Choose Vehicle Year

  1. Previous
  2. Home
  3. 2001
  4. Porsche
  5. 911
  6. Engine
  7. Engine Oil Pump

Finish Selecting Your Vehicle

Choose your Engine for your 2001 Porsche 911

  • 6 Cyl 3.4L
  • 6 Cyl 3.6L

Shop By Brand

The Following brands are available based on your search.

  • Boundary Pumps
    Boundary Pumps
  • Earl's Performance
    Earl's Performance
  • Original Equipment
    Original Equipment
  • Pierburg
    Pierburg

Showing Products For 2001 Porsche 911 Engine Oil Pump

Below are all the different brands and applications for 2001 Porsche 911 Engine Oil Pump

Showing 1 - 10 of 22 Products for Engine Oil Pump.

Refine Your Search

Pierburg
2001 Porsche 911 Engine Oil Pump 6 Cyl 3.4L Pierburg

P311-5D0EC7A    W0133-3895031  New

Qty:
In Stock & Ready to Ship
$232.40
Pierburg Engine Oil Pump
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Secondary
Brand: Pierburg
Additional Fitment Information:
Vehicle Block Engine CID CC
2001 - Porsche 911 H 6 Cyl 3.4L - 3400
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-5362AC8    CM-S1  New

Qty:
In Stock & Ready to Ship
$434.17
Boundary Pumps Engine Oil Pump
  • The Coyote Motor oil pump starts with the Ford OEM housing, but is assembled with our billet oil pump gear. This pump comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.
    All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-0633745    MM-S1  New

Qty:
In Stock & Ready to Ship
$391.71
Boundary Pumps Engine Oil Pump
  • The Mod Motor oil pump from Boundary utilizes the Ford 3V housing, and comes installed with our mirror finish billet gears. The 3V housing includes the largest pump gears and provides the most flow of any of the available pumps (DOHC and early SOHC).This will provide a boost in mid-range and low end engine protection, as well as the larger gear being stronger.All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished billet gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.Pump is plug and play for all 15/16ths pickup tube vehicles and requires no additional lubrication or work. Bolt on and go!Fits: All Mod Moters Expect 6.2L

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-19DB8FC    CM-OPG-F150  New

Qty:
In Stock & Ready to Ship
$233.54
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish.What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warranty’s.
    Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-2BCB3F7    MM-OPG-4V  New

Qty:
In Stock & Ready to Ship
$233.54
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 1500whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
    Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible coreInner and outer gear set includedUnique race inspired gerotor designEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-23984B1    MM-OPG-3V  New

Qty:
In Stock & Ready to Ship
$233.54
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish.What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
    Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-5DA4A8A    VQ-S1-VHR  New

Qty:
In Stock & Ready to Ship
$705.82
Boundary Pumps Engine Oil Pump
  • The VQ VHR oil pump starts with the Nissan OEM housing, but is assembled with our mirror finished billet oil pump gear. This pump also and comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.This pump has been validated in multiple extreme horsepower naturally aspirated and turbocharged applications. It has been used in the world record holding naturally aspirated 1/4 mile car of Darren Suratt's at 8000 RPM, and in a 8500 RPM 900WHP supercharged VHR.This unit also comes with a preference of relief valve settings for high RPM pressure.All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.Shims:1 Shim +10 PSI2 Shim +20 PSI3 Shim +30 PSI

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-51A4C09    H22-OPG  New

Qty:
In Stock & Ready to Ship
$423.55
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core.After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 13,000 RPM, proven in excess of 1000whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible chromoly coreInner and outer gear machined in matched setsOur own race inspired gerotor design for flow and strengthEach set hand, machine, and hardness inspected with Blueprinting ReportStandard with MartenWear dual stage heat treat for operation over 9,000 RPM.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-0248996    VQ-OPG-VHR  New

Qty:
In Stock & Ready to Ship
$423.55
Boundary Pumps Engine Oil Pump
  • Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish.What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 900whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
    Oil Pump Gear FeaturesMirror Finished and Surface HardenedSurface Ground gears for the ultimate in fitment and performanceIndestructible coreInner and outer gear set includedUnique race inspired gerotor designSymmetrical tooth profile elemenates the gears weak spot making our gear sets indestructibleEach set hand, machine, and hardness inspected with Blueprinting Report

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-1A6B355    CM-S1-R2  New

Qty:
In Stock & Ready to Ship
$381.09
Boundary Pumps Engine Oil Pump
  • The Coyote Motor oil pump starts with the Ford OEM housing, but is assembled with our billet oil pump gear. This pump also and comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.
    All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 22 Products for Engine Oil Pump.