Finish Selecting Your Vehicle

Choose your Submodel for your 1999 Volkswagen Jetta

  • GL
  • GLS
  • Wolfsburg Edition

Shop By Brand

The Following brands are available based on your search.

  • Accudrive Racks
    Accudrive Racks
  • Atlantic Automotive Eng.
    Atlantic Automotive Eng.
  • Atlantic Automotive Enterprise
    Atlantic Automotive Enterprise
  • Autopart International
    Autopart International
  • BBB Industries
    BBB Industries
  • Bosch
    Bosch
  • Cardone
    Cardone
  • Flaming River
    Flaming River
  • Ford Racing
    Ford Racing
  • Mapco
    Mapco
  • Maval
    Maval
  • TRW
    TRW
  • Vaico
    Vaico

Showing Products For 1999 Volkswagen Jetta Rack and Pinion Assembly

Below are all the different brands and applications for 1999 Volkswagen Jetta Rack and Pinion Assembly

Showing 1 - 10 of 33 Products for Rack and Pinion Assembly.

Refine Your Search

Cardone
1999 Volkswagen Jetta Rack and Pinion Assembly 4 Cyl 1.9L Cardone - Rack and Pinion Assembly

P311-1954653    26-9004  Remanufactured

1J0422803A , 1J0422803B , 1J0422803D , 1J0422804A , 1J0422804B , 1J0422804D , 1J1422055AN , 1J1422061AA , 1J1422061AN , 1J1422061N , 1J1422062F

Qty:
In Stock & Ready to Ship
$45.00 $244.76
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 4.13
    • Distance Between Mounting Holes (mm): 104.78
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: Banjo/washer
    • Input Shaft Diameter (in): 0.65
    • Input Shaft Diameter (mm): 16.43
    • Input Shaft Length (in): 2.63
    • Input Shaft Length (mm): 66.68
    • Package Contents: Rack And Pinion, Instruction Sheet
    • Pressure Port Thread Size: M14 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 49.50
    • Rack Length (mm): 1257.30
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.23
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
1999 - Volkswagen Jetta DIESEL L 4 Cyl 1.9L 116 1896
Cardone
1999 Volkswagen Jetta Rack and Pinion Assembly 4 Cyl 2.0L Cardone - Rack and Pinion Assembly

P311-512972D    26-1815  Remanufactured

191422803A , 191422804A , 1H0422803 , 1H0422803A , 1H0422803B , 1H0422803D , 1H0422803E , 1H0422804 , 1H0422804A , 1H0422804B , 1H0422804D , 1H0422804E , 1H1422055 , 1H1422055A , 1H1422061 , 1H1422061C , 1H1422061D , 1H1422803A , 1HM422055D , 1HM422055F , 1HM422061A , 535422061B

Qty:
In Stock & Ready to Ship
$17.10 $198.51
Cardone Rack and Pinion Assembly
  • with TRW Gear Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 3.81
    • Distance Between Mounting Holes (mm): 96.85
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.69
    • Input Shaft Diameter (mm): 17.42
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 50.63
    • Rack Length (mm): 1285.88
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 50.80
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine Designation Block Engine CID CC
1999 - Volkswagen Jetta ABA L 4 Cyl 2.0L 121 1984
Atlantic Automotive Eng.
1999 Volkswagen Jetta Rack and Pinion Assembly Atlantic Automotive Eng. - w/o Outer Tie Rod Ends

P311-313B457    W0133-1734704  New

Qty:
In Stock & Ready to Ship
$547.63
Atlantic Automotive Eng. Rack and Pinion Assembly
  • 100% New Complete Long Rack
  • TRW Type
  • w/o Outer Tie Rod Ends
Brand: Atlantic Automotive Eng.
Additional Fitment Information:
Vehicle Submodel Engine Designation Manuf. Body Code
1999 - Volkswagen Jetta GLS ABA A3
Cardone
1999 Volkswagen Jetta Rack and Pinion Assembly 4 Cyl 2.0L Cardone - Rack and Pinion Assembly

P311-4B0CFDC    26-1827  Remanufactured

1H0422803A , 1H0422803B , 1H0422804A , 1H0422804B , 1H1422055D , 1H1422061C , 1H1422061D , 1H422061DX

Qty:
In Stock & Ready to Ship
$78.30 $204.26
Cardone Rack and Pinion Assembly
  • with ZF Gear Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 3.81
    • Distance Between Mounting Holes (mm): 96.85
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.75
    • Input Shaft Diameter (mm): 19.05
    • Input Shaft Length (in): 1.06
    • Input Shaft Length (mm): 27.00
    • Package Contents: Rack And Pinion, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 50.56
    • Rack Length (mm): 1284.30
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 50.80
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine Designation Block Engine CID CC
1999 - Volkswagen Jetta ABA L 4 Cyl 2.0L 121 1984
Accudrive Racks
1999 Volkswagen Jetta Rack and Pinion Assembly Accudrive Racks

P311-14D8079    25576  New

Qty:
In Stock & Ready to Ship
$100.00 $282.98
  • VW Beetle, Golf, Jetta
  • Power Rack
Brand: Accudrive Racks
Additional Fitment Information:
Vehicle
1999 - Volkswagen Jetta
Maval
1999 Volkswagen Jetta Rack and Pinion Assembly Maval - w/o Outer Tie Rod Ends

P311-56A346D    W0133-1734320  New

Qty:
In Stock & Ready to Ship
$170.00 $393.41
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Remanufactured - Power Steering - ZF Unit
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle Submodel Engine Designation Manuf. Body Code
1999 - Volkswagen Jetta GLS ABA A3
Mapco
1999 Volkswagen Jetta Rack and Pinion Assembly Mapco

P311-1E0BB9D    9187M  New

191-422-055J , 26-1815 , 3180

Qty:
In Stock & Ready to Ship
$150.00 $245.71
  • RACK AND PINION COMPLETE UNIT
  • To 5/99 (All Models w/TRW Design)
Brand: Mapco
Additional Fitment Information:
Vehicle
1999 - Volkswagen Jetta
Mapco
1999 Volkswagen Jetta Rack and Pinion Assembly Mapco

P311-2B0DBDD    9359MN  New

1J1-422-055AM , 26-9004 , 3184

Qty:
In Stock & Ready to Ship
$374.32
  • RACK AND PINION COMPLETE UNIT
  • (From 6/99) Unit overall length is 49 5/8".
Brand: Mapco
Additional Fitment Information:
Vehicle
1999 - Volkswagen Jetta
Mapco
1999 Volkswagen Jetta Rack and Pinion Assembly Mapco

P311-2C5B8E4    9241M  New

1H1-422-055C , 26-1827 , 3280

Qty:
In Stock & Ready to Ship
$150.00 $245.71
  • RACK AND PINION COMPLETE UNIT
  • To 5/99 (All Models w/ZF Design)
Brand: Mapco
Additional Fitment Information:
Vehicle
1999 - Volkswagen Jetta
Mapco
1999 Volkswagen Jetta Rack and Pinion Assembly Mapco

P311-43487A3    9359M  New

1J1-422-055AM , 26-9004 , 3184

Qty:
In Stock & Ready to Ship
$150.00 $302.41
  • RACK AND PINION COMPLETE UNIT
  • (From 6/99) Unit overall length is 49 5/8".
Brand: Mapco
Additional Fitment Information:
Vehicle
1999 - Volkswagen Jetta

Showing 1 - 10 of 33 Products for Rack and Pinion Assembly.