc Brake Caliper  Front Left
  • Rear Mount Caliper with Phenolic Piston Installation Hardware Included ; Check position of caliper prior to removal of old unit
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • First Application Year: 1982
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Quantity: 1
    • Piston Size (OD) (in): 2.597
    • Piston Size (OD) (mm): 65.9638
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE® Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Left
Cardone
2002 Hummer H1 Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-0665A78    18-4342S  Remanufactured

5572430 , J8133846 , 5252987 , 5252612 , J8133847 , 05572426

Qty:
$25.20 44.93
Cardone Disc Brake Caliper  Front Left
  • Rear Mount Caliper with Metal Piston Installation Hardware Included ; Check position of caliper prior to removal of old unit
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • First Application Year: 1982
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Pads Included: No
    • Piston Material: Steel
    • Piston Quantity: 1
    • Piston Size (OD) (in): 2.596
    • Piston Size (OD) (mm): 65.9384
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE® Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Left
Cardone
2002 Hummer H1 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-0665A78    18-4342S  Remanufactured

5572430 , J8133846 , 5252987 , 5252612 , J8133847 , 05572426

Qty:
$25.20 44.93
Cardone Disc Brake Caliper  Front Right
  • Forward Mount Caliper with Metal Piston Installation Hardware Included ; Check position of caliper prior to removal of old unit
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • First Application Year: 1982
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Pads Included: No
    • Piston Material: Steel
    • Piston Quantity: 1
    • Piston Size (OD) (in): 2.596
    • Piston Size (OD) (mm): 65.9384
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE® Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Right
Cardone
2002 Hummer H1 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-5585C14    18-4341S  Remanufactured

J8133846 , 5572426 , 5252986 , 5252611 , 05572430 , 05745452 , J8133847

Qty:
$25.20 44.93
Cardone Disc Brake Caliper  Front Right
  • Rear Mount Caliper with Metal Piston Installation Hardware Included ; Check position of caliper prior to removal of old unit
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • First Application Year: 1982
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Pads Included: No
    • Piston Material: Steel
    • Piston Quantity: 1
    • Piston Size (OD) (in): 2.596
    • Piston Size (OD) (mm): 65.9384
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE® Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Right
Cardone
2002 Hummer H1 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-1D2601D    18-4342  Remanufactured

J8133847 , 5934648 , 6002215 , 06002215 , 5252987 , 05745454 , 5252612 , 05934648

Qty:
$25.20 38.14
Cardone Disc Brake Caliper  Front Right
  • Forward Mount Caliper with Phenolic Piston Installation Hardware Included ; Check position of caliper prior to removal of old unit
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • First Application Year: 1982
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Quantity: 1
    • Piston Size (OD) (in): 2.597
    • Piston Size (OD) (mm): 65.9638
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE® Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
2002 - Hummer H1 Front Right

Showing 1 - 10 of 12 Products for Disc Brake Caliper.