2000 Audi A6 Ignition Control Module Ignition - Accel, Bremi, Holley, MSD, Mallory, Pertronix, Proform, Standard Ignition

Ignition Control Module MSD

Part # P311-1845599 Manu # 6427 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $518.77

6CT Series Circle Track Ignition Controller
6CT Series Circle Track Ignition Controller; Built-In Start Retard; 0/10/20 Degree Increments; LED Display; Works On 4/6/8 Cyl. Engines; Single Plug-In Connector; Universal;
Product Attributes:
- Current Draw: .8 Amp Per 1000 Rpm
- Primary Voltage: 135mj W/ Blaster Coil; 150mj W/ Hvc Coil
- RPM: 12000
- Secondary Voltage: 45000
- Spark Duration: 20 Degree Crankshaft Rotation
- Spark Energy: 135mj W/ Blaster Coil; 150mj W/ Hvc Coil
- Voltage: 6-18 V
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Smoothest MSD rev limiter yet! Wont upset chassis/easy on parts.
- Large
- Easy To Read LED Display
- Simple setup of features such as the rev limiter
- Three rotary dials on the face of the unit
- Easy Setup Of Features w/Three Rotary Dials On Unit Face
- Adjustable In 0
- 10 Or 20 Increments
- Displ. rev limit/highest RPM/cyl. select/start retard/batt. volt
- Can be set to tach mode
- Full Delivery of Spark Energy Down to 6 Volts Battery Supply
- Highly efficient
- low current draw for extended battery life
- Fully potted housing to stand up to demanding race conditions
- Single plug-in connector for clean wiring
Superior design makes the 6CT Circle Track Ignition Control unit the most advanced and durable ignition to ever hit a circle track. Packed with legendary MSD Ignition power, the 6CT offers a slew of features. A large digital LED display makes it easier than ever to see the rev limiter setting when dialing it in using the laser etched rotary dials on the face of the unit. Rev limiting is controlled via microprocessor making it so smooth the chassis is virtually undisturbed when charging into turns. The rotary dials are also used to set cylinder select for 4, 6, and 8 cylinder engines, and to adjust the built-in start retard providing options of 0 Degree, 10 Degree or 20 Degree of timing retard for quick starts. As an added bonus the LED display can be used as a live tach or will display your racecars battery voltage. The unit records the highest RPM your engine turned during the race which can be easily recalled on the LED display as well. The 6CT offers all this and more in an epoxy filled, cast aluminum housing to prevent damage to the circuit board. Its rugged build make is ideal to handle the rigors of dirt track racing while its advanced digital control make it reliable for countless laps around the track. Its finished off with a single sealed connector to keep wiring dry and tidy.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-52BF88F Manu # 65303 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $563.89

6AL-2 Programmable Ignition Controller
6AL-2 Programmable Ignition Controller; For Use In Street/Racing Applications; PC Programmable 3-Step Rev Limiter [100 RPM Increments]; Capacitive Discharge Technology; Black;
Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Advanced features allow for use in street and racing applications
- PC Programmable w/Easy-to-use Windows based Pro-Data +Software
- Plot A Boost Timing Map w/0.1 Deg. Per Psi Accuracy
- Programmable 3-Step Rev Limiter (100 RPM increments)
- Step retard for nitrous applications plus a boost timing map
- Capacitive Discharge tech. for fast rise time/max. spark energy
The Programmable 6AL-2 lets you lock out the distributor and program a timing curve via a PC. Youll also be able to set a 2-Step Rev Limiter, a retard for use with nitrous and even a boost timing curve for forced induction engines! The Programmable 6AL-2 shares the same advanced features of the new 6AL-2 with 535 primary volts and spark energy reaching 135 mJ! Vibration mounts, wiring and a PC cable are supplied. Must use MSD Pro-Data+ Software to program.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-04774A5 Manu # 8000 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $2,145.68

Pro 600 Capacitive Discharge Ignition
Pro 600 Capacitive Discharge Ignition; 8 Channel; For High Cylinder Pressure/High Horsepower Engines Running Coil Near Plug Ignition;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Eight Outputs Of Up To 680 Mj Of Energy
- All Necessary Wiring Harnesses Included
- 50 Kilovolts Output Voltage When Used With Msd Suggested Coils
- Spark Duration Of Greater Than 300 Microseconds
- 6 Volts Minimum Required For Starting And Running
- 12 Volts Minimum Required For 600 Mj Operation
- Maximum Operating Voltage 22V
- Direct Plugin To Holley Efi Systems
- Compatible With Most Efi Systems
- Including 5V Or 12V Drivers
- Reverse Battery Protection
- Diagnostic Leds Help Troubleshoot Issues Should They Arise
Introducing MSDs PRO 600 CDI 8-channel capacitive discharge ignition. Designed for coil-near-plug engine management systems such as Holley EFI, GM LS platforms, and most other EFI systems, the PRO 600 is also capable of easily converting any distributor type ignition into a coil-near-plug system. When youre making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means youre leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. The PRO 600 has built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. A programmable power setting allows racers to switch between a user adjustable 250 to 400 millijoule output, or the industry-leading output of 680 millijoules via an activation wire or software - making the PRO 600 ideal for Drag Week style cars. Turn it down for the long haul, and then set it to kill mode at the strip.Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail - the PRO 600 is the answer.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-2C3456F Manu # 6428 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $563.89

6CT PRO Circle Track Ignition Controller
6CT PRO Circle Track Ignition Controller; Built-In Start Retard; 0/10/20 Deg. Increments; LED Display; For 4/6/8 Cyl. Eng.; Single Plug-In Connector; Quick Reset High RPM Recall;
Product Attributes:
- Current Draw: .8 Amp Per 1000 Rpm
- Item Weight: 2.500 Lbs.
- Primary Voltage: 135mj W/ Blaster Coil; 150mj W/ Hvc Coil
- RPM: 12000
- Secondary Voltage: 45000
- Spark Duration: 20 Degree Crankshaft Rotation
- Spark Energy: 135mj W/ Blaster Coil; 150mj W/ Hvc Coil
- Voltage: 6-18 V
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Smoothest MSD Rev Limiter Yet! Wont Upset Chassis/Easy On Parts
- Large
- Easy To Read LED Display
- Records Highest RPM Engine Turned Within Last 20 Mins/Run Time
- Highest RPM Can Quickly Be Reset w/External Momentary Switch
- Easy Setup Of Features w/Three Rotary Dials On Unit Face
- Built-In Start Retard In 0/10/20 Degree Increments
- Displ. rev limit/highest RPM/cyl. select/start retard/batt. volt
- Full Delivery of Spark Energy Down to 6 Volts Battery Supply
- Highly efficient
- low current draw for extended battery life
- Fully potted housing to stand up to demanding race conditions
- Single plug-in connector for clean wiring
- Reverse Polarity/Overheat Protection Provide Ultimate Reliability
Based on the superior design of the MSD 6CT, the 6CT PRO adds another offering to MSDs line of technologically advanced ignitions for circle track racing. Packed with legendary MSD Ignition power, the 6CT PRO offers a slew of features. A large digital LED display makes it easier than ever to see the rev limiter setting when dialing it in using the laser etched rotary dials on the face of the unit. Rev limiting is controlled via microprocessor making it so smooth the chassis is virtually undisturbed when charging into turns. The rotary dials are also used to set cylinder select for 4, 6, and 8 cylinder engines, and to adjust the built-in start retard providing options of 0 Degree, 10 Degree or 20 Degree of timing retard for quick starts. As an added bonus, the LED display can be used as a live tach or will display your racecars battery voltage. The unit records the highest RPM your engine turned during the race, which can be recalled easily on the LED display and is quickly reset using a remote, momentary switch. The 6CT PRO offers all this and more in a fully potted housing that utilizes a single connector to keep wiring tidy.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-25294F0 Manu # 7531 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,072.82

Digital-7 Plus Programmable Ignition Control
Digital-7 Plus Programmable Ignition Control; Map Sensor Is Required;
Product Attributes:
- Current Draw: 1.1 Amp Per 1000 Rpm
- Primary Voltage: 535
- RPM: 12500
- Secondary Voltage: 40000
- Spark Duration: 20 Degree Crankshaft Rotation
- Spark Energy: 190 Mj Per Spark
- Voltage: 12-18 V; Negative Ground
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Map a complete timing curve for every gear.
- Output to activate a device through rpm
- time or pressure inputs.
- Automatic magnetic pickup compensation
- For crank triggers or distributor pick- ups.
- Program your engines firing order
- Ease the setting of cylinder-to-cylinder timing.
- Cam sync output for fuel controllers or data acquisition.
- Vacuum advance/boost retard is selectable through a MAP sensor.
- Program an rpm limit that is ramped in during the launch.
- Select the rpm limiter value in rpm/seconds.
- Acquire 20 seconds of run data incl. two seconds prior to launch.
- View ignition events in a new Launch History window
If youre a consummate engine tuner and know how to take advantage of minute changes in timing during a quarter-mile pass, then the Programmable Digital-7 Plus is the ignition for you! All of the standard programmable features such as Individual Cylinder Management, Step Retards, Rev Limits, Shift Points, and more are included in the Plus version but you also get more. Much, much more. A MAP sensor is required for the boost circuit. The Ignition is supplied with wiring harnesses, mounting hardware, an RS232 computer harness, and the Pro-Data+ software on a mini-CD. Note: Illegal for use in NHRA classes except Pro Mod. The Programmable-7 Series of ignition controls has been updated with the Power Grid Ignition System

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-189B79A Manu # 6631 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $865.85

6HVC-L Ignition Controller
6HVC-L Ignition Controller; w/Rev Limiter; Race Only;
Product Attributes:
- Primary Voltage: 550
- RPM: 15000
- Secondary Voltage: 40000
- Spark Duration: 20 Degree Crankshaft Rotation
- Spark Energy: 150 Mj Per Spark
- Voltage: 12-18 V; Negative Ground
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Includes built-in Fast rev limiter
- Must Be Used w/HVC Coil PN[8250]
- Built-in reverse polarity protection circuit
- 150 Millijoules Per Spark Up To 15000 RPM
- 550 Primary Voltage Output To Coil
- Accepts breaker points/amplifier/magnetic pickup trigger inputs
- Multiple sparks for 20 degrees of crankshaft rotation
- 6-pin Weathertight Connector
- Mandatory For NASCAR Use
- Clear epoxy potting compound for vibration protection
- Clear base plate for easy tech inspection
- No CARB Exemption Order Number
Professional race teams have been relying on the power and endurance of our 6 HVC Ignition Control. The advanced component design and circuitry of the 6 HVC Ignitions produce incredible voltage with high current output. Internally there is an efficient heat sync, solid component mounting and its all encased in a clear epoxy. The rpm limit is adjustable with plug-in modules and the wiring is routed into NASCAR approved Deutsch style MSD connectors. The Fast Rev limiter is very quick and accurate compared to our Soft Touch Rev limiter.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-3694467 Manu # 6560 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $563.89

MSD 6M-2L Marine Ignition
MSD 6M-2L Marine Ignition; w/Rev Limiter; Weather-Proof Housing w/Weathertight Connectors;
Product Attributes:
- Current Draw: 1 Amp Per 1000 Rpm
- Primary Voltage: 460-480
- RPM: 15000
- Secondary Voltage: 45000
- Spark Duration: 20 Degree Crankshaft Rotation
- Spark Energy: 105-115 Mj Per Spark
- Voltage: 12-18 V; Negative Ground
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- MSDs Popular 6M-2 w/Built-In Rev-Limiter
- Multiple sparks improve starting/throttle response/idle quality
- Circuitry is potted for a weather-proof housing
- Weathertight connectors protect wiring from water and chemicals
The MSD 6M-2L Ignition Control is designed for performance marine applications where a high energy and reliable ignition is a necessity. The capacitive discharge (CD) design of the MSD produces full power sparks throughout your boats entire rpm range. Below 3,000 rpm, a series of multiple sparks burn in the cylinder for 20 Degree of crankshaft rotation ensuring complete combustion. Together, these sparks produce easier starting, great throttle response, more power and reduced plug fouling during idling. Weathertight connectors securely lock together to provide reliable connections that are unaffected by water, oil, gasoline and most other chemicals associated with boats. The 6M-2Ls electrical circuitry from marine conditions, the entire unit is potted with a polyurethane compound. This material prevents the electrical components from coming into contact with water or other chemicals. The 6M-2L also features a built-in Soft Touch Rev Control that will save your engine from overrev damage. The rpm limit is set with sealed rpm modules (see below). The 6M-2L can be triggered by either a magnetic pickup (distributor or crank trigger), amplifier or by a breaker point distributor. The cable harness has the proper connector so you can plug the 6M-2L into one of the Pro-Billet MSD Marine distributors.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-1409C74 Manu # 6530 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $563.89

6AL Programmable Ignition Controller
6AL Programmable Ignition Controller; For Use In Street/Racing Applications; PC Programmable 3-Step Rev Limiter [100 RPM Increments]; Capacitive Discharge Technology; Red;
Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Advanced features allow for use in street and racing applications
- PC Programmable w/Easy-to-use Windows based Pro-Data +Software
- Plot A Boost Timing Map w/0.1 Deg. Per Psi Accuracy
- Programmable 3-Step Rev Limiter (100 RPM increments)
- Step retard for nitrous applications plus a boost timing map
- Capacitive Discharge tech. for fast rise time/max. spark energy
The Programmable 6AL-2 lets you lock out the distributor and program a timing curve via a PC. Youll also be able to set a 2-Step Rev Limiter, a retard for use with nitrous and even a boost timing curve for forced induction engines! The Programmable 6AL-2 shares the same advanced features of the new 6AL-2 with 535 primary volts and spark energy reaching 135 mJ! Vibration mounts, wiring and a PC cable are supplied. Must use MSD Pro-Data+ Software to program.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-11F0795 Manu # 6425 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $349.59

Digital-6AL Ignition Controller
Digital-6AL Ignition Controller; For 4/6/8 cyl. Engines; w/Soft Touch Rev Control; Red;
Product Attributes:
- Current Draw: 1.1 Amp Per 1000 Rpm
- Primary Voltage: 520-540
- RPM: 11000
- Secondary Voltage: 45000
- Spark Duration: 20 Degree Crankshaft Rotation
- Spark Energy: 135-145 Mj Per Spark
- Voltage: 12-15 V; 7 V Start
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- High Output w/530 Volts And 135Mj Of Spark Energy
- Efficient components use less current to produce more power
- Set An Rpm Limit w/Two Rotary Dials In 100 Rpm Increments
- Built-in LED for system checks
- All wires exit through a locked
- sealed connector
- Compatible w/4/6/8 Cylinder Engines
The MSD 6AL Ignition Control set the standards that other ignitions strive to reach. In fact, youll find ignitions from other companies that carry the 6AL name (and in some cases, the same part number). MSD raised the bar even higher with the revised Digital 6AL Ignition Control! The wiring of the Digital 6AL is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean. The rev-limiter of the 6AL is located right on top of the housing for easy access to the two rotary dials to set the limit in 100 rpm increments. Inside the Digital 6AL, youll find a microprocessor that monitors and controls every firing and rev limit. The circuits are updated with efficient components that help the ignition produce more power while drawing less current! In fact, the Digital 6AL delivers over 530 volts to the coil with up to 135mJ of spark energy for every firing! Increased output combined with MSDs proven multiple spark series is a win-win situation! The Digital 6AL is supplied with the wiring harness and the components youll need for installation. The 6AL is also supplied with vibration mounts. Both ignitions are compatible on 4, 6, or 8-cylinder engines with 12-volt, negative ground electrical systems. Theyll accept trigger inputs from breaker points, amplifiers, and magnetic pickups.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-3A9393F Manu # 7222 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $853.95

7AL-2 Plus Ignition Controller
7AL-2 Plus Ignition Controller; Includes Vibration Mounts/RPM Modules; Race Only; Red;
Product Attributes:
- Current Draw:
  - 12 Amp At 12000 Rpm
  - 6 Amp Per 6000 Rpm
- Primary Voltage: 570
- RPM: 14000
- Secondary Voltage: 47000
- Spark Duration: 20 Degree Crankshaft Rotation
- Spark Energy: 160 Mj Per Spark
- Voltage: 12-18 V; Negative Ground
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Built-in 2-step rev control
- Operates On 4/6/8 Cylinder Engines
- Diagnostic Troubleshooting LED
- Terminal strips for convenient hookup
Youll recognize the 7AL-2 Plus Ignition Control, as its predecessor is the most popular ignition control used in drag racing. The Plus model updates the original 7AL-2 with improved internal components plus our engineers added a 2-Step Rev Control and a useful diagnostic LED. Racers will be happy to see that the updated components up the voltage output and spark energy! Over 40 Percent more spark energy in fact! Visually, youll notice the two terminal strips that allow for easier wiring in your race car. The LED over the power connections will come in handy for troubleshooting as it flashes only when the coil fires. That way you know that the coil, the trigger source and ignition are all functioning properly. The mounting pattern is the same as the 7AL-2 and is supplied with vibration mounts and a few rpm modules.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2000 Audi A6 Ignition Control Module