2002 Chevrolet Silverado 1500 HD Engine Valve Lifter Kit Genuine - of 16
P311-2DD9CBEW0133-2355904New
Qty:
In Stock & Ready to Ship
$588.63
This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
16 Piece Set
of 16
Brand: Genuine
Additional Fitment Information:
Vehicle
2002 - Chevrolet Silverado 1500 HD
Engine Valve Lifter Kit COMP Cams
P311-14738D92900-16New
Qty:
In Stock & Ready to Ship
$215.31
Performance Series Solid Lifter Set for Cadillac, Chevrolet, Olds and Pontiac
These Performance Series solid lifters feature a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For 8 cylinder applications with .842" lifter bores.
Product Attributes:
Amazon ASIN:B001gbxjrs
C.A.R.B. E.O. Number:N/a
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for On-Road Vehicles?:No
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?:Yes, But Must Be A Race/competition Only Vehicle.
C.A.R.B. Exemption Reason:N/a
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Engine Family:Pontiac 260-455
Lifter Diameter:0.842
Lifter Series:Performance Series
Lifter Type:Solid Flat Tappet
Oil Band Height:1.1
Oil Band Width:0.41
Seat Height:1.88
Title:Performance Series Solid Lifter Set For Cadillac, Chevrolet, Olds And Pontiac
Weight:86
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Engine Valve Lifter Kit COMP Cams
P311-4CE3C8315854-16New
Qty:
In Stock & Ready to Ship
$796.62
Short Travel Retro-Fit Hydraulic Roller Lifter Set for Chevrolet Big Block
These short travel retro-fit hydraulic roller lifters feature a short travel. These lifters' short travel allows for light pre-load and reduced oil volume for the highest revving lifter for Chevrolet Big Block.
Product Attributes:
Amazon ASIN:B004qohkm2
C.A.R.B. E.O. Number:N/a
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for On-Road Vehicles?:Yes
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?:Yes, But Must Be A Race/competition Only Vehicle.
C.A.R.B. Exemption Reason:No Impact On Pollution Output Of Vehicle.
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Engine Family:Chevrolet 396-454 Big Block
Lifter Diameter:0.842
Lifter Type:Retro-fit Link Bar Hydraulic Roller
Link Bar Included:Yes
Plunger Travel:Short
Seat Height:2.66
Title:Short Travel Retro-fit Hydraulic Roller Lifter Set For Chevrolet Big Block
Weight:150
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Engine Valve Lifter Kit COMP Cams
P311-26C7ACE2910-16New
Qty:
In Stock & Ready to Ship
$184.30
Performance Series Solid Lifter Set for Ford 289-351W, Cleveland and 429-460.
These Performance Series solid lifters feature a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For Ford 289-351W/C-400M and 429-460.
Product Attributes:
Amazon ASIN:B001gbu2ly
C.A.R.B. E.O. Number:N/a
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for On-Road Vehicles?:No
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?:Yes, But Must Be A Race/competition Only Vehicle.
C.A.R.B. Exemption Reason:N/a
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Engine Family:Ford 289-351w, 429-460 And 351c-400m
Lifter Diameter:0.875
Lifter Series:Performance Series
Lifter Type:Solid Flat Tappet
Oil Band Height:1
Oil Band Width:0.54
Seat Height:1.95
Title:Performance Series Solid Lifter Set For Ford 289-351w, Cleveland And 429-460.
Weight:98
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Engine Valve Lifter Kit COMP Cams
P311-4714D1A823-16New
Qty:
In Stock & Ready to Ship
$681.21
Endure-X Solid Roller Lifter Set for Chevrolet Big Block
Product Attributes:
Amazon ASIN:B001r9driu
C.A.R.B. E.O. Number:N/a
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for On-Road Vehicles?:No
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?:Yes, But Must Be A Race/competition Only Vehicle.
C.A.R.B. Exemption Reason:N/a
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Lifter Diameter:0.875
Lifter Series:Endure-x
Lifter Type:Solid Roller
Oil Hole vs. Axle:Perpendicular
Pushrod Seat Location:All Centered
Seat Height:1.88
Title:Endure-x Solid Roller Lifter Set For Chevrolet Big Block
Weight:127
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Engine Valve Lifter Kit COMP Cams
P311-3FE178585301-16New
Qty:
In Stock & Ready to Ship
$806.13
Most consistent, highest performing, and quietest hydraulic lifter on the market
Evolution HCT Lifters offer quite operation expected from a hydraulic tappet and higher RPM demand by many of today's modern engine builds. Most consistent, highest performing, and quietest hydraulic lifter on the market.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Lifter Body Diameter:0.842
Lifter Finish:As Ground
Lifter Overall Height:3.23
Lifter Seat Cup Diameter:0.3125
Lifter Seat Height*:2.475
Lifter Style:Hydraulic Roller
Lifter Travel:0.15
Lifter Wheel Diameter:0.7
Linkbar Bottom:2.59
Oil Band Bottom:0.93
Oil Band Top:1.42
Pushrod Seat Offset:N/a
Recommended Preload:0.1
Retention Method:Linkbar
Roller Type:Needle Bearing
Features:
Designed to meet the demanding performance and durability needs of today's high performance engines, Most consistent performing lifters available
, Quietest hydraulic lifters on the market, Patented design
COMP Cams Evolution HCT (Hydraulic Cartridge Technology) is a new patented tappet. The Evolution HCT tappet provides most consistent performance of any set of lifters in the aftermarket. A combination of self-contained hydraulic cartridge and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market. Startup noise is greatly reduced and a precision controlled bleed down rate ensure excellent performance at high RPM. The patented cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. This patented HCT tappet is not just a performance Original Equipment replacement. This is an all new bespoke design started from a blank canvas developed to meet the demanding performance and durability our customers desire.
Also, as an industry first the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild their lifters in their own garage.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Engine Valve Lifter Kit COMP Cams
P311-4FA264E85001-16New
Qty:
In Stock & Ready to Ship
$696.97
Most consistent, highest performing, and quietest hydraulic lifter on the market
Evolution HCT Lifters offer quite operation expected from a hydraulic tappet and higher RPM demand by many of today's modern engine builds. Most consistent, highest performing, and quietest hydraulic lifter on the market.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Lifter Body Diameter:0.842
Lifter Finish:As Ground
Lifter Overall Height:2.66
Lifter Seat Cup Diameter:0.3125
Lifter Seat Height*:2.66
Lifter Style:Hydraulic Roller
Lifter Travel:0.15
Lifter Wheel Diameter:0.7
Linkbar Bottom:N/a
Oil Band Bottom:0.93
Oil Band Top:1.42
Pushrod Seat Offset:N/a
Recommended Preload:0.1
Retention Method:Factory Tray
Roller Type:Needle Bearing
Features:
Designed to meet the demanding performance and durability needs of today's high performance engines, Most consistent performing lifters available, Quietest hydraulic lifters on the market
COMP Cams Evolution HCT (Hydraulic Cartridge Technology) is a new patented tappet. The Evolution HCT tappet provides most consistent performance of any set of lifters in the aftermarket. A combination of self-contained hydraulic cartridge and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market. Startup noise is greatly reduced and a precision controlled bleed down rate ensure excellent performance at high RPM. The patented cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. This patented HCT tappet is not just a performance Original Equipment replacement. This is an all new bespoke design started from a blank canvas developed to meet the demanding performance and durability our customers desire.
Also, as an industry first the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild their lifters in their own garage.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Engine Valve Lifter Kit COMP Cams
P311-3E9EC1689311-16New
Qty:
In Stock & Ready to Ship
$782.14
Most consistent, highest performing, and quietest hydraulic lifter on the market
Evolution HCT Lifters offer quite operation expected from a hydraulic tappet and higher RPM demand by many of today's modern engine builds. Most consistent, highest performing, and quietest hydraulic lifter on the market.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Lifter Body Diameter:0.873
Lifter Finish:As Ground
Lifter Overall Height:3.13
Lifter Seat Cup Diameter:0.3125
Lifter Seat Height*:2.6
Lifter Style:Hydraulic Roller
Lifter Travel:0.15
Lifter Wheel Diameter:0.7
Linkbar Bottom:2.5
Oil Band Bottom:1.09
Oil Band Top:1.49
Pushrod Seat Offset:N/a
Recommended Preload:0.1
Retention Method:Linkbar
Roller Type:Needle Bearing
Features:
Designed to meet the demanding performance and durability needs of today's high performance engines, Most consistent performing lifters available
, Quietest hydraulic lifters on the market, Patented design
COMP Cams Evolution HCT (Hydraulic Cartridge Technology) is a new patented tappet. The Evolution HCT tappet provides most consistent performance of any set of lifters in the aftermarket. A combination of self-contained hydraulic cartridge and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market. Startup noise is greatly reduced and a precision controlled bleed down rate ensure excellent performance at high RPM. The patented cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. This patented HCT tappet is not just a performance Original Equipment replacement. This is an all new bespoke design started from a blank canvas developed to meet the demanding performance and durability our customers desire.
Also, as an industry first the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild their lifters in their own garage.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Engine Valve Lifter Kit COMP Cams
P311-12668BE89571-16New
Qty:
In Stock & Ready to Ship
$782.14
Most consistent, highest performing, and quietest hydraulic lifter on the market
Evolution HCT Lifters offer quite operation expected from a hydraulic tappet and higher RPM demand by many of today's modern engine builds. Most consistent, highest performing, and quietest hydraulic lifter on the market.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Lifter Body Diameter:0.842
Lifter Finish:As Ground
Lifter Overall Height:3.23
Lifter Seat Cup Diameter:0.3125
Lifter Seat Height*:2.66
Lifter Style:Hydraulic Roller
Lifter Travel:0.15
Lifter Wheel Diameter:0.7
Linkbar Bottom:2.59
Oil Band Bottom:0.93
Oil Band Top:1.42
Pushrod Seat Offset:N/a
Recommended Preload:0.1
Retention Method:Linkbar
Roller Type:Needle Bearing
Features:
Designed to meet the demanding performance and durability needs of today's high performance engines, Most consistent performing lifters available
, Quietest hydraulic lifters on the market, Patented design
COMP Cams Evolution HCT (Hydraulic Cartridge Technology) is a new patented tappet. The Evolution HCT tappet provides most consistent performance of any set of lifters in the aftermarket. A combination of self-contained hydraulic cartridge and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market. Startup noise is greatly reduced and a precision controlled bleed down rate ensure excellent performance at high RPM. The patented cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. This patented HCT tappet is not just a performance Original Equipment replacement. This is an all new bespoke design started from a blank canvas developed to meet the demanding performance and durability our customers desire.
Also, as an industry first the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild their lifters in their own garage.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Engine Valve Lifter Kit COMP Cams
P311-085A4EC821-16New
Qty:
In Stock & Ready to Ship
$309.93
Solid Lifter Set for Chrysler 273-360, 383-440/426 HEMI
Designed and manufactured to the tightest tolerances, these solid lifters for Chrysler 273-360/383-440/426 HEMI feature an exactly milled oil meter band as well as precisely ground lifter faces.
Product Attributes:
Amazon ASIN:B000ciuf0k
C.A.R.B. E.O. Number:N/a
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?:Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
C.A.R.B. Exempt for On-Road Vehicles?:Yes
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?:Yes, But Must Be A Race/competition Only Vehicle.
C.A.R.B. Exemption Reason:No Impact On Pollution Output Of Vehicle.
California Proposition 65:Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Engine Family:Chrysler Hemi 426
Lifter Diameter:0.904
Lifter Series:Solid
Lifter Type:Solid Flat Tappet
Seat Height:1.63
Title:Solid Lifter Set For Chrysler 273-360, 383-440/426 Hemi
Weight:95
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: COMP Cams
Additional Fitment Information:
Vehicle
Showing
1 -
10
of
84 Products for Engine Valve Lifter Kit.