Finish Selecting Your Vehicle

Choose your Engine for your 2000 Nissan Altima

  • 4 Cyl 2.4L

Shop By Brand

The Following brands are available based on your search.

  • Atlantic Automotive Enterprise
    Atlantic Automotive Enterprise
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Flaming River
    Flaming River
  • Ford Racing
    Ford Racing
  • Mapco
    Mapco
  • Maval
    Maval

Showing Products For 2000 Nissan Altima Rack and Pinion Assembly

Below are all the different brands and applications for 2000 Nissan Altima Rack and Pinion Assembly

Showing 1 - 10 of 15 Products for Rack and Pinion Assembly.

Refine Your Search

Cardone
2000 Nissan Altima Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-3B23F2B    26-3012  Remanufactured

485212B026 , 485219E000 , 490010Z800

Qty:
In Stock & Ready to Ship
$9.90 $235.64
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 0.00
    • Distance Between Mounting Holes (mm): 0.00
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.74
    • Input Shaft Diameter (mm): 18.72
    • Input Shaft Length (in): 1.06
    • Input Shaft Length (mm): 27.00
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M14 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 46.81
    • Rack Length (mm): 1189.05
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 55.70
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
2000 - Nissan Altima
Maval
2000 Nissan Altima Rack and Pinion Assembly Maval - w/o Outer Tie Rod Ends

P311-59F5219    W0133-1722751  New

Qty:
In Stock & Ready to Ship
$170.00 $443.98
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle
2000 - Nissan Altima
Mapco
2000 Nissan Altima Rack and Pinion Assembly Mapco

P311-3EC6021    9314M  Remanufactured

26-3012 , 3651 , 49001-9E000

Qty:
In Stock & Ready to Ship
$150.00 $260.83
  • RACK AND PINION COMPLETE UNIT
Brand: Mapco
Additional Fitment Information:
Vehicle
2000 - Nissan Altima
Atlantic Automotive Enterprise
2000 Nissan Altima Rack and Pinion Assembly 4 Cyl 2.4L Atlantic Automotive Enterprise - Remanufactured Rack and Pinion Complete Unit

P311-5BFF169    3651  New

Qty:
In Stock & Ready to Ship
$100.00 $271.00
Atlantic Automotive Enterprise Rack and Pinion Assembly
  • AAE Remanufactured Hydraulic Power Steering Rack & Pinion 100% Tested
  • Reman.
  • Remanufactured Rack and Pinion Complete Unit
  • Product Attributes:
    • Bullet Point 1: Manufactured Again Certified Quality Process
    • Bullet Point 2: Each Unit Is 100% Hydraulically Tested For Pressure And Flow.
    • Bullet Point 3: Racks Are Remanufactured With Oe Grade, High Temperature Seals And O-rings For Increased Durability And Performance.
    • Bullet Point 4: Each Unit Is Electrostatically Painted With Automotive Grade Paint, Ensuring Long Lasting Finish Protecting The Unit In Any Driving Condition.
    • Bullet Point 5: Racks Are Supplied With Inner Tie Rods, New Bellows Secured By Oe Stainless Steel Clamps To Keep Dirt And Debris Out, Preventing Premature Failure.
    • Link to Manufacturer Page: Www.aaesteering.com
    • Warranty Distance: 24000
    • Warranty Distance UOM: Mi
    • Warranty Time UOM: Mo
  • AAE Remanufactured Hydraulic Power Steering Rack & Pinions include inner tie rods and new bellows secured by OE stainless steel clamps. AAE remanufactures all units in the USA. AAE uses only the highest quality OE components in our remanufacturing process and each unit undergoes a thorough inspection & testing procedure. Every unit is 100% tested to the strictest standards in the industry to ensure the customer is purchasing a quality product. Each unit is electrostatically painted with automotive grade paint to ensure long lasting finish to protect the unit in any driving condition. To ensure long life and OE performance & operation, please flush and fill steering system with OE approved power steering fluid.
Brand: Atlantic Automotive Enterprise
Additional Fitment Information:
Vehicle Block Engine CID CC
2000 - Nissan Altima L 4 Cyl 2.4L - 2389
BBB Industries
2000 Nissan Altima Rack and Pinion Assembly BBB Industries - Reman Rack and Pinion

P311-2558A2E    310-0146  Remanufactured

19320891

Qty:
In Stock & Ready to Ship
$110.00 $256.98
BBB Industries Rack and Pinion Assembly
  • Power Steering
  • Reman Rack and Pinion
  • Product Attributes:
    • Bushings Included: No
    • Hydraulic or Electric: Hydraulic
    • Inner Tie Rods Included: Yes
    • Input Shaft Diameter (mm): 19.05
    • Input Shaft Length (mm): 41.275
    • Outer Tie Rods Included: No
    • Pressure Port Thread Size: M14x1.50
    • Rack Length (mm): 1193.8
    • Return Port Thread Size: M16x1.50
    • Turns Lock To Lock: 2.813
Brand: BBB Industries
Additional Fitment Information:
Vehicle
2000 - Nissan Altima
Flaming River
Rack and Pinion Assembly Flaming River

P311-59D357B    FR1501  New

Qty:
In Stock & Ready to Ship
$376.01
Flaming River Rack and Pinion Assembly
  • 1971-72 Pinto Manual Rack and Pinion
  • Rack and Pinion: Pinto 1971-1972 Manual
  • Product Attributes:
    • Bar CodePart No.: Fr1501
    • Rack Length: Standard
    • Title: Flaming River Pinto Manual Rack
  • This manual rack and pinion is designed to meet top chassis builders standards for a new drag race steering gear. Manufactured to be sleek, lightweight and durable using high-quality, aluminum castings and chromed plated steel center tube.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-1B87615    FR1501-2  New

Qty:
In Stock & Ready to Ship
$567.33
Flaming River Rack and Pinion Assembly
  • 1971-72 Pinto 5 Narrowed Rack and Pinion with Bronze Bushing
  • Rack and Pinion: Narrowed Pinto R/P
  • Product Attributes:
    • Bar CodePart No.: Fr1501-2
    • Rack Length: Narrowed 5" With Bronze Bushing
    • Title: Flaming River Narrw Pinto Mnl Rack
  • This manual rack and pinion is designed to meet top chassis builders standards for a new drag race steering gear. Manufactured to be sleek, lightweight and durable using high-quality, aluminum castings and chromed plated steel center tube.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-565C03A    FR1507-2  New

Qty:
In Stock & Ready to Ship
$451.14
Flaming River Rack and Pinion Assembly
  • 45 Omni Manual Rear Steer Rack and Pinion
  • Rack and Pinion: Omni R/P Manual - 45.0 OAL Rear steer
  • Product Attributes:
    • Bar CodePart No.: Fr1507-2
    • Pinion Style: Standard Pinions
    • Rack Length: 45"
    • Title: Flaming River 45 Omni Rs Rack
  • Designed for use with Musta

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-3CAE494    FR1507-3  New

Qty:
In Stock & Ready to Ship
$449.81
Flaming River Rack and Pinion Assembly
  • 41.7 Omni Manual Rear Steer Rack and Pinion
  • Rack and Pinion: Omni R/P Manual - 41.7 OAL Rear steer
  • Product Attributes:
    • Bar CodePart No.: Fr1507-3
    • Rack Length: 41.7 In.
    • Title: Flaming River 41.7 Omni Rs Rack
  • Designed for use with Musta

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-13C778A    FR1507C  New

Qty:
In Stock & Ready to Ship
$126.83
Flaming River Rack and Pinion Assembly
  • Omni Rack Mount Clamp with Bushing
  • Rack and Pinion Access: Omni Mounting Clamp w/Bushing
  • Product Attributes:
    • Bar CodePart No.: Fr1507c
    • Title: Flaming River Omni Rack Mount
  • Designed to be the perfect compliment to our manual rack and pinions.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 15 Products for Rack and Pinion Assembly.