Finish Selecting Your Vehicle

Choose your Engine for your 2001 Mercury Mountaineer

  • 6 Cyl 4.0L
  • 8 Cyl 5.0L

Shop By Brand

The Following brands are available based on your search.

  • Dorman
    Dorman
  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 2001 Mercury Mountaineer Engine Intake Manifold

Below are all the different brands and applications for 2001 Mercury Mountaineer Engine Intake Manifold

Showing 1 - 10 of 149 Products for Engine Intake Manifold.

Refine Your Search

Weiand
2001 Mercury Mountaineer Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

P311-2750F93    8124WND  New

Qty:
In Stock & Ready to Ship
$289.02
Weiand Engine Intake Manifold  Lower
  • Street Warrior™ Intake Manifold
  • Power Band Idle-5500 RPM; Low Rise/Dual Plane; Square Bore Carb Mounting Flange; 3.82 in. Front H/4.75 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise/Dual Plane; Square Bore Carb Mounting Flange; 3.82 in. Front H/4.75 in. Rear Height; Satin Finish;
  • Street Warrior(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford Small Block V8
    • Front Height: 3.820 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 4.750 In.
    • RPM Range: Idle-5500
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Low Rise/Dual Plane Design Builds Maximum Torque
    • Square Bore Carburetor Mounting Flange
    • Permanent Mold Castings Process For Lighter/Smoother/Better Looks
    • Exhaust Crossover For Improved Street Drivability
    • Idle-5500 RPM Power Band
    • Height Front 3.82 in.
    • Rear 4.75 in.
    • Port Size 1.82 in Height x 1.02 in. Width
    • Satin Finish
  • Looking for the ultimate in a high-performance street intake manifold? A lot has changed in the performance world since the time many of the intake manifolds on the market were introduced 20+ years ago. With the popularity of larger stroker engines and more efficient cylinder head/cam designs has come a need for intake manifolds to support these larger displacements. Weiand recognized this and has developed a new line of Street Warrior intake manifolds designed with Computational Fluid Dynamics (CFD) to generate maximum horsepower and torque out of todays engines. Dyno testing of the new Weiand 8124 intake manifold found an additional 14 peak HP and 13lb/ft torque over brand E - p/n 2121.  Average torque was increased by 9.5 and HP by 8.5 from 2,200 to 6,000 RPM! Testing was performed on a 302 with high flow 58cc heads, 268/279 dur/.522 lift Lunati cam P/N 51023, 600 cfm carb & 1-5/8 headers.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mercury Mountaineer Lower V 8 Cyl 5.0L 302 -
Weiand
2001 Mercury Mountaineer Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

P311-2750F93    8124WND  New

Qty:
In Stock & Ready to Ship
$289.02
Weiand Engine Intake Manifold  Lower
  • Street Warrior™ Intake Manifold
  • Power Band Idle-5500 RPM; Low Rise/Dual Plane; Square Bore Carb Mounting Flange; 3.82 in. Front H/4.75 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise/Dual Plane; Square Bore Carb Mounting Flange; 3.82 in. Front H/4.75 in. Rear Height; Satin Finish;
  • Street Warrior(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford Small Block V8
    • Front Height: 3.820 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 4.750 In.
    • RPM Range: Idle-5500
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Low Rise/Dual Plane Design Builds Maximum Torque
    • Square Bore Carburetor Mounting Flange
    • Permanent Mold Castings Process For Lighter/Smoother/Better Looks
    • Exhaust Crossover For Improved Street Drivability
    • Idle-5500 RPM Power Band
    • Height Front 3.82 in.
    • Rear 4.75 in.
    • Port Size 1.82 in Height x 1.02 in. Width
    • Satin Finish
  • Looking for the ultimate in a high-performance street intake manifold? A lot has changed in the performance world since the time many of the intake manifolds on the market were introduced 20+ years ago. With the popularity of larger stroker engines and more efficient cylinder head/cam designs has come a need for intake manifolds to support these larger displacements. Weiand recognized this and has developed a new line of Street Warrior intake manifolds designed with Computational Fluid Dynamics (CFD) to generate maximum horsepower and torque out of todays engines. Dyno testing of the new Weiand 8124 intake manifold found an additional 14 peak HP and 13lb/ft torque over brand E - p/n 2121.  Average torque was increased by 9.5 and HP by 8.5 from 2,200 to 6,000 RPM! Testing was performed on a 302 with high flow 58cc heads, 268/279 dur/.522 lift Lunati cam P/N 51023, 600 cfm carb & 1-5/8 headers.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mercury Mountaineer Lower V 8 Cyl 5.0L 302 -
Dorman
2001 Mercury Mountaineer Engine Intake Manifold - Lower 6 Cyl 4.0L Dorman

P311-422EE33    W0133-2086466  New

Qty:
In Stock & Ready to Ship
$162.74
Dorman Engine Intake Manifold  Lower
  • OE Solutions
Brand: Dorman
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Mercury Mountaineer Lower V 6 Cyl 4.0L 245 -
Weiand
Engine Intake Manifold Weiand

P311-2466FAB    7151WND  New

Qty:
In Stock & Ready to Ship
$719.53
Weiand Engine Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold; Lower; w/Rectangular Port Heads; Includes Rear Mounted Pop Off Plate; w/Boost Gauge Port; Satin Finish;
  • Product Attributes:
    • Blower Size:
      • 6-71
      • 8-71
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Big Block V8
    • Number of Carbs: None; For Fuel Injection
    • RPM Range: N/a
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Easier Installation
    • Satin Finish
  • 6-71/8-71 Chevy B/B 396-502

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Weiand
Additional Fitment Information:
Vehicle
FAST
Engine Intake Manifold FAST

P311-3C605F6    146303  New

Qty:
In Stock & Ready to Ship
$1,368.21
  • LSXHR 103mm Intake Manifold for Cathedral Port LS1, LS2 and LS6
  • FAST® is expanding their line of the industry’s first polymer tunnel ram-style intake manifold, ideal for generating maximum power in boosted and naturally aspirated GM Cathedral Port LS engines.
  • Product Attributes:
    • Aftermarket Fuel Rail Required: No
    • Basic Operating RPM Range: 5000-7500
    • Cylinder Head Configuration: Ls1 / Cathedral Port
    • EGR: No
    • Engine Block Style: Stock/ Oem Standard Deck
    • Injection Style: Multi-port
    • Injectors Included: No
    • Intake Section Included: Complete
    • Multi-Port Fuel Rails Included: Yes
    • Supplemental Bosses Cast-In: No
    • Supplemental Bosses Machined: Yes
    • Throttle Body Bore Size: 103mm
    • Throttle Body Included: No
  • The FAST LSXHR 103mm Intake Manifold is ideal for generating maximum power in boosted and naturally aspirated GM LS cathedral port engines. It ships with a set of “tall” removeable velocity stacks, however “medium” and “short” stack options can be purchased separately. This allows interchanging of the various runner lengths so racers can experiment with finding which combination makes the most power in their application. Its polymer construction is lightweight, very strong and virtually eliminates power-robbing heat soak that occurs with commonly available aluminum intake manifolds. The manifold has been optimized to make power from 5,000 to 7,500 RPM, with testing showing 20+ horsepower gains over competitor tunnel ram intake manifolds. The FAST LSXHR 103mm Intake Manifold is designed specifically with boosted applications in mind and is rated for up to 45psi of continuous boost pressure. The compound fuel injector angle aims the spray pattern for ideal atomization, resulting in maximum power production and superior drivability. Also included with the intake manifold are custom fuel rails and necessary hardware. A reversible top allows for forward- or firewall-facing throttle body installations. The intake manifold also features two nitrous nozzle bosses per runner for clean and easy direct port system installations. Additionally, its 103mm throttle body opening can be port matched up to 105mm.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-17F6609    2504  New

Qty:
In Stock & Ready to Ship
$626.60
Edelbrock Engine Intake Manifold
  • Marine Intake Manifold
  • MANIFOLD; 1955-86 SB CHEVY; PERFORMER RPM; Q-JET MARINE
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Oem
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Cast Aluminum
    • Broad Powerband
  • Edelbrock part #2504 Performer RPM Q-Jet marine intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. This Performer RPM Q-Jet intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-05DD53D    2604  New

Qty:
In Stock & Ready to Ship
$494.31
Edelbrock Engine Intake Manifold
  • Performer Series Air-Gap Intake Manifold
  • MANIFOLD; 1987-95 SB CHEVY 5.0L-5.7L; PERFORMER AIR GAP; Q-JET
  • Product Attributes:
    • Cylinder Head Type: Center Bolt (87-95)
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Based On Performer-Series With Unique Air Gap
    • Air Gap Causes Cool and Dense Mixture More Power
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • Fits Both Spread and Square Bore Carburetors
    • Ideal for Street Rods and Street Machines
  • Edelbrock part #2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads with canted center bolt holes small-block Chevys. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines. Fits spread-bore or square-bore carburetors. Will not fit under stock Corvette hood.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-3E75DDF    28001  New

Qty:
In Stock & Ready to Ship
$885.73
Edelbrock Engine Intake Manifold
  • Big Victor 2 Intake Manifold
  • MANIFOLD; BBC; BIG VICTOR 2; SPREAD PORT; 4500 FLANGE
  • Product Attributes:
    • Cylinder Head Type: Big Chief
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Number of Carbs: One
    • RPM Range: 3500-8500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For 3500 to 8500 RPM High-Performance Engines
    • For Large CID or High RPM Drag Racing Big Blocks
    • Use with Dart Big Chief Cylinder Heads
    • Require Port Matching and Can Use Oval Ports
    • Better Top End Horsepower and Consistency
    • Crisp Throttle Response off the Stop
    • Use for 9.8 in. Deck Height Engines
    • Use Appropriate 4500-Series Carburetor
  • Edelbrock part #28001 Big Victor 2 Spread-Port intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-5BB05E2    28002  New

Qty:
In Stock & Ready to Ship
$897.74
Edelbrock Engine Intake Manifold
  • Big Victor 2 Intake Manifold
  • MANIFOLD; BBC TALL DECK; BIG VICTOR 2; SPREAD PORT; 4500 FLANGE
  • Product Attributes:
    • Cylinder Head Type: Big Chief
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Number of Carbs: One
    • RPM Range: 3500-8500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For 3500 to 8500 RPM High-Performance Engines
    • For Large CID or High RPM Drag Racing Big Blocks
    • Use with Dart Big Chief Cylinder Heads
    • Require Port Matching and Can Use Oval Ports
    • Better Top End Horsepower and Consistency
    • Crisp Throttle Response off the Stop
    • Use for 10.2 in. Deck Height Engines
    • Use Appropriate 4500-Series Carburetor
  • Edelbrock part #28002 Big Victor 2 Spread-Port Tall-Deck intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-1657041    28097  New

Qty:
In Stock & Ready to Ship
$661.77
Edelbrock Engine Intake Manifold
  • Super Victor LS1 Intake Manifold
  • MANIFOLD; GM LS1/LS2; SUPER VICTOR; 4BBL CARB
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block Ls1
    • Number of Carbs: One
    • RPM Range: 3500-8000
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Offers Greater Air Flow Potential
    • Bigger Power Gains
    • Accepted By NASCAR For Grand National Series
    • For Use With Carburetor
  • Edelbrock part #28097 Super Victor LS1 intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and the port exits have been increased to 1.08" x 2.74". Edelbrock offers the optional LS1 Timing Control Module #91238 to drive the stock LS1 Coil-on-Plug ignition system. LS2 applications require MSD's #6012 LS2 ignition controller (available through MSD Performance).

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 149 Products for Engine Intake Manifold.