Finish Selecting Your Vehicle

Choose your Submodel for your 2000 Ford Contour

  • Base
  • LX
  • Power
  • SE
  • SVT

Shop By Brand

The Following brands are available based on your search.

  • Advics
    Advics
  • Baer Brakes
    Baer Brakes
  • CARQUEST
    CARQUEST
  • Cardone
    Cardone
  • Centric
    Centric
  • Dorman
    Dorman
  • Dynamic Friction
    Dynamic Friction
  • Raybestos
    Raybestos
  • Tuff Stuff Performance Accessories
    Tuff Stuff Performance Accessories
  • Wearever
    Wearever

Showing Products For 2000 Ford Contour Brake Master Cylinder

Below are all the different brands and applications for 2000 Ford Contour Brake Master Cylinder

Showing 1 - 10 of 34 Products for Brake Master Cylinder.

Refine Your Search

Centric
2000 Ford Contour Brake Master Cylinder 4 Cyl 2.0L Centric - Centric Premium Brake Master Cylinders

P311-11904E6    130.61109  New

Qty:
In Stock & Ready to Ship
$88.71
Centric Brake Master Cylinder
  • Centric Premium Brake Master Cylinder
  • Match O.E. parts in quality; configuration and fitment. Complete with reservoirs; switches and floats. Original aluminum casting body design where applicable. Manufactured under the highest quality standards by OEM and OES manufacturers
  • Centric Premium Brake Master Cylinders
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Cylinder Bore Dia in: 0.9840
    • Cylinder Bore Dia mm: 25.00
    • Port Quantity: 4
    • Prop 65 [cntrc]: California Proposition 65
    • Push Rod Lgth / Depth: 1.75
  • The Centric Parts brake hydraulic program is the most complete and up-to-date in the industry and includes Brake Master and Wheel Cylinders; Brake Hoses; Caliper And Wheel Cylinder Repair Kits And Remanufactured Power Boosters. Centric Parts Brake Master Cylinders match original equipment parts in quality; configuration and fitment. Cylinders are complete with reservoirs; switches; and floats and are offered with the original aluminum casting body design where applicable.
Brand: Centric
Additional Fitment Information:
Vehicle BrakeABS Rear Brake Block Engine CID CC
2000 - Ford Contour Non-ABS Drum L 4 Cyl 2.0L 121 1989
Centric
2000 Ford Contour Brake Master Cylinder 4 Cyl 2.0L Centric - Centric Premium Brake Master Cylinders

P311-506C4E7    130.61116  New

Qty:
In Stock & Ready to Ship
$77.04
Centric Brake Master Cylinder
  • Centric Premium Brake Master Cylinder
  • Match O.E. parts in quality; configuration and fitment. Complete with reservoirs; switches and floats. Original aluminum casting body design where applicable. Manufactured under the highest quality standards by OEM and OES manufacturers
  • Centric Premium Brake Master Cylinders
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Cylinder Bore Dia in: 0.9840
    • Cylinder Bore Dia mm: 25.00
    • Port Quantity: 2
    • Prop 65 [cntrc]: California Proposition 65
    • Push Rod Lgth / Depth: 1.66
  • The Centric Parts brake hydraulic program is the most complete and up-to-date in the industry and includes Brake Master and Wheel Cylinders; Brake Hoses; Caliper And Wheel Cylinder Repair Kits And Remanufactured Power Boosters. Centric Parts Brake Master Cylinders match original equipment parts in quality; configuration and fitment. Cylinders are complete with reservoirs; switches; and floats and are offered with the original aluminum casting body design where applicable.
Brand: Centric
Additional Fitment Information:
Vehicle BrakeABS Rear Brake Block Engine CID CC
2000 - Ford Contour 4-Wheel ABS Drum L 4 Cyl 2.0L 121 1989
Raybestos
2000 Ford Contour Brake Master Cylinder Raybestos - Element3; New

P311-2D45B4F    MC390463  New

10-2878 , 10-2890 , 13-2878 , 13-2890 , 130.61109 , 13481 , 14765 , 83-34065 , F134460 , F7RZ2140BA , M3429 , M390463 , MC134460 , MC500510 , MCA390463 , NM4025

Qty:
In Stock & Ready to Ship
$211.58
Raybestos Brake Master Cylinder
  • Element3; New
  • Product Attributes:
    • Bore Size: 1.000
    • Master Cylinder Material: Aluminum
    • Mounting Hole Diameter: 0.359
    • Mounting Hole Quantity: 2
    • Port Quantity: 2
    • Primary Port Thread A: M10x1
    • Secondary Port Thread A: M12x1
Brand: Raybestos
Additional Fitment Information:
Vehicle BrakeABS
2000 - Ford Contour Non-ABS
Raybestos
2000 Ford Contour Brake Master Cylinder Raybestos - Element3; New

P311-5226C5F    MC390553  New

F7RZ2140DA , M630225 , MCA630225 , NM4026 , NMC2890

Qty:
In Stock & Ready to Ship
$79.77
Raybestos Brake Master Cylinder
  • Element3; New
  • Product Attributes:
    • Bore Size: 1.000
    • Master Cylinder Material: Aluminum
    • Mounting Hole Diameter: 0.343
    • Mounting Hole Quantity: 2
    • Port Quantity: 2
    • Primary Port Thread A: M12x1
    • Secondary Port Thread A: M12x1
Brand: Raybestos
Additional Fitment Information:
Vehicle BrakeABS
2000 - Ford Contour 4-Wheel ABS
Cardone
2000 Ford Contour Brake Master Cylinder Cardone - Brake Master Cylinder

P311-4D4F48B    13-2890  New

F7RZ2140DA

Qty:
In Stock & Ready to Ship
$74.56
Cardone Brake Master Cylinder
  • Reservoir Not Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30 F To +220 F To Ensure Reliable Performance During Your Daily Commute
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Pedal Rod Included: No
    • Port Quantity: 2
    • Primary Port Size: M12 X 1.0
    • Product Condition: New
    • Reservoir Included: No
    • Secondary Port Size: M12 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle BrakeABS
2000 - Ford Contour 4-Wheel ABS
Dynamic Friction
2000 Ford Contour Brake Master Cylinder Dynamic Friction - DFC Brake Master Cylinder

P311-548FB75    355-56017  New

Qty:
In Stock & Ready to Ship
$80.76
Dynamic Friction Brake Master Cylinder
  • DFC Master Cylinder
  • DFC Brake Master Cylinder
Brand: Dynamic Friction
Additional Fitment Information:
Vehicle Submodel BrakeABS
2000 - Ford Contour SE Non-ABS
Dorman
2000 Ford Contour Brake Master Cylinder Dorman

P311-593B906    M630225  New

10-2890 , 10-3017 , 13-2890 , 130.61116 , 130.61123 , 13866 , 13867 , F140460 , F142445 , F7RZ2140CA , F7RZ2140DA , M-81093 , M4026 , M4052 , MC140460 , MC142445 , MC390464 , MC390553 , NM4026

Qty:
In Stock & Ready to Ship
$85.63
Dorman Brake Master Cylinder
  • Brake Master Cylinder
  • Bore: 25 mm
  • Product Attributes:
    • Master Cylinder Bore Diameter: 25
    • Master Cylinder Material: Aluminum
    • Mounting Hardware Included: No
    • Number of Outlets: 2
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M12 X 1.0
    • Reservoir Included: No
    • Secondary Outlet Thread Diameter: 12
    • Sensor Included: No
  • Features:
    • Precise replacement - cylinder housing is constructed to match the casting material of the original part and ensure similar performance
    • Durable design - all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
    • 100% new - made entirely of new materials, not remanufactured, to ensure highest quality and safety
    • Strict specifications - made to meet rigorous SAE International standards
  • This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Brand: Dorman
Additional Fitment Information:
Vehicle BrakeABS
2000 - Ford Contour 4-Wheel ABS
Dorman
2000 Ford Contour Brake Master Cylinder Dorman

P311-5BB5DF4    M390463  New

10-2878 , 13-2878 , 130.61109 , 13481 , 18M857 , F134460 , F7RZ2140 , F7RZ2140BA , M4025 , M901361 , MC134460 , MC390463 , MC500510 , NM4025

Qty:
In Stock & Ready to Ship
$94.17
Dorman Brake Master Cylinder
  • Brake Master Cylinder
  • Bore: 1 In.
  • Product Attributes:
    • Master Cylinder Material: Aluminum
    • Mounting Hardware Included: No
    • Number of Outlets: 4
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M10 X 1.0
    • Reservoir Included: No
    • Secondary Outlet Thread Diameter: 12
    • Sensor Included: No
  • Features:
    • Precise replacement - cylinder housing is constructed to match the casting material of the original part and ensure similar performance
    • Durable design - all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
    • 100% new - made entirely of new materials, not remanufactured, to ensure highest quality and safety
    • Strict specifications - made to meet rigorous SAE International standards
  • This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Brand: Dorman
Additional Fitment Information:
Vehicle BrakeABS Brakes
2000 - Ford Contour Non-ABS Power
Advics
Brake Master Cylinder Advics

P311-02B0204    BMT-081  New

47201-3D141 , BMT-081

Qty:
In Stock & Ready to Ship
$84.17
Advics Brake Master Cylinder
  • Brake Master Cylinder
  • Product Attributes:
    • 158: New
  • ADVICS OE; OE style cylinder; OE quality rubber components; Cylinder body is anodized and "Kanizen" plated to strengthen the surface

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Advics
Additional Fitment Information:
Vehicle
Advics
Brake Master Cylinder Advics

P311-432AFDC    BMT-022  New

47201-60290 , BMT-022

Qty:
In Stock & Ready to Ship
$106.32
Advics Brake Master Cylinder
  • Brake Master Cylinder
  • Product Attributes:
    • 158: New
    • 645: 0.88
  • ADVICS OE; OE style cylinder; OE quality rubber components; Cylinder body is anodized and "Kanizen" plated to strengthen the surface

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Advics
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 34 Products for Brake Master Cylinder.