Finish Selecting Your Vehicle

Choose your Engine for your 2001 Audi S8

  • 8 Cyl 4.2L

Shop By Brand

The Following brands are available based on your search.

  • Apex
    Apex
  • Cometic Gasket
    Cometic Gasket
  • Corteco
    Corteco
  • FelPro
    FelPro
  • Ford Racing
    Ford Racing
  • Reinz
    Reinz
  • Sce Gaskets
    Sce Gaskets
  • Victor Gaskets
    Victor Gaskets
  • Victor Reinz
    Victor Reinz

Showing Products For 2001 Audi S8 Engine Cylinder Head Gasket

Below are all the different brands and applications for 2001 Audi S8 Engine Cylinder Head Gasket

Showing 1 - 100 of 182 Products for Engine Cylinder Head Gasket.

Refine Your Search

Victor Reinz
2001 Audi S8 Engine Cylinder Head Gasket - Left Victor Reinz

P311-3310962    W0133-1969514  New

Qty:
In Stock & Ready to Ship
$91.99
Victor Reinz Engine Cylinder Head Gasket  Left
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Cylinders 5-8
Brand: Victor Reinz
Position: Left
Additional Fitment Information:
Vehicle Position
2001 - Audi S8 Left
Victor Reinz
2001 Audi S8 Engine Cylinder Head Gasket - Right Victor Reinz

P311-4D8A057    W0133-1969513  New

Qty:
In Stock & Ready to Ship
$78.21
Victor Reinz Engine Cylinder Head Gasket  Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Cylinders 1-4
Brand: Victor Reinz
Position: Right
Additional Fitment Information:
Vehicle Position
2001 - Audi S8 Right
Apex
2001 Audi S8 Engine Cylinder Head Gasket - Left 8 Cyl 4.2L Apex

P311-592340D    AHG939L  New

Qty:
In Stock & Ready to Ship
$43.22
Brand: Apex
Position: Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Audi S8 Left V 8 Cyl 4.2L - 4172
Reinz
2001 Audi S8 Engine Cylinder Head Gasket - Right Reinz

P311-1BB84A1    61-33010-00  New

26628PT , 54670

Qty:
In Stock & Ready to Ship
$61.07
Reinz Engine Cylinder Head Gasket  Right
  • Engine Cylinder Head Gasket
  • Cylinders 1 Through 4 Requires Replacement without Cylinder Head Bolts
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Complete: Y
    • Contains Applications: Y
    • Release Wave: 08/31/2018
  • For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.
Brand: Reinz
Position: Right
Additional Fitment Information:
Vehicle Position
2001 - Audi S8 Right
Reinz
2001 Audi S8 Engine Cylinder Head Gasket - Left Reinz

P311-17A7D06    61-33020-00  New

26615PT , 54671

Qty:
In Stock & Ready to Ship
$61.07
Reinz Engine Cylinder Head Gasket  Left
  • Engine Cylinder Head Gasket
  • Requires Replacement without Cylinder Head Bolts
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Complete: Y
    • Contains Applications: Y
    • Release Wave: 08/31/2018
  • For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.
Brand: Reinz
Position: Left
Additional Fitment Information:
Vehicle Position
2001 - Audi S8 Left
Victor Gaskets
2001 Audi S8 Engine Cylinder Head Gasket - Right 8 Cyl 4.2L Victor Gaskets

P311-4C38598    54670  New

077 103 383 BN , 077 103 383 BS , 26628 PT

Qty:
In Stock & Ready to Ship
$51.31
Victor Gaskets Engine Cylinder Head Gasket  Right
  • Engine Cylinder Head Gasket
  • Multi-Layered Steel
  • Product Attributes:
    • Additional Package Contents: Head Gasket
    • Cylinder Bore Diameter:
      • 3.36
      • 85.22
    • Cylinder Head Gasket Material: Multi-layered Steel
    • Gasket Sealant Included: No
    • Item Grade: Oem Standard
    • Torque To Yield: Yes
  • MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Brand: Victor Gaskets
Position: Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Audi S8 Right V 8 Cyl 4.2L - 4172
Victor Gaskets
2001 Audi S8 Engine Cylinder Head Gasket - Left 8 Cyl 4.2L Victor Gaskets

P311-04F35D2    54671  New

077 103 383 AQ , 077 103 383 BP , 077 103 383 BT , 26615 PT

Qty:
In Stock & Ready to Ship
$55.44
Victor Gaskets Engine Cylinder Head Gasket  Left
  • Engine Cylinder Head Gasket
  • Multi-Layered Steel
  • Product Attributes:
    • Additional Package Contents: Head Gasket
    • Cylinder Bore Diameter:
      • 3.36
      • 85.24
    • Cylinder Head Gasket Material: Multi-layered Steel
    • Gasket Sealant Included: No
    • Item Grade: Oem Standard
    • Torque To Yield: Yes
  • MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Brand: Victor Gaskets
Position: Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Audi S8 Left V 8 Cyl 4.2L - 4172
FelPro
2001 Audi S8 Engine Cylinder Head Gasket - Right 8 Cyl 4.2L FelPro

P311-51C1544    26628 PT  New

077103383BS , 54670

Qty:
In Stock & Ready to Ship
$72.46
  • Head Gasket
  • Head Bolts Not Included Head Bolt Replacement Recommended ; PermaTorqueMLS
  • FEL-PRO 26628 PT Head Gasket
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Brand: FelPro
Position: Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2001 - Audi S8 Right V 8 Cyl 4.2L - 4172
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-07A1D42    C5635-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
  • GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.530in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-2BD52D3    C5764-051  New

Qty:
In Stock & Ready to Ship
$125.00
Cometic Gasket Engine Cylinder Head Gasket
  • GM L18 Vortec 8100 Gen-VII Big Block V8 Cylinder Head Gasket
  • GM L18 Vortec 8100 Gen-VII Big Block V8 .051in. MLS Cylinder Head Gasket; 4.280in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine 8.1l
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-1EC80FE    C5641-060  New

Qty:
In Stock & Ready to Ship
$135.70
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .060in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.060". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-046971A    C5641-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-246AE48    C5637-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
  • GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-30F793B    C5077-052  New

Qty:
In Stock & Ready to Ship
$145.42
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .052in. MLX Cylinder Head Gasket; 4.200in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-5F33216    C5076-040  New

Qty:
In Stock & Ready to Ship
$145.42
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.100in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-4A245D9    C5760-040  New

Qty:
In Stock & Ready to Ship
$124.28
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine 525/625 502 Gen-VI Big Block V8 Cylinder Head Gasket
  • GM/Mercury Marine 525/625 502 Gen-VI Big Block V8 .040in. MLS Cylinder Head Gasket; 4.470in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm Gen Ii/mark Vi 502ci V8 Mercury Marine 525/625
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-0F1FC2F    C5761-051  New

Qty:
In Stock & Ready to Ship
$125.00
Cometic Gasket Engine Cylinder Head Gasket
  • GM L18 Vortec 8100 Gen-VII Big Block V8 Cylinder Head Gasket
  • GM L18 Vortec 8100 Gen-VII Big Block V8 .051in. MLS Cylinder Head Gasket; 4.280in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine 8.1l
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". Right Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-5E75A56    C5743-045  New

Qty:
In Stock & Ready to Ship
$136.21
Cometic Gasket Engine Cylinder Head Gasket
  • Ford 460 Pro Stock V8 Cylinder Head Gasket
  • Ford 460 Pro Stock V8 .045in. MLS Cylinder Head Gasket; 4.600in. Bore; A460 Block
  • Product Attributes:
    • Engine Make/Size: Ford 460 Prostock V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.045". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-3DDC904    C15363-060  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM Dart LS Next V8 Cylinder Head Gasket
  • GM Dart LS Next V8 .060in. MLX Cylinder Head Gasket; 4.200in. Bore; LHS; 1/2in./3/8in. Stud Hole Combination
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Asbestos-Free Fiber Material
  • The HP shim technology increases clampload around the combustion chamber, thereby increasing the sealability of the head gasket around the open deck block.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-295352A    C15362-060  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Dart LS Next Block V8 Cylinder Head Gasket
  • GM/Dart LS Next Block V8 .060in. MLX Cylinder Head Gasket; 4.200in. Bore; RHS; 1/2in./3/8in. Stud Hole Combination
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Asbestos-Free Fiber Material
  • The HP shim technology increases clampload around the combustion chamber, thereby increasing the sealability of the head gasket around the open deck block.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-4E9D4F0    C5078-052  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .052in. MLX Cylinder Head Gasket; 4.200in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.036". World Products Man-o-War Block. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-2EAC8FF    C5639-040  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .040in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.530in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.040". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-569B9E9    C5935-051  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .051in. MLS Cylinder Head Gasket; 4.185in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". 18 Bolt Heads. Right Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-2EFCF2E    C5935-045  New

Qty:
In Stock & Ready to Ship
$113.10
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .045in. MLS Cylinder Head Gasket; 4.185in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.045". 18 Bolt Heads. Right Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-2DD55D7    C5636-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
  • GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.580in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-55B920F    C5579-040  New

Qty:
In Stock & Ready to Ship
$111.50
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.060in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-01F2E0E    C5638-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.500in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-2BC2391    C5703-052  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .052in. MLX Cylinder Head Gasket; 4.165in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.036". World Products Man-o-War Block. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-15206EB    C5075-040  New

Qty:
In Stock & Ready to Ship
$145.42
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.100in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-4E9B012    C4216-051  New

Qty:
In Stock & Ready to Ship
$116.48
Cometic Gasket Engine Cylinder Head Gasket
  • Opel 20XE/C20XE/C20LET Cylinder Head Gasket
  • Opel 20XE/C20XE/C20LET .051in. MLS Cylinder Head Gasket; 88mm Bore
  • Product Attributes:
    • Engine Make/Size: Vauxhall 20xe/c20xe/c20let 2.0l
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-0E5F0D3    C5324-040  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • GM SB2.2 Small Block V8 Cylinder Head Gasket
  • GM SB2.2 Small Block V8 .040in. MLS Cylinder Head Gasket; 4.200in. Bore; With Steam Holes
  • Product Attributes:
    • Engine Make/Size: Gm Sb2.2 Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
    • Coated On Both Sides w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". With Steam Holes. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-229830C    C5639-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.530in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-266EF3A    C5640-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.580in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-162F7C1    C5936-051  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .051in. MLS Cylinder Head Gasket; 4.185in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". 18 Bolt Heads. Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-16A5A40    C5936-045  New

Qty:
In Stock & Ready to Ship
$113.10
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .045in. MLS Cylinder Head Gasket; 4.185in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.045". 18 Bolt Heads. Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-1F5B30E    C5640-040  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .040in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.580in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.040". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-5B37DF8    C5934-051  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .051in. MLS Cylinder Head Gasket; 4.125in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". 18 Bolt Heads. Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-12A9075    C5936-040  New

Qty:
In Stock & Ready to Ship
$113.10
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .040in. MLS Cylinder Head Gasket; 4.185in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". 18 Bolt Heads. Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-3E906F3    C5466-040  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.200in. Bore; W2 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8 Race Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". Use with W2 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-06B5042    C5634-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
  • GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.500in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-1F3E134    C5634-040  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
  • GM/Mercury Marine Big Block V8 Gen-IV/V/VI .040in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.500in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.040". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-0BFE3AF    C5702-040  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.165in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Utilizes Integrated Stopper Layer For Combustion Chamber Sealing
    • Improved Clamp Load Around The Cylinder
    • Requires No Sealants Or Re-Torque
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". 18 Bolt Heads. Right Side. Cometic MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-544C02F    C5703-040  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.165in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Utilizes Integrated Stopper Layer For Combustion Chamber Sealing
    • Improved Clamp Load Around The Cylinder
    • Requires No Sealants Or Re-Torque
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". 18 Bolt Heads. Left Side. Cometic MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-4508F34    C5581-040  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.165in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-41B76FA    C5582-040  New

Qty:
In Stock & Ready to Ship
$113.10
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.185in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-33DB894    C5702-052  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .052in. MLX Cylinder Head Gasket; 4.165in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.036". World Products Man-o-War Block. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Sce Gaskets
Engine Cylinder Head Gasket Sce Gaskets

P311-1BDD228    T191643R  New

Qty:
In Stock & Ready to Ship
$126.43
  • CHEVROLET/GM LS/LSX/LS7X 4.160 X .043 TITAN COPPER HD GSKT R
  • CHEVROLET/GM LS/LSX/LS7X 4.160 X .043 TITAN COPPER HD GSKT R
  • Product Attributes:
    • Title: Chevrolet/gm Ls/lsx/ls7x 4.160 X .043 Titan Copper Hd Gskt R

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Sce Gaskets
Additional Fitment Information:
Vehicle
Sce Gaskets
Engine Cylinder Head Gasket Sce Gaskets

P311-1D928E0    T191643L  New

Qty:
In Stock & Ready to Ship
$126.43
  • CHEVROLET/GM LS/LSX/LS7X 4.160 X .043 TITAN COPPER HD GSKT L
  • CHEVROLET/GM LS/LSX/LS7X 4.160 X .043 TITAN COPPER HD GSKT L
  • Product Attributes:
    • Title: Chevrolet/gm Ls/lsx/ls7x 4.160 X .043 Titan Copper Hd Gskt L

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Sce Gaskets
Additional Fitment Information:
Vehicle
Sce Gaskets
Engine Cylinder Head Gasket Sce Gaskets

P311-46AC3C3    T135293  New

Qty:
In Stock & Ready to Ship
$147.63
  • CHEVROLET BB MK 4 4.520 X .093 TITAN COPPER HD GSKT
  • CHEVROLET BB MK 4 4.520 X .093 TITAN COPPER HD GSKT
  • Product Attributes:
    • Title: Chevrolet Bb Mk 4 4.520 X .093 Titan Copper Hd Gskt

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Sce Gaskets
Additional Fitment Information:
Vehicle
Sce Gaskets
Engine Cylinder Head Gasket Sce Gaskets

P311-3BA150B    S644450  New

Qty:
In Stock & Ready to Ship
$156.82
  • CHRYSLER 383-440 4.440 X .050 ICS TITAN COPPER HD GSKT
  • CHRYSLER 383-440 4.440 X .050 ICS TITAN COPPER HD GSKT
  • Product Attributes:
    • Title: Chrysler 383-440 4.440 X .050 Ics Titan Copper Hd Gskt

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Sce Gaskets
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-59769FC    1000  New

20596ED , 20598CS , 25500006 , 55306 , 55306CS , 55306HGGC , 8167G

Qty:
In Stock & Ready to Ship
$58.10
  • Head Gasket
  • FEL-PRO 1000 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.020
    • Combustion Chamber Volume (cc): 8.20
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 196, 231, 231 Stage I, 231 Stage Ii, 252
    • Engine Family: Buick V6
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-5745D49    1002  New

14011079 , 14097272 , 55015CS , 55015HGGC , 55060CS , 55060HG , 55060HGGC , 5782 , 7035M , HG32680HT

Qty:
In Stock & Ready to Ship
$67.35
  • Head Gasket
  • FEL-PRO 1002 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.166
    • Combustion Chamber Volume (cc): 9.10
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 229 (3.8l), 262 (4.3l)
    • Engine Family: Chevrolet V6
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-159C8AF    1003  New

1052 , 1057 , 1110 , 1134 , 14011041 , 20312CS , 2900 , 55019CS , 55019HGSS , 55063HG , 55312 , 55312CS , 55312HG , 55312HGGC , 6360 , 6631M , HG31000HT

Qty:
In Stock & Ready to Ship
$59.97
  • Head Gasket
  • FEL-PRO 1003 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads
    • Bore Size (in.): 4.166
    • Combustion Chamber Volume (cc): 9.10
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, 400 Race
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Can Be Used On 400 Race Engs.; Up To 4.155" Max. Bore W/minimal Chamfer; Can Be Used On Aluminum Blocks W/liners; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4D32581    1004  New

1178SCR , 2901 , 55431 , 55431CS , 55431HGGC , 55431XCS , 55656HGGC , 5701 , 5727 , 6361 , 6631M

Qty:
In Stock & Ready to Ship
$53.77
  • Head Gasket
  • FEL-PRO 1004 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads
    • Bore Size (in.): 4.190
    • Combustion Chamber Volume (cc): 9.20
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, 400 Race
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Can Be Used On 400 Race Engs.; Can Be Used On Aluminum Blocks W/liners; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-5ADBD87    1006  New

54293

Qty:
In Stock & Ready to Ship
$110.93
  • Head Gasket
  • FEL-PRO 1006 Head Gasket
  • Product Attributes:
    • Application Notes: For Severe Duty Such As Nitrous Or Turbos
    • Bore Size (in.): 4.145
    • Combustion Chamber Volume (cc): 8.70
    • Combustion Seal Design: Loc Wire® Copper Wire
    • Engine Displacement: 260, 289, 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Requires Precision Machined Receiver Groove In Head
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4133F6F    1008  New

1124 , 2224 , 55328CS , 55329 , 55329CS , 55329HG , 5705 , 5735 , 5805 , 5961SC , 6366 , 6911M , HG31030HT , P4349556

Qty:
In Stock & Ready to Ship
$54.54
  • Head Gasket
  • FEL-PRO 1008 Head Gasket
  • Product Attributes:
    • Application Notes: All
    • Bore Size (in.): 4.180
    • Combustion Chamber Volume (cc): 8.90
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 273, 318la, 340, 360
    • Engine Family: Chrysler V8 Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Chrysler Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4C269E4    1009  New

1120 , 1135 , 2906 , 54280 , 55331CS , 55655HG , 55655HGGC , 5784 , 6368 , 6810M , HG31130HT , P4349558

Qty:
In Stock & Ready to Ship
$71.57
  • Head Gasket
  • FEL-PRO 1009 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.410
    • Combustion Chamber Volume (cc): 9.90
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 361, 383, 400, 413, 426 Wedge, 440
    • Engine Family: Chrysler V8 Big Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Chrysler Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-428E8B1    1010  New

1134 , 54108SCR , 5700 , 5703 , 5800 , 5803

Qty:
In Stock & Ready to Ship
$62.64
  • Head Gasket
  • FEL-PRO 1010 Head Gasket
  • Product Attributes:
    • Application Notes: Suitable For 1986-91 Corvette W/aluminum Heads
    • Bore Size (in.): 4.166
    • Combustion Chamber Volume (cc): 8.90
    • Combustion Seal Design: Pre-flattened Copper Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, 400 Race
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Can Be Used On 400 Race Engs.; Can Be Used On Aluminum Blocks W/liners; Up To 4.155" Max. Bore W/minimal Chamfer; No Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-5006B1E    1011-1  New

2214 , 54292 , 55326CS , 55326HGGC , 55326LH , 55326RH , 55336HG , 5707 , 5751 , 5807 , 5956SC , E2ZZ6051A , HG32841HT

Qty:
In Stock & Ready to Ship
$48.66
  • Head Gasket
  • FEL-PRO 1011-1 Head Gasket
  • Product Attributes:
    • Application Notes: 1962-82
    • Bore Size (in.): 4.100
    • Combustion Chamber Volume (cc): 9.00
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 260, 289, 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4FF1118    1011-2  New

3428SCR

Qty:
In Stock & Ready to Ship
$48.67
  • Head Gasket
  • FEL-PRO 1011-2 Head Gasket
  • Product Attributes:
    • Application Notes: 1983-95
    • Bore Size (in.): 4.100
    • Combustion Chamber Volume (cc): 8.50
    • Combustion Seal Design: Pre-flattened Copper Wire
    • Engine Displacement: 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: No Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-41A36C6    1012  New

HG31170HT

Qty:
In Stock & Ready to Ship
$109.87
  • Head Gasket
  • FEL-PRO 1012 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads - For Severe Duty Such As Nitrous Or Turbos - Suitable For Marine Applications
    • Bore Size (in.): 4.640
    • Combustion Chamber Volume (cc): 10.90
    • Combustion Seal Design: Loc Wire® Steel Wire
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Stainless Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Machined Receiver Groove In Head Req'd; Round Bore; May Not Fit Some Cyl. Head Valve Pockets; Fits Gen Iv, V, Vi Car, Trk, Bow Tie, Hp Block; Pre-1971 Blocks May Req Mods; 1 Coolant Hole Per End; 3 Lower Coolant Holes; Has .510" Bolt Holes
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-40A0BD9    1013  New

3502SCR , 55315 , 55315CS , 55315HG , 55315HGGC , 5708 , 5757 , 5808 , 6870M , D3ZZ6051A , D4AZ6051A , HG31090HT

Qty:
In Stock & Ready to Ship
$61.38
  • Head Gasket
  • FEL-PRO 1013 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.100
    • Combustion Chamber Volume (cc): 9.20
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 351 Boss Cleveland, 351c Cleveland, 351cj Cleveland, 351m Modified, 400
    • Engine Family: Ford V8 Cleveland/modified Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-5A728FB    1014  New

54198 , 55431HG , 5728 , HG31250HT

Qty:
In Stock & Ready to Ship
$56.03
  • Head Gasket
  • FEL-PRO 1014 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads - Suitable For Marine Applications
    • Bore Size (in.): 4.200
    • Combustion Chamber Volume (cc): 9.00
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, 400 Race
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Stainless Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Can Be Used On 400 Race Engs.; Steam Holes For 400 Engs.; Street Use; Can Be Used On Aluminum Blocks W/liners; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-364909C    1016  New

2218 , 55668HG , 5810 , 6370 , 6885M , HG31320HT

Qty:
In Stock & Ready to Ship
$67.49
  • Head Gasket
  • FEL-PRO 1016 Head Gasket
  • Product Attributes:
    • Application Notes: Exc. 326, 350 Engs.
    • Bore Size (in.): 4.300
    • Combustion Chamber Volume (cc): 9.40
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 389, 400, 400 Ram Air, 400 Ram Air Iv, 421, 428, 455, 455 H.o., 455 Super Duty
    • Engine Family: Pontiac V8
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-1501856    1017-1  New

3969865 , 3976081 , 5362 , 5363 , 54366 , 55353HG , 55353HGGC , 55354HG , 5702 , 5733 , 7031M

Qty:
In Stock & Ready to Ship
$70.47
  • Head Gasket
  • FEL-PRO 1017-1 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads
    • Bore Size (in.): 4.540
    • Combustion Chamber Volume (cc): 10.50
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Fits Gen Iv Truck And Bow Tie Block; Does Not Fit Gen V Block; Does Not Fit Gen Vi Block; Two Coolant Holes Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4F97694    1017-2  New

Qty:
In Stock & Ready to Ship
$104.60
  • Head Gasket
  • FEL-PRO 1017-2 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads
    • Bore Size (in.): 4.540
    • Combustion Chamber Volume (cc): 13.70
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Extra Thick For Reduced Compression And Piston-valve Clearance; Fits Gen Iv Car, Trk, Hp Block; Does Not Fit Gen V, Vi Block; 2 Coolant Holes Per End; 3 Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.051
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-2FE3D4E    1018  New

2909 , 55386HGGC , 5709 , 5809 , 6373 , 6875M , C8SZ6051A , D4TZ6051A , E3HZ6051A , HG32410HT

Qty:
In Stock & Ready to Ship
$52.53
  • Head Gasket
  • FEL-PRO 1018 Head Gasket
  • Product Attributes:
    • Application Notes: Production Based Heads - No Steam Holes
    • Bore Size (in.): 4.500
    • Combustion Chamber Volume (cc): 11.20
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 429, 429cj, 429scj, 460
    • Engine Family: Ford V8 Big Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-2BB82C9    1020  New

1115 , 1116 , 55386CS , 55386HG , 5760 , 5790 , 5959SC , E7ZM6051A427 , HG31080HT

Qty:
In Stock & Ready to Ship
$67.18
  • Head Gasket
  • FEL-PRO 1020 Head Gasket
  • Product Attributes:
    • Application Notes: Exc. 352 Engs.
    • Bore Size (in.): 4.400
    • Combustion Chamber Volume (cc): 10.10
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 360, 390, 390gt, 406, 427, 428, 428cj, 428scj
    • Engine Family: Ford V8 Fe Big Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-2FD4C23    1021  New

54295 , 5755 , 6794M , C9ZE6051C , C9ZZ6051A , C9ZZ6051C , D1ZZ6051B

Qty:
In Stock & Ready to Ship
$65.61
  • Head Gasket
  • FEL-PRO 1021 Head Gasket
  • Product Attributes:
    • Application Notes: 351w Svo Engs.
    • Bore Size (in.): 4.100
    • Combustion Chamber Volume (cc): 9.20
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 302, 302 Boss/eliminator, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-41B33A7    1022  New

5758 , E5ZM6083B341

Qty:
In Stock & Ready to Ship
$76.39
  • Head Gasket
  • FEL-PRO 1022 Head Gasket
  • Product Attributes:
    • Application Notes: 351w Svo Engs. - L.h.
    • Bore Size (in.): 4.150
    • Combustion Chamber Volume (cc): 9.50
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-46AAD80    1023  New

5759 , E5ZM6051B341

Qty:
In Stock & Ready to Ship
$75.10
  • Head Gasket
  • FEL-PRO 1023 Head Gasket
  • Product Attributes:
    • Application Notes: 351w Svo Engs. - R.h.
    • Bore Size (in.): 4.150
    • Combustion Chamber Volume (cc): 9.50
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-345EFAA    1024  New

55006CS , 55006HG , 55006HGGC , 5786

Qty:
In Stock & Ready to Ship
$82.31
  • Head Gasket
  • FEL-PRO 1024 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.180
    • Combustion Chamber Volume (cc): 8.90
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 240, 300
    • Engine Family: Ford L6
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-29E21A2    1025  New

55002CS , 55002HG , 55002HGGC , 5785

Qty:
In Stock & Ready to Ship
$78.16
  • Head Gasket
  • FEL-PRO 1025 Head Gasket
  • Product Attributes:
    • Application Notes: 1962-84
    • Bore Size (in.): 4.166
    • Combustion Chamber Volume (cc): 9.10
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 194, 230, 250, 292
    • Engine Family: Chevrolet L6
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-1C5540B    1027  New

5730 , 5950SC , 7031G

Qty:
In Stock & Ready to Ship
$82.89
  • Head Gasket
  • FEL-PRO 1027 Head Gasket
  • Product Attributes:
    • Application Notes: Aluminum Heads
    • Bore Size (in.): 4.370
    • Combustion Chamber Volume (cc): 9.70
    • Combustion Seal Design: Pre-flattened Copper Wire
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Fits Gen Iv Truck And Bow Tie Block; Does Not Fit Gen V Block; Does Not Fit Gen Vi Block; Two Coolant Holes Per End; Three Lower Coolant Holes; No Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-0911B8D    1031 L  New

5947SC

Qty:
In Stock & Ready to Ship
$81.40
  • Head Gasket
  • FEL-PRO 1031 L Head Gasket
  • Product Attributes:
    • Application Notes: 351w Svo Engs. - L.h. - Smaller Valve Pockets Than Part No. 1022
    • Bore Size (in.): 4.150
    • Combustion Chamber Volume (cc): 9.40
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-38EE7E3    1031 R  New

5948SC

Qty:
In Stock & Ready to Ship
$81.40
  • Head Gasket
  • FEL-PRO 1031 R Head Gasket
  • Product Attributes:
    • Application Notes: 351w Svo Engs. - R.h. - Smaller Valve Pockets Than Part No. 1023
    • Bore Size (in.): 4.150
    • Combustion Chamber Volume (cc): 9.40
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-14EDC79    1032  New

5724 , 5954SC

Qty:
In Stock & Ready to Ship
$75.10
  • Head Gasket
  • FEL-PRO 1032 Head Gasket
  • Product Attributes:
    • Application Notes: 1987-89 262 Engs. - W/oversize Bore
    • Bore Size (in.): 4.200
    • Combustion Chamber Volume (cc): 9.20
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 262 (4.3l)
    • Engine Family: Chevrolet V6
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-1A349A2    1034  New

55656HG , 5729 , 5944SC , 5945SC , HG31251HT

Qty:
In Stock & Ready to Ship
$68.75
  • Head Gasket
  • FEL-PRO 1034 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads
    • Bore Size (in.): 4.200
    • Combustion Chamber Volume (cc): 9.30
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, 400 Race
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Can Be Used On 400 Race Engs.; Can Be Used On Aluminum Blocks W/liners; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4AE79CA    1035  New

54302

Qty:
In Stock & Ready to Ship
$66.80
  • Head Gasket
  • FEL-PRO 1035 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 3.930
    • Combustion Chamber Volume (cc): 8.50
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: (2.3l) Sohc 140
    • Engine Family: Ford L4
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-40CE513    1036  New

Qty:
In Stock & Ready to Ship
$125.05
  • Head Gasket
  • FEL-PRO 1036 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads
    • Bore Size (in.): 4.250
    • Combustion Chamber Volume (cc): 11.90
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, 400 Race
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Extra Large Bore; Extra Thick To Reduce Compression And Correct Piston-valve Clearance Problems; Can Be Used On 400 Race Engs.; Can Be Used On Aluminum Blocks W/liners; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.051
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-082DAB8    1037  New

2713218 , 54269 , 5732

Qty:
In Stock & Ready to Ship
$72.98
  • Head Gasket
  • FEL-PRO 1037 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads - Suitable For Marine Applications
    • Bore Size (in.): 4.370
    • Combustion Chamber Volume (cc): 9.70
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Stainless Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-467BF47    1039  New

Qty:
In Stock & Ready to Ship
$91.33
  • Head Gasket
  • FEL-PRO 1039 Head Gasket
  • Product Attributes:
    • Application Notes: Wedge And Hemi - Extra Large Bore - Modifications Required To Fit Hemi
    • Bore Size (in.): 4.590
    • Combustion Chamber Volume (cc): 13.70
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 361, 383, 400, 413, 426 Hemi, 426 Wedge, 440
    • Engine Family: Chrysler V8 Big Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Chrysler Performance
    • Product Notes: Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.051
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-2406973    1041  New

Qty:
In Stock & Ready to Ship
$115.53
  • Head Gasket
  • FEL-PRO 1041 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.135
    • Combustion Chamber Volume (cc): 9.40
    • Combustion Seal Design: Pre-flattened Copper Wire
    • Engine Displacement: (4.8l) 293, (5.3l) 325 (truck Block Based), (5.7l) 346, (5.7l) 383 Stroker, (6.0l) 364, (6.0l) 369 Stroker, (6.0l) 402 Stroker, (6.2l) 378, (7.0l) 427, Aftermarket Performance Block
    • Engine Family: Chevrolet V8 Ls Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: No Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-451B549    1043  New

Qty:
In Stock & Ready to Ship
$72.28
  • Head Gasket
  • FEL-PRO 1043 Head Gasket
  • Product Attributes:
    • Application Notes: Small Chambered Aluminum Race Heads And Some Vortec Engs. - Will Not Fit Conventional Oem-type Combustion Chambers
    • Bore Size (in.): 4.080
    • Combustion Chamber Volume (cc): 8.20
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Do Not Use On 400 Engs.; Do Not Use On Aluminum Blocks W/liners; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-3D8444D    1044  New

20312ED

Qty:
In Stock & Ready to Ship
$87.02
  • Head Gasket
  • FEL-PRO 1044 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads
    • Bore Size (in.): 4.200
    • Combustion Chamber Volume (cc): 11.20
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, 400 Race
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Extra Thick To Reduce Compression And Correct Piston-valve Clearance Problems; Can Be Used On 400 Race Engs.; Steam Holes For 400 Engs.; Street Use; Can Be Used On Aluminum Blocks W/liners; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.051
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-187FEDA    1045  New

5801

Qty:
In Stock & Ready to Ship
$114.07
  • Head Gasket
  • FEL-PRO 1045 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads - For Severe Duty Such As Nitrous Or Turbos - Suitable For Marine Applications
    • Bore Size (in.): 4.180
    • Combustion Chamber Volume (cc): 9.00
    • Combustion Seal Design: Loc Wire® Steel Wire
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, 400 Race
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Stainless Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Requires Precision Machined Receiver Groove In Head; Can Be Used On 400 Race Engs.; Steam Holes For 400 Engs.; Street Use; Can Be Used On Aluminum Blocks W/liners
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-1805F2A    1046  New

54121SCR

Qty:
In Stock & Ready to Ship
$125.84
  • Head Gasket
  • FEL-PRO 1046 Head Gasket
  • Product Attributes:
    • Application Notes: 351w Svo Engs. - Extra Large Bore
    • Bore Size (in.): 4.200
    • Combustion Chamber Volume (cc): 11.70
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: Extra Thick To Reduce Compression And Correct Piston-valve Clearance Problems; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.051
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-5C4A710    1047  New

27811546 , 54270 , 54366 , 5804 , 5949SC

Qty:
In Stock & Ready to Ship
$66.51
  • Head Gasket
  • FEL-PRO 1047 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads - Suitable For Marine Applications
    • Bore Size (in.): 4.540
    • Combustion Chamber Volume (cc): 10.50
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Stainless Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4089CAC    1057  New

5367 , 5369 , 54228SC , 54268 , 5731 , 5946SC

Qty:
In Stock & Ready to Ship
$79.96
  • Head Gasket
  • FEL-PRO 1057 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads - Extra Large Bore - Not Recommended For Eng. Bores 4.625" Or Larger
    • Bore Size (in.): 4.630
    • Combustion Chamber Volume (cc): 11.30
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Fits Gen Iv Truck And Bow Tie Block; Does Not Fit Gen V Block; Does Not Fit Gen Vi Block; Two Coolant Holes Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-2A737DC    1067  New

54271

Qty:
In Stock & Ready to Ship
$77.84
  • Head Gasket
  • FEL-PRO 1067 Head Gasket
  • Product Attributes:
    • Application Notes: Cast Iron Or Aluminum Heads - Extra Large Bore - Not Recommended For Eng. Bores 4.625" Or Larger - Suitable For Marine Applications
    • Bore Size (in.): 4.630
    • Combustion Chamber Volume (cc): 11.30
    • Combustion Seal Design: Pre-flattened Steel Wire
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Stainless Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-5F599D2    1071-041  New

Qty:
In Stock & Ready to Ship
$123.35
  • Head Gasket
  • FEL-PRO 1071-041 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.380
    • Combustion Chamber Volume (cc): 10.60
    • Combustion Seal Design: Mls Bore Bead
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Permatorquemls® Multi-layer Steel
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-2A7C4CD    1071-053  New

Qty:
In Stock & Ready to Ship
$148.18
  • Head Gasket
  • FEL-PRO 1071-053 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.380
    • Combustion Chamber Volume (cc): 13.70
    • Combustion Seal Design: Mls Bore Bead
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Permatorquemls® Multi-layer Steel
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.053
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-213F25C    1074  New

54257 , 5715

Qty:
In Stock & Ready to Ship
$66.16
  • Head Gasket
  • FEL-PRO 1074 Head Gasket
  • Product Attributes:
    • Application Notes: Lt-1 And Lt-4 Engs. - Used In Late-model Corvette, Camaro, Firebird, Impala Ss - Suitable For Marine Applications
    • Bore Size (in.): 4.125
    • Combustion Chamber Volume (cc): 8.70
    • Combustion Seal Design: Pre-flattened Copper Wire
    • Engine Displacement: 350 Lt-1, 350 Lt-4
    • Engine Family: Chevrolet V8 Small Block
    • Materials/Construction: Stainless Steel Core Laminate
    • Mfg.: Gm Performance
    • Product Notes: No Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-5AC4FBF    1075-041  New

Qty:
In Stock & Ready to Ship
$125.44
  • Head Gasket
  • FEL-PRO 1075-041 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.580
    • Combustion Chamber Volume (cc): 11.20
    • Combustion Seal Design: Mls Bore Bead
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Permatorquemls® Multi-layer Steel
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-2CA9D32    1075-053  New

Qty:
In Stock & Ready to Ship
$154.45
  • Head Gasket
  • FEL-PRO 1075-053 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.580
    • Combustion Chamber Volume (cc): 14.50
    • Combustion Seal Design: Mls Bore Bead
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Permatorquemls® Multi-layer Steel
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.053
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-1CDAFA9    1077-041  New

Qty:
In Stock & Ready to Ship
$129.75
  • Head Gasket
  • FEL-PRO 1077-041 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.640
    • Combustion Chamber Volume (cc): 11.40
    • Combustion Seal Design: Mls Bore Bead
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Permatorquemls® Multi-layer Steel
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.041
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-065AAA7    1077-053  New

Qty:
In Stock & Ready to Ship
$149.21
  • Head Gasket
  • FEL-PRO 1077-053 Head Gasket
  • Product Attributes:
    • Bore Size (in.): 4.640
    • Combustion Chamber Volume (cc): 14.80
    • Combustion Seal Design: Mls Bore Bead
    • Engine Displacement: 396, 402, 427, 454, 502, 510, 540, 572
    • Engine Family: Chevrolet V8 Big Block
    • Materials/Construction: Permatorquemls® Multi-layer Steel
    • Mfg.: Gm Performance
    • Product Notes: Fits Gen Iv Pass. Car And H/p Block; Pre-1971 Blocks May Require Modification; Fits Gen Iv Truck And Bow Tie Block; Fits Gen V Block; Fits Gen Vi Block; One Coolant Hole Per End; Three Lower Coolant Holes; Minimal Brinelling Of Aluminum Heads
    • Thickness (in.): 0.053
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-1F4F7DB    C5744-045  New

Qty:
In Stock & Ready to Ship
$136.21
Cometic Gasket Engine Cylinder Head Gasket
  • Ford 460 Pro Stock V8 Cylinder Head Gasket
  • Ford 460 Pro Stock V8 .045in. MLS Cylinder Head Gasket; 4.685in. Bore; A460 Block
  • Product Attributes:
    • Engine Make/Size: Ford 460 Prostock V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.045". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-0488D29    C5935-040  New

Qty:
In Stock & Ready to Ship
$113.10
Cometic Gasket Engine Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .040in. MLS Cylinder Head Gasket; 4.185in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". 18 Bolt Heads. Right Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-1FAEE6E    C5636-080  New

Qty:
In Stock & Ready to Ship
$135.70
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
  • GM/Mercury Marine Big Block V8 Gen-IV/V/VI .080in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.580in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
    • Coated On Both Sides w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.098". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle

Showing 1 - 100 of 182 Products for Engine Cylinder Head Gasket.