2000 Audi A6 Ignition Crank Trigger Sensor Ignition

Ignition Crank Trigger Sensor Holley

Part # P311-487E8A5 Manu # 554-118 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $192.48

Crank Sensor
Crank Sensor; Hall Effect; 3/4 in. 16 Thread; For Use w/Flying Magnets;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Hall Effect Crankshaft Signal Sensor
P/N 554-118 is designed as a drop-in sensor replacement for flying magnet crank trigger setups using a 3/4-16 in. threaded magnetic sensor. This sensor is a Hall Effect sensor, meaning it outputs a square wave signal, which is ideal for use with most Electronic Fuel Injection Systems. This sensor is to only be used with a trigger wheel with flying magnets. It does not detect a ferrous steel target.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Ignition Crank Trigger Sensor MSD

Part # P311-1344834 Manu # 8159 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $314.63

Non-Magnetic Pickup Assembly
Non-Magnetic Pickup Assembly; 3/8 in. x 24 x 1.5 in.; Non-Shielded 36 in.;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed And Built In-House 3/8 x 24 x 1.5
- Completely Potted
- Strain Relief
- Proprietary Bobbin And Winding Design
- For Use w/MSD Flying Magnet Crank
Each pickup is wound on special bobbins and terminated to ur tinned conductor. Teflon-jacketed wiring. A strain relief protects the wiring where it leaves the threaded housing. Once assembled, the wiring is placed in a vacuum chamber and the windings are potted in a fracture resistant epoxy component for durability in extreme conditions.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Crank Trigger Sensor MSD

Part # P311-10EC10D Manu # 8276 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $138.68

Non-Magnetic Pickup Assembly
Non-Magnetic Pickup Assembly; Large; 0.75 in. x 12 x 2.25 in.;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Replacement Pick-up
MSDs Non-Magnetic Pick-Ups are engineered for extreme applications. In fact, this Pick-Up was designed and tested on 300+ mph top fuel dragsters! To live up to MSDs demanding expectations in these extreme applications, we took it upon ourselves to design and build the Pick-Ups in-house. This way we can control every aspect of their assembly and quality. Each Pick-Up is hand wound on a special bobbin and terminated to our tinned conductor, teflon jacketed wiring. These wires are also routed through a strain relief for protection. This assembly is then installed into the precision housing and is potted with a fracture resistant epoxy compound. To ensure that the windings are entirely encased in epoxy, the Pick-Ups undergo a vacuum procedure to remove any air inside the housing. All of these procedures are necessary to produce the strongest, most reliable non-magnetic Pick-Up available.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Crank Trigger Sensor MSD

Part # P311-24CB73B Manu # 8278 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $198.45

Hall Effect Crank Trigger Pickup Sensor
Hall Effect Crank Trigger Pickup Sensor; 3/4 x 16 in. Threaded;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Most Accurate Way To Trigger Your Electronic Fuel Injection
- Effect Sensor That Is Less Susceptible To Noise Interference
- Supplied With Mating 3 Pin Connector And Pins And Seals
PN 8278 is the replacement Hall Effect Sensor for flying magnet crank trigger setups using a 3/4-16 threaded. This sensor is a Hall Effect sensor, meaning it outputs a square wave signal, which is ideal for use with most Electronic Fuel Injection Systems. This sensor is to only be used with a trigger wheel with flying magnets. It does not detect a ferrous steel target.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Crank Trigger Sensor MSD

Part # P311-1FA3D37 Manu # 8505 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $193.23

Metal Magnetic Pickup Assembly
Metal Magnetic Pickup Assembly; 0.75 in. x 16 UNF;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Replacement Pickup That Require A Magnetic Pickup
- For Old Style Crank Triggers
- The Pickup Is .75 x 16 x 2.25
This is a replacement pickup for older style crank trigger systems that require a magnetic pickup. This pickup is magnetic and must be used with a trigger wheel equipped with steel studs to create a signal. The pickup is .75 x 16 x 2.25.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Shop By Brand

Showing Products For 2000 Audi A6 Ignition Crank Trigger Sensor