Finish Selecting Your Vehicle

Choose your Engine for your 2002 Chevrolet Avalanche 1500

  • 8 Cyl 5.3L

Shop By Brand

The Following brands are available based on your search.

  • Mr Gasket
    Mr Gasket
  • Proform
    Proform

Showing Products For 2002 Chevrolet Avalanche 1500 Exhaust Header Bolt

Below are all the different brands and applications for 2002 Chevrolet Avalanche 1500 Exhaust Header Bolt

Showing 1 - 10 of 19 Products for Exhaust Header Bolt.

Refine Your Search

Proform
2002 Chevrolet Avalanche 1500 Exhaust Header Bolt 8 Cyl 5.3L Proform

P311-3DCDD06    66754  New

Qty:
In Stock & Ready to Ship
$40.87
  • Wedge-Locking Header Bolts; Hex Head; M8 X .984in; Chevy LS; Nickel Plt; 12 Pcs
  • Hex Head; M8 X .984in; Chevy LS; Nickel Plt
  • Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; M8 Thread X .984 Inch Long; Shiny Nickel Plated; 12.9 Steel; 12 Pcs in kit; Fits GM LS Engines with 1/4in Wide Flange
  • Product Attributes:
    • Applications: Fits Gm Ls Engines With 1/4-inch Wide Flange
    • Category: Header Bolts
    • Diameter: 8mm
    • Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
    • Length: 0.984 Inch
    • Part Type: Header Bolts
  • Each PROFORM 12.9 Steel (equiv. Grade 8+) Header Bolt is permanently assembled with a pair of special washers. When the bolt is torqued to 28+ ft-lbs, the washers super-hardened external teeth bite into and grip the bottom of the bolt head and the top surface of the header. After being self-locked in this manner, any bolt-loosening rotation is blocked by a wedge-locking action created by the washers interfacing, matching cams. It's an uphill climb: vibration that might ordinarily loosen the bolt actually increases the wedge-locking tension, securing the bolt even more. Because this simple wedge-locking method uses tension instead of friction, contact with oil actually facilitates the wedge effect. When changing headers, PROFORM Header Bolts can be untightened with a normal wrench, lubricated, and reused.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Chevrolet Avalanche 1500 V 8 Cyl 5.3L 325 5328
Proform
2002 Chevrolet Avalanche 1500 Exhaust Header Bolt 8 Cyl 5.3L Proform

P311-14E358F    66755  New

Qty:
In Stock & Ready to Ship
$40.87
  • Wedge-Locking Header Bolts; Hex Head; M8 X 1.181in; Chevy LS; Nickel Plt; 12 Pcs
  • Hex Head; M8 X 1.181in; Chevy LS; Nickel Plt
  • Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; M8 Thread X 1.181 Inch Long; Shiny Nickel Plated Finish; 12.9 Steel; 12 Pcs in kit; Fits GM LS Engines with 3/8" Wide Flange
  • Product Attributes:
    • Applications: Fits Gm Ls Engines With 3/8-inch Wide Flange
    • Category: Header Bolts
    • Diameter: 8mm
    • Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
    • Length: 1.181 Inch
    • Part Type: Header Bolts
  • Each PROFORM Grade 8 Header Bolt is permanently assembled with a pair of special washers. When the bolt is torqued to 28+ ft-lbs, the washers super-hardened external teeth bite into and grip the bottom of the bolt head and the top surface of the header. After being self-locked in this manner, any bolt-loosening rotation is blocked by a wedge-locking action created by the washers interfacing, matching cams. Its an uphill climb: vibration that might ordinarily loosen the bolt actually increases the wedge-locking tension, securing the bolt even more. Because this simple wedge-locking method uses tension instead of friction, contact with oil actually facilitates the wedge effect. When changing headers, PROFORM Header Bolts can be untightened with a normal wrench, lubricated, and reused.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Chevrolet Avalanche 1500 V 8 Cyl 5.3L 325 5328
Mr Gasket
2002 Chevrolet Avalanche 1500 Exhaust Header Bolt Mr Gasket - Header Bolt Set

P311-2AF383C    918G  New

Qty:
In Stock & Ready to Ship
$40.90
Mr Gasket Exhaust Header Bolt
  • 12 piece M8-1.25 x 25mm; Black Oxide; [Available While Supplies Last]
  • Header Bolt Set; 12 piece M8-1.25 x 25mm; Black Oxide; [Available While Supplies Last];
  • Header Bolt Set
  • Product Attributes:
    • Engine Make/Size:
      • Chevy 4.8l
      • Chevy 4.8l (vortec)
      • Chevy 5.0l
      • Chevy 5.3l
      • Chevy 5.3l (vortec)
      • Chevy 5.7l (vortec)
      • Chevy 6.0l (vortec)
    • WARNING CA Proposition 65: No
  • Features:
    • Designed For Quick Easy Installation
    • Compact Bolt Head And Flange
    • Black Oxide Finish Resists Corrosion
  • Black oxide finished carbon steel header bolts have a compact hex head and the flange is ideal for use where space is minimal - your typical header flange. Includes twelve (12) M8 - 1.25 x 25mm header bolts.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
2002 - Chevrolet Avalanche 1500
Mr Gasket
2002 Chevrolet Avalanche 1500 Exhaust Header Bolt Mr Gasket - Header Bolt Set

P311-2AF383C    918G  New

Qty:
In Stock & Ready to Ship
$40.90
Mr Gasket Exhaust Header Bolt
  • 12 piece M8-1.25 x 25mm; Black Oxide; [Available While Supplies Last]
  • Header Bolt Set; 12 piece M8-1.25 x 25mm; Black Oxide; [Available While Supplies Last];
  • Header Bolt Set
  • Product Attributes:
    • Engine Make/Size:
      • Chevy 4.8l
      • Chevy 4.8l (vortec)
      • Chevy 5.0l
      • Chevy 5.3l
      • Chevy 5.3l (vortec)
      • Chevy 5.7l (vortec)
      • Chevy 6.0l (vortec)
    • WARNING CA Proposition 65: No
  • Features:
    • Designed For Quick Easy Installation
    • Compact Bolt Head And Flange
    • Black Oxide Finish Resists Corrosion
  • Black oxide finished carbon steel header bolts have a compact hex head and the flange is ideal for use where space is minimal - your typical header flange. Includes twelve (12) M8 - 1.25 x 25mm header bolts.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
2002 - Chevrolet Avalanche 1500
Proform
Exhaust Header Bolt Proform

P311-01B87CD    66751  New

Qty:
In Stock & Ready to Ship
$40.87
Proform Exhaust Header Bolt
  • Wedge-Locking Header Bolts; Hex Head; 3/8 dia. X 3/4in Black Oxide; 12 Pcs
  • Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 3/4 Inch Long; Black Oxide Finish; 12 Pcs in kit; Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
  • Product Attributes:
    • Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
    • Category: Header Bolts
    • Diameter: 3/8-in.
    • Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
    • Length: 3/4 Inch
    • Part Type: Header Bolts
  • PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Proform
Exhaust Header Bolt Proform

P311-45DC6AC    66752  New

Qty:
In Stock & Ready to Ship
$46.01
Proform Exhaust Header Bolt
  • Wedge-Locking Header Bolts
  • Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 3/4 Inch Long; Black Oxide Finish; 16 Pcs in kit; Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
  • Product Attributes:
    • Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
    • Category: Header Bolts
    • Diameter: 3/8-in.
    • Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
    • Length: 3/4 Inch
    • Part Type: Header Bolts
  • PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Mr Gasket
Exhaust Header Bolt Mr Gasket

P311-193BF23    915A  New

Qty:
In Stock & Ready to Ship
$100.91
Mr Gasket Exhaust Header Bolt
  • Header Bolt Set
  • Header Bolt Set; Hex Head; 3/8 in.-16 x 0.75 in.; 100 pc.;
  • Product Attributes:
    • Engine Make/Size: Universal
    • Head Style: Hex
    • WARNING CA Proposition 65: No
    • Wrench Size: 0.4375 In.
  • Features:
    • Quick And Easy Installation
    • Heat-Treated For Strength
    • Ideal For Tight Spaces
    • Grade 5 Material
    • Protective Black Finish
  • Designed for quick, easy installation of headers and heat-treated for extra strength. The special washer faced, smaller-than-standard hex head is for tight spaces.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
Mr Gasket
Exhaust Header Bolt Mr Gasket

P311-10F7E0E    3411MRG  New

Qty:
In Stock & Ready to Ship
$36.56
Mr Gasket Exhaust Header Bolt
  • Header Bolt Set
  • Header Bolt Set; 5/16 in.-18 x 0.75 in.; 12 pc.;
  • Product Attributes:
    • Engine Make/Size: Universal
    • WARNING CA Proposition 65: No
  • Features:
    • Quick And Easy Installation
    • Heat-Treated For Strength
    • Ideal For Tight Spaces
    • Grade 5 Material
    • Protective Black Finish
  • When installing headers you will need header bolts, factory exhaust manifold bolts wont work. These Mr. Gasket Header Bolts are grade 5 for strength and black oxide coated. If youve ever had a set of headers where a socket just seemed it wouldnt fit these might be your answer. These bolts have a socket head or Allen key drive in the center and that compact socket design is ideal for just that problem. Sold as a set of 12.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
Mr Gasket
Exhaust Header Bolt Mr Gasket

P311-33F40F6    3420G  New

Qty:
In Stock & Ready to Ship
$35.24
Mr Gasket Exhaust Header Bolt
  • Header Bolt Set
  • Header Bolt Set; 5.88 in. H x 4 in. W x 1.25 in. D; Combination 6-Point Hex And 6-Point Hex Key Bolt; 12 pc.;
  • Product Attributes:
    • Engine Make/Size: Universal
    • WARNING CA Proposition 65: No
  • Features:
    • Made From High Strength Steel
    • Corrosion Resistant Black Coating
    • Has Both Socket And Hex Heads For Ease Of Use
  • When installing headers you will need header bolts, factory exhaust manifold bolts wont work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a hex head that is ideal for use where space is minimal - your typical header flanges. Ever had a set of headers where a socket just seemed it wouldnt fit? These bolts also have a socket head or Allen key drive in the center for just that problem. Sold as a set of 12Fits: AMC 290-401Chevrolet Small Block 262-400Chrysler Big Block 383-440 (Does not Fit 426 Hemi)Pontiac 326-455Oldsmobile 330-455

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
Mr Gasket
Exhaust Header Bolt Mr Gasket

P311-1CF7FA0    917A  New

Qty:
In Stock & Ready to Ship
$146.42
Mr Gasket Exhaust Header Bolt
  • Header Bolt Set
  • Header Bolt Set; Hex Head; 3/8 in.-16 x 1 in.; 100 pc.;
  • Product Attributes:
    • Engine Make/Size: Universal
    • WARNING CA Proposition 65: No
  • Features:
    • Quick And Easy Installation
    • Heat-Treated For Strength
    • Ideal For Tight Spaces
    • Grade 5 Material
    • Protective Black Finish
  • Designed for make header installation easier and heat-treated for extra strength. The special washer faced, smaller-than-standard hex head is for tight spaces. These bolts are Grade 5 with a 7/16 hex head and a protective black finish, except where noted. Bulk Packaged -100 pieces. 3/8 inch-16 x 1 inch.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 19 Products for Exhaust Header Bolt.