Finish Selecting Your Vehicle

Choose your Engine for your 2001 Hyundai Santa Fe

  • 4 Cyl 2.4L
  • 6 Cyl 2.7L

Shop By Brand

The Following brands are available based on your search.

  • Accudrive Racks
    Accudrive Racks
  • Aisin
    Aisin
  • Atlantic Automotive Eng.
    Atlantic Automotive Eng.
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Flaming River
    Flaming River
  • Ford Racing
    Ford Racing
  • Mando
    Mando
  • Mapco
    Mapco
  • PWR
    PWR

Showing Products For 2001 Hyundai Santa Fe Rack and Pinion Assembly

Below are all the different brands and applications for 2001 Hyundai Santa Fe Rack and Pinion Assembly

Showing 1 - 10 of 19 Products for Rack and Pinion Assembly.

Refine Your Search

Cardone
2001 Hyundai Santa Fe Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-18A81BE    26-2413  Remanufactured

5771026200 , 5771026500 , 5778526200

Qty:
In Stock & Ready to Ship
$45.90 $200.14
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 3.56
    • Distance Between Mounting Holes (mm): 90.50
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.71
    • Input Shaft Diameter (mm): 18.01
    • Input Shaft Length (in): Not Available
    • Input Shaft Length (mm): Not Available
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M14 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 50.94
    • Rack Length (mm): 1293.83
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 45.82
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
2001 - Hyundai Santa Fe
Accudrive Racks
2001 Hyundai Santa Fe Rack and Pinion Assembly Accudrive Racks

P311-0BA8C7A    25645  New

Qty:
In Stock & Ready to Ship
$75.00 $216.96
  • Hyundia Santa Fe
  • Power Rack
Brand: Accudrive Racks
Additional Fitment Information:
Vehicle
2001 - Hyundai Santa Fe
Mapco
2001 Hyundai Santa Fe Rack and Pinion Assembly 4 Cyl 2.4L Mapco

P311-43907D3    9391M  Remanufactured

26-2413 , 3082 , 57710-26200

Qty:
In Stock & Ready to Ship
$150.00 $227.42
  • RACK AND PINION COMPLETE UNIT
Brand: Mapco
Additional Fitment Information:
Vehicle Block Engine CID CC
2001 - Hyundai Santa Fe L 4 Cyl 2.4L - 2351
PWR
2001 Hyundai Santa Fe Rack and Pinion Assembly 6 Cyl 2.7L PWR

P311-5D4A19C    42-2030  New

Qty:
In Stock & Ready to Ship
$450.10
PWR Rack and Pinion Assembly
  • New Hydraulic Power Rack and Pinion
  • Product Attributes:
    • End To End Length: 1294
    • Grade Type: Regular
    • Inlet Line Fitting Diameter: 14
    • Inlet Line Fitting Gender: Female
    • Inner Tie Rods Included: Yes
    • Mounting Brackets Included: No
    • Mounting Hardware Included: No
    • Mounting Hole Quantity: 2
    • Outer Tie Rods Included: No
    • Outlet Line Fitting Gender: Female
    • Steering Input Shaft Diameter: 18
  • Direct Fit - to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks & Gears are 100% tested for leaks, pressure, noise and function
Brand: PWR
Additional Fitment Information:
Vehicle Block Engine CID CC
2001 - Hyundai Santa Fe V 6 Cyl 2.7L - 2656
Aisin
2001 Hyundai Santa Fe Rack and Pinion Assembly Aisin

P311-3E63C50    SGK-028  New

26-2413 , 57710-26200 , 57710-26500 , SGK-028

Qty:
In Stock & Ready to Ship
$377.89
  • OE Power Rack and Pinion Assembly
  • Part Attribute 1 Does Not Include Outer Tie Rod End
  • Precision OE manufactured Power Steering Rack and Pinion
Brand: Aisin
Additional Fitment Information:
Vehicle
2001 - Hyundai Santa Fe
Mando
2001 Hyundai Santa Fe Rack and Pinion Assembly 4 Cyl 2.4L Mando - New Original Equipment

P311-07FA56D    14A1011  New

Qty:
In Stock & Ready to Ship
$369.79
Mando Rack and Pinion Assembly
  • New OE Steering Rack Pinion Aseembly, Direct Replacement
  • New Original Equipment
  • Rack & Pinion Assembly failures are usually associated with high mileage wear or power steering pump & fluid contamination, and usually shows signs of hydraulic fluid leak, abnormal tightness at the steering wheel, or sometimes even grinding noises during normal steering. Your vehicle’s power steering rack is imperative to provide the ability to safely and easily steer the car. Electronic Power Steering (EPS) units are becoming the modern day norm with auto manufacturers. Unlike a hydraulic power steering system, an EPS system relies on a computer-controlled electric motor to operate – no longer needing assistance from an additional pump, fluid, belt, or pulley. But failures do occur within EPS systems, and it is highly encouraged to have it diagnosed by a professional right away should your EPS warning light illuminate. Mando Aftermarket offers brand new OE replacements rack & pinion & EPS units that are exactly like the one that originally came with your Hyundai or Kia – We Are OE!
Brand: Mando
Additional Fitment Information:
Vehicle Block Engine CID CC
2001 - Hyundai Santa Fe L 4 Cyl 2.4L - 2351
Atlantic Automotive Eng.
2001 Hyundai Santa Fe Rack and Pinion Assembly Atlantic Automotive Eng. - w/o Outer Tie Rod Ends

P311-23D5395    W0133-2355464  New

Qty:
In Stock & Ready to Ship
$132.00 $420.00
Atlantic Automotive Eng. Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Complete with inner tie rods.
  • w/o Outer Tie Rod Ends
Brand: Atlantic Automotive Eng.
Additional Fitment Information:
Vehicle
2001 - Hyundai Santa Fe
Cardone
2001 Hyundai Santa Fe Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-365F214    97-2413  New

5771026200 , 5771026500

Qty:
In Stock & Ready to Ship
$557.37
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 3.54
    • Distance Between Mounting Holes (mm): 90.00
    • E-Waste: No
    • Features and Benefits:
      • Built To Meet Or Exceed O.e.m. Performance.
      • Computerized Spool Valve Balancing Ensures Exceptional Steering Feel.
      • Environmentally-friendly Coating Applied To Tie Rods And Lines To Provide A Clean Appearance And Prevent Rust.
      • Performance Testing Ensures Perfect Fit, Function And Reliable Performance.
      • Supplied With O.e.m. Grade Seals, O-rings And Boots To Provide Optimal Sealing Performance And Longevity.
    • Hose Port Type: O-ring/o-ring
    • Input Shaft Diameter (in): 0.65
    • Input Shaft Diameter (mm): 16.60
    • Input Shaft Length (in): 1.11
    • Input Shaft Length (mm): 28.20
    • Package Contents: Rack And Pinion, Kit, Tag, Insert, Instruction Sheet
    • Pressure Port Thread Size: M14 X 1.5
    • Product Condition: New
    • Rack Length (in): 25.12
    • Rack Length (mm): 638.00
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 49.00
    • Tie Rod Ends Included: Yes
  • CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed Original Equipment Manufacturer performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
2001 - Hyundai Santa Fe
Cardone
2001 Hyundai Santa Fe Rack and Pinion Assembly Cardone - w/o Outer Tie Rod Ends

P311-5264A1F    W0133-2264477  New

Qty:
In Stock & Ready to Ship
$55.00 $494.10
Cardone Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Complete with inner tie rods.
  • w/o Outer Tie Rod Ends
Brand: Cardone
Additional Fitment Information:
Vehicle
2001 - Hyundai Santa Fe
BBB Industries
2001 Hyundai Santa Fe Rack and Pinion Assembly BBB Industries - Reman Rack and Pinion

P311-5E726E6    313-0151  Remanufactured

19321149

Qty:
In Stock & Ready to Ship
$50.00 $208.94
BBB Industries Rack and Pinion Assembly
  • Power Steering
  • Reman Rack and Pinion
  • Product Attributes:
    • Bushings Included: Yes
    • Distance Between Mounting Holes (mm): 90.424
    • Hydraulic or Electric: Hydraulic
    • Inner Tie Rods Included: Yes
    • Input Shaft Diameter (mm): 17.463
    • Input Shaft Length (mm): 33.338
    • Mounting Hole Quantity: 2
    • Outer Tie Rods Included: No
    • Pressure Port Thread Size: M14x1.50
    • Rack Length (mm): 1295.4
    • Return Port Thread Size: M16x1.50
    • Turns Lock To Lock: 2.938
Brand: BBB Industries
Additional Fitment Information:
Vehicle
2001 - Hyundai Santa Fe

Showing 1 - 10 of 19 Products for Rack and Pinion Assembly.