Finish Selecting Your Vehicle

Choose your Submodel for your 2001 Mitsubishi Eclipse

  • GS
  • RS
  • Spyder GS

Shop By Brand

The Following brands are available based on your search.

  • Autopart International
    Autopart International
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric
  • Mando
    Mando
  • Raybestos
    Raybestos

Showing Products For 2001 Mitsubishi Eclipse Disc Brake Caliper

Below are all the different brands and applications for 2001 Mitsubishi Eclipse Disc Brake Caliper

Showing 31 - 40 of 46 Products for Disc Brake Caliper.

Refine Your Search

BBB Industries
2001 Mitsubishi Eclipse Disc Brake Caliper - Front Right 6 Cyl 3.0L BBB Industries - Reman Caliper with Installation Hardware

P311-172D65B    99-17681B  Remanufactured

Qty:
In Stock & Ready to Ship
$35.00 $43.33
BBB Industries Disc Brake Caliper  Front Right
  • Supplied with Mounting Bracket
  • Reman Caliper with Installation Hardware
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: M7-1.0 X 32
    • Bleeder Screw Thread (mm): M7-1.0
    • Bleeder Thread Size: M7-1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: Rust Preventative
    • Caliper Slides Included: Yes
    • Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 6043, 6055
    • Inlet Fitting Type: Banjo Bolt
    • Inlet Port Thread Size (mm): M10-1.0 X 23.4
    • Inlet Thread Size: M10-1.0
    • Pads Included: No
    • Piston 1 Diameter (mm): 60
    • Piston Material: Steel
    • Piston Outside Diameter (in): 2
    • Piston Outside Diameter (mm): 60
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mitsubishi Eclipse Front Right V 6 Cyl 3.0L 181 2972
BBB Industries
2001 Mitsubishi Eclipse Disc Brake Caliper - Rear Right BBB Industries - Reman Caliper with Installation Hardware

P311-32527C3    99-01217B  Remanufactured

Qty:
In Stock & Ready to Ship
$25.00 $44.58
BBB Industries Disc Brake Caliper  Rear Right
  • Supplied with Mounting Bracket
  • Reman Caliper with Installation Hardware
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: M7-1.0 X 32
    • Bleeder Screw Thread (mm): M7-1.0
    • Bleeder Thread Size: M7-1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: Rust Preventative
    • Caliper Slides Included: Yes
    • Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 3506, Or, 3505
    • Inlet Fitting Type: Tube Seat
    • Inlet Port Thread Size (mm): M10-1.0
    • Inlet Thread Size: M10-1.0
    • Pads Included: No
    • Piston 1 Diameter (mm): 35
    • Piston Material: Steel
    • Piston Outside Diameter (mm): 35
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2001 - Mitsubishi Eclipse Rear Right
BBB Industries
2001 Mitsubishi Eclipse Disc Brake Caliper - Front Right 4 Cyl 2.4L BBB Industries - Reman Caliper with Installation Hardware

P311-5DCFF5B    99-01252B  Remanufactured

Qty:
In Stock & Ready to Ship
$20.00 $41.32
BBB Industries Disc Brake Caliper  Front Right
  • Supplied with Mounting Bracket
  • Reman Caliper with Installation Hardware
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: M7-1.0 X 32
    • Bleeder Screw Thread (mm): M7-1.0
    • Bleeder Thread Size: M7-1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: Rust Preventative
    • Caliper Slides Included: Yes
    • Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 6012, R, 6006
    • Inlet Fitting Type: Banjo Bolt
    • Inlet Port Thread Size (mm): M10-1.0 X 27.32
    • Inlet Thread Size: M10-1.0
    • Pads Included: No
    • Piston 1 Diameter (mm): 60
    • Piston Material: Steel
    • Piston Outside Diameter (in): 2
    • Piston Outside Diameter (mm): 60
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mitsubishi Eclipse Front Right L 4 Cyl 2.4L - 2351
Cardone
2001 Mitsubishi Eclipse Disc Brake Caliper - Front Left Cardone - Unloaded w/o Bracket

P311-04FE1CC    W0133-1622176  New

Qty:
In Stock & Ready to Ship
$47.00 $88.64
Cardone Disc Brake Caliper  Front Left
  • Cardone/OEF3 Reman
  • Production: -05/31/2001
  • Friction Ready - with Installation Hardware w/o Bracket
  • Unloaded w/o Bracket
  • Front - Left
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Submodel Position Prod. Date Range
2001 - Mitsubishi Eclipse Spyder GS Front Left To:05-31-01
Cardone
2001 Mitsubishi Eclipse Disc Brake Caliper - Rear Left 6 Cyl 3.0L Cardone - Ultra Caliper

P311-1C001D5    19-P1692  Remanufactured

MR129583

Qty:
In Stock & Ready to Ship
$25.20 $44.82
Cardone Disc Brake Caliper  Rear Left
  • with Metal Piston Supplied with Mounting Bracket Exclusive Weatherproof Coating Installation Hardware Included
  • Ultra Caliper
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Powder Coated
    • Caliper Color: Silver
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure A Trouble Free Installation.
      • An Exclusive Silver Weather-proof Coating That Stops Rust From Forming, Maintaining A Showroom Appearance.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Product Condition: Remanufactured
  • CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go “above and beyond” the average brake caliper.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mitsubishi Eclipse Rear Left V 6 Cyl 3.0L 181 2972
Cardone
2001 Mitsubishi Eclipse Disc Brake Caliper - Rear Right 6 Cyl 3.0L Cardone - Ultra Caliper

P311-20EFBF4    19-P1693  Remanufactured

MR129584

Qty:
In Stock & Ready to Ship
$25.20 $44.82
Cardone Disc Brake Caliper  Rear Right
  • with Metal Piston Supplied with Mounting Bracket Exclusive Weatherproof Coating Installation Hardware Included
  • Ultra Caliper
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Powder Coated
    • Caliper Color: Silver
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure A Trouble Free Installation.
      • An Exclusive Silver Weather-proof Coating That Stops Rust From Forming, Maintaining A Showroom Appearance.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Product Condition: Remanufactured
  • CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go “above and beyond” the average brake caliper.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mitsubishi Eclipse Rear Right V 6 Cyl 3.0L 181 2972
Cardone
2001 Mitsubishi Eclipse Disc Brake Caliper - Front Right 4 Cyl 2.4L Cardone - Unloaded Caliper

P311-259C3C2    19-2615  Remanufactured

Qty:
In Stock & Ready to Ship
$13.50 $47.83
Cardone Disc Brake Caliper  Front Right
  • From 06/2001 with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 60.198
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mitsubishi Eclipse Front Right L 4 Cyl 2.4L - 2351
Cardone
2001 Mitsubishi Eclipse Disc Brake Caliper - Rear Left 6 Cyl 3.0L Cardone - Unloaded Caliper

P311-3BDB143    19-1692  Remanufactured

MB950195 , MR129583

Qty:
In Stock & Ready to Ship
$25.20 $49.45
Cardone Disc Brake Caliper  Rear Left
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 34.798
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mitsubishi Eclipse Rear Left V 6 Cyl 3.0L 181 2972
Cardone
2001 Mitsubishi Eclipse Disc Brake Caliper - Front Right 6 Cyl 3.0L Cardone - Unloaded Caliper

P311-259C3C2    19-2615  Remanufactured

4605A019 , 4605A021 , MN102202 , MN102870 , MR527671 , MR955064

Qty:
In Stock & Ready to Ship
$13.50 $47.83
Cardone Disc Brake Caliper  Front Right
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 60.198
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mitsubishi Eclipse Front Right V 6 Cyl 3.0L 181 2972
Cardone
2001 Mitsubishi Eclipse Disc Brake Caliper - Front Left 6 Cyl 3.0L Cardone - Unloaded Caliper

P311-369686F    19-2614  Remanufactured

4605A018 , 4605A020 , MN102201 , MN102869 , MR527670 , MR955063

Qty:
In Stock & Ready to Ship
$13.50 $47.83
Cardone Disc Brake Caliper  Front Left
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 60.198
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mitsubishi Eclipse Front Left V 6 Cyl 3.0L 181 2972

Showing 31 - 40 of 46 Products for Disc Brake Caliper.