Finish Selecting Your Vehicle

Choose your Engine for your 2002 Chevrolet Impala

  • 6 Cyl 3.4L
  • 6 Cyl 3.8L

Shop By Brand

The Following brands are available based on your search.

  • AutoBest
    AutoBest
  • Bosch
    Bosch
  • Carter
    Carter
  • Delphi
    Delphi
  • Dorman
    Dorman
  • Holley
    Holley
  • Opparts
    Opparts
  • TYC Products
    TYC Products
  • TechPro Body
    TechPro Body
  • US Motor Works
    US Motor Works

Showing Products For 2002 Chevrolet Impala Fuel Pump Module Assembly

Below are all the different brands and applications for 2002 Chevrolet Impala Fuel Pump Module Assembly

Showing 21 - 27 of 27 Products for Fuel Pump Module Assembly.

Refine Your Search

Holley
Fuel Pump Module Assembly Holley

P311-1C60504    12-319  New

Qty:
In Stock & Ready to Ship
$466.41
Holley Fuel Pump Module Assembly
  • OEM Style EFI Fuel Tank Modules
  • OEM Style EFI Fuel Tank Modules; 255 LPH; Includes Fuel Level Sending Unit/Hydra Mat/Internal Fuel Pressure Regulator;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • In-Tank High Pressure 255 lph Unit
    • Fuel Pressure Is Internally Regulated To 58 PSI
    • A Pre-calibrated Fuel-level Sending Unit 73-10 Ohm
    • This Module Also Features A HydraMat Filter
    • HydraMart Filter Also Provides Protection From Contaminate
  • This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 550 horsepower

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-473F3E1    12-131  New

Qty:
In Stock & Ready to Ship
$730.80
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Returnless; Installs In Any Tank From 7.25 in. To 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-2D655A7    12-309  New

Qty:
In Stock & Ready to Ship
$451.07
Holley Fuel Pump Module Assembly
  • OEM Style EFI Fuel Tank Modules
  • OEM Style EFI Fuel Tank Modules; For Use w/LS Swap; 255 LPH; In-Tank Fuel Pump Module; Includes Pre-Calibrated Fuel-Level Sending Unit/Hydra Mat; Internal Fuel Pressure Regulator;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • In-Tank High Pressure 255 lph Unit
    • Fuel Level Sending Unit Designed For Factory Fuel Gauge
    • Includes HydraMat That Provides Protection From Contaminates
    • HydraMat Keeps Fuel Available At Fuel Pickup
    • Fuel Pressure Is Regulated Internally At 58 PSI
    • Eliminates Purchasing An External Pressure Regulator
  • This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower A pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for this application is included This module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates Fuel pressure is internally regulated to 58 psi eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator - no separate return line is required because this module returns excess fuel right inside the tank! This 1955-57 Chevrolet Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line - just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line. This Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat. HydraMat is an amazing patent-pending fuel reservoir system that reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-13FC370    19-380  New

Qty:
In Stock & Ready to Ship
$444.31
Holley Fuel Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly; Return Style; 12-Bolt Flange; 340 LPH Drop-In Module; 6AN Inlet/6AN Outlet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Update Your Fuel Cell To EFI The Easy Way
    • Designed To Drop Right In Your Existing 6/12 Bolt Flange
    • Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
  • Updating your racing fuel system to EFI is so simple! Sniper is introducing their latest Diecast Fuel Cell EFI Pump Modules. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an 6AN inlet port, a 6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 700 EFI or 900 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-103AF31    19-350  New

Qty:
In Stock & Ready to Ship
$466.41
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 340 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • The Easiest Way To Convert Your Vehicle To An In-tank EFI Fuel System
    • Installs In Any Fuel Tank From 7 in. To 12 in. Deep To Fit A Wide Variety Of Applications
    • The Low Profile 5 Inch Diameter Design Is Only 1.275 Inches Thick Above The Tank Mounting Surface
    • The Innovative Clamping System Allows You To Locate The Module Anywhere In The Tank
    • Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing
    • Die Cast Aluminum Construction For Corrosion Resistance And Long Lasting Good Looks
  • Holley/MSD is pleased to announce the release of Sniper Diecast Retrofit Fuel Pump Modules, which support up to 700 EFI horsepower or 900 carbureted horsepower and make it easy to affordably upgrade to EFI. Available in return and returnless versions, they convert your factory tank or fuel cell to an in-tank EFI fuel system. They're easy to install with basic hand tools and require no welding or fabrication whatsoever. Sniper Diecast Retrofit Fuel Pump Modules include a diecast pump-hanger bracket to control pump vibration in a low-profile design thats perfect wherever space is at a premium. They fit any fuel-tank depth from 7 to 12 inches and protrude only 1.275-inch above the tank-mounting surface to accommodate numerous applications. You can locate the 5 inch diameter module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power-source/ground and fuel lines. Supports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-5E83093    12-146  New

Qty:
In Stock & Ready to Ship
$648.14
Holley Fuel Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly; 12 Bolt Flange; 450 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
  • Product Attributes:
    • Flange Type: 12 Bolt
    • Free Flow GPH: 118
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 450
    • Inlet Size: 8an
    • Maximum PSI: 87
    • Outlet Size: 10an
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Update Your Fuel Cell To EFI The Easy Way
    • Designed To Drop Right In Your Existing 6/12 Bolt Flange
    • Billet Top Flange Housing
    • Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
  • Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-4F329F4    19-365  New

Qty:
In Stock & Ready to Ship
$370.09
Holley Fuel Pump Module Assembly
  • Sniper Diecast Retrofit Carbureted Fuel Pump
  • Sniper Diecast Retrofit Carbureted Fuel Pump; Returnless System; Supports Up To 900 Carb HP at 6 PSI; 13.5 Volts; 10.4 AMP Draw;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • The Easiest Way To Convert Your Vehicle To An In-tank Fuel System
    • Installs In Any Fuel Tank From 7 In. To 12 In. Deep
    • To Fit A Wide Variety Of Applications
    • The Low Profile Design Is Only 1.275 In. Thick
    • Above The Tank Mounting Surface For Added Clearance When Needed
    • The Innovative Clamping System Allows You
    • To Locate The Module Anywhere In The Tank Beside
    • Your Existing Sending Unit
    • The Clamping System Allows You
    • To Rotate The Unit 360 Degrees For Easier Clocking
    • Of The Plumbing And Wiring Locations Under Your Ride
    • Die Cast Aluminum Construction
  • External electric fuel pumps have been the performance standard for decades. They continue to perform well, however, the evolution of fuel pump technology has surpassed them in quiet operation and fuel delivery capabilities that an in-tank module can deliver. Looking ahead to the future, Sniper has designed their latest retrofit pump module especially for the carbureted applications. The module design is very similar to the existing EFI pump modules using a 340 LPH pump, but includes a built-in regulator for lower fuel pressure that carburetor applications require. Now you can convert your factory tank or fuel cell to an in-tank fuel system quickly and easily! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! An added bonus is that you can upgrade this module if you eventually change to an EFI system by changing the internal regulator. Supports up to 900 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 21 - 27 of 27 Products for Fuel Pump Module Assembly.