802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Engine for your 2000 Audi A4

  • 4 Cyl 1.8L
  • 6 Cyl 2.8L

Shop By Brand

The Following brands are available based on your search.

  • Corteco
    Corteco
  • Elring
    Elring
  • National Bearing
    National Bearing
  • Timken
    Timken
  • Victor Gaskets
    Victor Gaskets
  • Victor Reinz
    Victor Reinz

Showing Products For 2000 Audi A4 Engine Crankshaft Seal

Below are all the different brands and applications for 2000 Audi A4 Engine Crankshaft Seal

Showing 1 - 10 of 12 Products for Engine Crankshaft Seal.

Refine Your Search

Victor Reinz
2000 Audi A4 Engine Crankshaft Seal 4 Cyl 1.8L Victor Reinz

P311-302D8A9    W0133-1621419  New

Qty:
$45.29
Victor Reinz Engine Crankshaft Seal
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Includes Rear Crankshaft Seal Flange
Brand: Victor Reinz
Additional Fitment Information:
Vehicle Block Engine CID CC
2000 - Audi A4 L 4 Cyl 1.8L - 1781
Victor Reinz
2000 Audi A4 Engine Crankshaft Seal 4 Cyl 1.8L Victor Reinz

P311-5AA5E07    W0133-1638261  New

Qty:
$19.49
Victor Reinz Engine Crankshaft Seal
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation.
Brand: Victor Reinz
Additional Fitment Information:
Vehicle Block Engine CID CC
2000 - Audi A4 L 4 Cyl 1.8L - 1781
Elring
2000 Audi A4 Engine Crankshaft Seal 4 Cyl 1.8L Elring

P311-3649554    W0133-1638261  New

Qty:
$21.66
Elring Engine Crankshaft Seal
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation.
  • *Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed**
  • 47x10
Brand: Elring
Additional Fitment Information:
Vehicle Block Engine CID CC
2000 - Audi A4 L 4 Cyl 1.8L - 1781
Elring
2000 Audi A4 Engine Crankshaft Seal 6 Cyl 2.8L Elring

P311-1DE2B19    W0133-1735846  New

Qty:
$36.25
Elring Engine Crankshaft Seal
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 35X48X10
  • Front
Brand: Elring
Additional Fitment Information:
Vehicle Block Engine CID CC
2000 - Audi A4 V 6 Cyl 2.8L - 2771
National Bearing
2000 Audi A4 Engine Crankshaft Seal - Rear 6 Cyl 2.8L National Bearing

P311-5A1138D    716102  New

30862835 , 342.093 , 068-103-051P , W10-704 , 271680-1 , 021-103-051C , 056103051D , 068-198-171A , 068-103-051A , 999.113.476.40 , W10-900 , 66973 , M862835 , 948.101.212.02 , 049-103-051C , 97510800 , 81-23708-40 , 67787 , 3547000 , 95VW-6701-AA , 0000150245 , 66954 , 948.101.212.01 , 997.101.212.00 , 068-198-171 , 7700595940 , 997.101.212.01 , 33416 , 052-3138 , U49-8262 , 33412 , 068-103-051G , 068-198-171S , W10-719 , 3287542-9 , 17230 , T0695940 , 50-319183-00 , N33412 , 068-103-053 , 17080 , 068103051L , 271680 , 4094810 , 7700714701 , 81-34819-00 , JV643 , JV567 , 1257049-5 , 6503095 , 955.101.051.00 , NA5133 , 0514.40 , 15-01500 , 716102 , 51440 , 1257049 , 068-103-071F , 17221 , 1005303 , 056-103-051D , 026103051A , 15-02009 , 026-103-051A , L-0080-004 , 999.113.490.40 , 7700695940 , 026-103-051B , 53103173

Qty:
$24.68
National Bearing Engine Crankshaft Seal  Rear
  • Multi Purpose Seal
  • 4.145" O.D. 0.433" width
  • Product Attributes:
    • Feature 1: Low Swell In Hydrocarbon Fluids
    • Feature 2: Design Type: Spring Loaded; Multi-lip
    • Feature 3: Provides Good Low Temperature Capability
    • Feature 4: Temperature Range: -40°f To 225°f; -40°c To 107°c
    • Feature 5: Delivers Quality And Reliable Performance For Every Type Of Repair
    • Inside Diameter:
      • 3.346
      • 85.000
    • Outside Diameter:
      • 105.280
      • 4.145
    • Sealing Material: Nitrile
    • Thickness:
      • 0.433
      • 11.000
  • National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Brand: National Bearing
Position: Rear
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2000 - Audi A4 Rear V 6 Cyl 2.8L - 2771
National Bearing
2000 Audi A4 Engine Crankshaft Seal - Front 6 Cyl 2.8L National Bearing

P311-04176B8    3476  New

NA5124 , 068-103-085G , 056103085B , 8130259 , 068 103 085 E , 12573310 , 66960 , 15-02000 , 028-103-086A , JV983 , 3250259 , 026 103 085 F , W10-653 , 026-103-085E , 4186220 , U49-8556 , 038-103-085F , 5240542 , 038-103-085D , 211-7904 , 12733 , 14247 , 12730 , 897.690 , 67788 , 81-34368-00 , NA5001 , L-0080-003 , 67132 , 052-3139 , 038 103 085 A , 056-103-085 , 81-19299-10 , 325.155 , N5124 , 026-103-085J , 15-00121 , 67773 , 81-34367-00 , 14256 , 030-103-085A , 068-103-085Q , 026-103-085D , 068-103-085R , 50-319433-00 , 038 103 085 C , 026-103-085 , 068-105-085E , 056-103-085B , 50-303185-50 , N5001 , 67772 , 66982 , 129.780 , 068-103-085F , 56103085 , 06B-103-085A , 12731 , 15-02107 , 028-103-086 , 056-103-085E , 66548 , 068-103-085A , 026-103-085F , 03L-103-085 , 65-03087 , N12730 , 3476S , 15-01917 , 052-4005 , 068-103-085E , 94051420 , NB446 , JV982 , 1257221-0

Qty:
$9.50
National Bearing Engine Crankshaft Seal  Front
  • Multi Purpose Seal
  • 1.86" O.D. 0.394" width
  • Product Attributes:
    • Feature 1: Low Swell In Hydrocarbon Fluids
    • Feature 2: Design Type: Spring Loaded; Multi-lip
    • Feature 3: Provides Good Low Temperature Capability
    • Feature 4: Temperature Range: -40°f To 225°f; -40°c To 107°c
    • Feature 5: Delivers Quality And Reliable Performance For Every Type Of Repair
    • Inside Diameter:
      • 1.260
      • 32.000
    • Outside Diameter:
      • 1.860
      • 47.240
    • Sealing Material: Polyacrylate
    • Thickness:
      • 0.394
      • 10.000
  • National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.
Brand: National Bearing
Position: Front
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2000 - Audi A4 Front V 6 Cyl 2.8L - 2771
Corteco
2000 Audi A4 Engine Crankshaft Seal 6 Cyl 2.8L Corteco - with Sealing Flange

P311-2AB3549    W0133-1608023  New

Qty:
$82.20
Corteco Engine Crankshaft Seal
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Crankshaft Cover Gasket is Also Recommended
  • with Sealing Flange
  • Rear
Brand: Corteco
Additional Fitment Information:
Vehicle Block Engine CID CC
2000 - Audi A4 V 6 Cyl 2.8L - 2771
Timken
2000 Audi A4 Engine Crankshaft Seal - Front Timken

P311-0F0817F    1108  New

Qty:
$12.95
Timken Engine Crankshaft Seal  Front
  • Grease/Oil Seal
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.
Brand: Timken
Position: Front
Additional Fitment Information:
Vehicle Position
2000 - Audi A4 Front
Timken
2000 Audi A4 Engine Crankshaft Seal - Front 4 Cyl 1.8L Timken

P311-52A1831    3476S  New

Qty:
$10.10
Timken Engine Crankshaft Seal  Front
  • Grease/Oil Seal
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.
Brand: Timken
Position: Front
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2000 - Audi A4 Front L 4 Cyl 1.8L - 1781
Victor Gaskets
2000 Audi A4 Engine Crankshaft Seal - Rear 4 Cyl 1.8L Victor Gaskets

P311-133991A    67750  New

06A 103 171 A , BS 40187 , 028 103 171 B , BS 40724

Qty:
$36.85
Victor Gaskets Engine Crankshaft Seal  Rear
  • Engine Crankshaft Seal
  • Includes Retainer PTFE
  • Product Attributes:
    • Additional Package Contents: Retainer
    • Item Grade: Oem Standard
    • Seal Material: Rubber
    • Seal Style: One Piece
  • MAHLE Original® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Brand: Victor Gaskets
Position: Rear
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2000 - Audi A4 Rear L 4 Cyl 1.8L - 1781

Showing 1 - 10 of 12 Products for Engine Crankshaft Seal.