Choose Vehicle Year

  1. Previous
  2. Home
  3. 2001
  4. GMC
  5. Yukon XL 1500
  6. Engine
  7. Engine Oil Pump

Finish Selecting Your Vehicle

Choose your Engine for your 2001 GMC Yukon XL 1500

  • 8 Cyl 5.3L
  • 8 Cyl 6.0L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Boundary Pumps
    Boundary Pumps
  • Earl's Performance
    Earl's Performance
  • Genuine
    Genuine
  • Melling
    Melling
  • Sealed Power
    Sealed Power

Showing Products For 2001 GMC Yukon XL 1500 Engine Oil Pump

Below are all the different brands and applications for 2001 GMC Yukon XL 1500 Engine Oil Pump

Showing 21 - 24 of 24 Products for Engine Oil Pump.

Refine Your Search

Earl's Performance
Engine Oil Pump Earl's Performance

P311-46057C2    502ERL  New

Qty:
In Stock & Ready to Ship
$191.90
Earl's Performance Engine Oil Pump
  • Billet Oil Thermostat
  • Billet Oil Thermostat; 0.75 in. -16 Center Post; 10AN Female O-Ring Seal; Sandwich Style; Aluminum;
  • Product Attributes:
    • Center Stud Diameter: 0.750 In. -16
    • Fully Open: 180
    • Inner O-Ring Diameter: 2.887 In.
    • O-Ring Cross Section: 0.139 In.
    • Outer O-Ring Diameter: 3.387 In.
    • Port Size: 0.875 In. -14 Female (-10 O-ring Boss)
    • Start to Open Temperature: 160 Degrees Farenheit
    • WARNING CA Proposition 65: No
  • Features:
    • Made For Most Typical Applications
    • Billet Aluminum Sandwich Style
    • Facilitate Quick Oil Warm-Up
  • These billet aluminum units facilitate quick oil warm up. Opening starts at 160*F (71.1C) and they are fully open at 180*F (82.2C).

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Earl's Performance
Additional Fitment Information:
Vehicle
Earl's Performance
Engine Oil Pump Earl's Performance

P311-0B34A78    501ERL  New

Qty:
In Stock & Ready to Ship
$190.76
Earl's Performance Engine Oil Pump
  • Oil Thermostat
  • Oil Thermostat; -10AN Female O-Ring Seal; Minimum 160 deg. F; Maximum 180 deg. F;
  • Product Attributes:
    • Dimensions: 4.000 In. X 4.000 In.
    • Fully Open: 180
    • Mount Hole Diameter: 0.250 In.
    • Port Size: 0.875 In. -14 Female (-10 O-ring Boss)
    • Start to Open Temperature: 160 Degrees Farenheit
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Billet Housing
    • Allows Monitoring Of Oil Temp
    • Flow And Pressure
    • Three Sensor Ports
    • Thermostat Design
    • Insures Quick
    • Controlled Warm-Up
  • To insure quick warm up under cold weather conditions, use our oil-stat. This uniquely designed product controls oil temperature like a thermostat controls water temperature in a radiator. Designed for passenger car and light truck usage with Earls Temp-A-Cure(TM) oil coolers. Billet 6061-T6 aircraft aluminum with three sensor ports.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Earl's Performance
Additional Fitment Information:
Vehicle
Genuine
2001 GMC Yukon XL 1500 Engine Oil Pump Genuine

P311-1B4D0A4    W0133-4217153  New

Qty:
In Stock & Ready to Ship
$215.83
Genuine Engine Oil Pump
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Genuine
Additional Fitment Information:
Vehicle
2001 - GMC Yukon XL 1500
Boundary Pumps
Engine Oil Pump Boundary Pumps

P311-4802786    BP-S1  New

Qty:
In Stock & Ready to Ship
$349.25
Boundary Pumps Engine Oil Pump
  • The Boundary BP oil pump starts with a fully torn down and inspected housing. This housing is then assembled with our billet oil pump gear and sealed. This pump also and comes with the option for a high flow billet backplate for those running over 7000 RPM consistently.
    All assembled billet pumps undergo the following:Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.Pump is hand de-burred.Our industry leading mirror finished gear set is usedStainless Torx heads replace the stock fastenersAll fasteners are torqued to specLoctite applied to fasteners to prevent back out or looseningAnaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.Assembly lubricant applied to all critical surfaces to get oil flowing fast on startupParts are blue printed and issued with specification sheet.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Boundary Pumps
Additional Fitment Information:
Vehicle

Showing 21 - 24 of 24 Products for Engine Oil Pump.